!  File:  3071C.PROP
!  Database:  PEPDB
!  Date:  18-FEB-1994:14:36:09

coverpage:

  title_1:         HSP TARGET ACQUISITION TEST HSP-02 (TUBE POL)
    proposal_for:  SV/HSP
    pi_fname:      ROBERT
    pi_mi:         C.
    pi_lname:      BLESS
    pi_inst:       UNIVERSITY OF WISCONSIN
    pi_country:    USA
    pi_phone:      (608)262-1715
    hours_pri:     1.63
    num_pri:       1
! end of coverpage

abstract:

    line_1:        Alignment test: @(#)1381.sh     1.15 (9/20/90).
    line_2:        Batch edit: @(#)1381.fix 1.3 (9/11/90).
    line_3:        This proposal outlines the test procedure for verifying
    line_4:        HSP Mode II target acquisition (on-board) capability
    line_5:        for each of the four IDTs on the HSP.  Using a stellar
    line_6:        source in the CVZ, each IDT will have the target placed
    line_7:        in its finding aperture where a small area scan is
    line_8:        taken to confirm the location of the star; additional
    line_9:        pointing commands will then position the source in a
    line_10:       selected aperture.  This test verifies the interaction
    line_11:       of HSP with the HST Pointing Control System (PCS) and
    line_12:       serves to check the HST-HSP mechanical alignment.

!
! end of abstract

general_form_proposers:

  lname:           BLESS
    fname:         R.
    mi:            C.
    inst:          UNIVERSITY OF WISCONSIN
    country:       USA

!

  lname:           RICHARDS
    fname:         E.
    mi:            E.
    inst:          UNIVERSITY OF WISCONSIN
    country:       USA

!

  lname:           PERCIVAL
    fname:         J.
    mi:            W.
    inst:          UNIVERSITY OF WISCONSIN
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        This test checks Mode II target acquisition for tube
    line_2:        POL.  After HST is commanded to place the target in the
    line_3:        finding aperture, a 20 x 20 acquisition area scan is
    line_4:        performed.  The HSP flight software will determine the
    line_5:        target centroid, and center the target in the finding
    line_6:        aperture.  Repeated acquisitions will test the
    line_7:        centering accuracy of the algorithm.  After the
    line_8:        iteration test, the acquisition program will command a
    line_9:        small angle maneuver to place the target in one of five
    line_10:       small photometry apertures.  A high-resolution image is
    line_11:       then performed to check the placement of the target.

!

  question:        3
    section:       2
    line_1:        The apertures to be tested for the POL tube are:
    line_2:        1. POL0-F327M
    line_3:        2. POL90-F216M
    line_4:        3. POL45-F277M
    line_5:        4. POL135-F237M
    line_6:        5. 0.65-F160LP

!

  question:        3
    section:       3
    line_1:        Revision History:
    line_2:        15 Mar 1989, salm: Updated.
    line_3:        09 Aug 1989, salm: Reppert comments of 06 Jun 1989.
    line_4:        24 May 1990, salm: Updated text.
    line_5:        05 Sep 1990, jwp: Major rev, updated for PSF study.
    line_6:        18 Sep 1990, jwp: stanley input of 14 Sep 1990
    line_7:        19 Sep 1990, jwp: scrub to use less time

!

  question:        5
    section:       1
    line_1:        The proposed test will require approximately TBD
    line_2:        minutes to complete per IDT.  For each new offset in
    line_3:        the POL finding aperture, all the iterated acquisitions
    line_4:        or images should be performed without interruption.
    line_5:        Breaks can occur between sets of iterations, or after
    line_6:        images, whenever a new offset is requested.
    line_7:        The OV HSP MSC tests Phases I - III are prerequisites
    line_8:        for this test.
    line_9:        Pointing Stability:  Coarse track is understood to have
    line_10:       less than 19 milliarcsec stability.  That is
    line_11:       satisfactory for all observations in the 10" and 1.0"
    line_12:       IDT apertures.  HSP requires fine lock for all
    line_13:       observations in the 0.4" apertures.

!

  question:        7
    section:       1
    line_1:        The data reduction and analysis consist of examining
    line_2:        the POL images of each aperture position to check the
    line_3:        accuracy of the VFTAV centering algorithm.

!

  question:        8
    section:       1
    line_1:        We anticipate no need for supporting or coordinate
    line_2:        observations with other facilities or additional
    line_3:        special requirements.

!

  question:        10
    section:       1
    line_1:        Data reduction and analysis will be supported on these
    line_2:        computer facilities:
    line_3:        1. MADRAF (UW), VAX 11/780 (VMS), IRAF/STSDAS
    line_4:        2. UWSAL (UW), MicroVAX II (Ultrix), IRAF/STSDAS
    line_5:        3. IDTVAX (STScI), VAX (VMS), IRAF/STSDAS
    line_6:        4. idtsun.stsci.edu (STScI), Sun (Unix), IRAF/STSDAS

!
!end of general form text

general_form_address:

  lname:           BLESS
    fname:         ROBERT
    mi:            C.
    category:      PI
    inst:          UNIVERSITY OF WISCONSIN

!

  lname:           RICHARDS
    fname:         EVAN
    mi:            E.
    category:      CON
    inst:          UNIVERSITY OF WISCONSIN
    addr_1:        SPACE SCIENCE AND ENGINEERING CENTER
    addr_2:        1225 WEST DAYTON STREET
    city:          MADISON
    state:         WI
    zip:           53706
    country:       USA
    phone:         (608)263-6775

!

  lname:           PERCIVAL
    fname:         JEFFREY
    mi:            W.
    category:      CON
    inst:          UNIVERSITY OF WISCONSIN
    addr_1:        SPACE ASTRONOMY LABORATORY
    addr_2:        1150 UNIVERSITY AVE.
    city:          MADISON
    state:         WI
    zip:           53706
    country:       USA
    phone:         (608)262-8686

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        SAO4165
    descr_1:       B3 STAR IN CVZ
    pos_1:         RA=00H 34M 38.135S +/- 0.01S,
    pos_2:         DEC=+72D 37' 12.66" +/- 0.1"
    equinox:       1950
    plate_req:     NO
    fluxnum_1:     1
    fluxval_1:     V=7.1, TYPE=B3

!

    targnum:       2
    name_1:        SAO13012
    descr_1:       B2 STAR IN CVZ
    pos_1:         RA=04H 01M 44.278S +/- 0.01S,
    pos_2:         DEC=61D 58' 0.83" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=6.7,TYPE=B2

!

    targnum:       3
    name_1:        SAO6790
    descr_1:       B3 STAR IN CVZ
    pos_1:         RA=09H 10M 41.849S +/- 0.01S,
    pos_2:         DEC=79D 29' 21.79" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=8.5,TYPE=B3

!

    targnum:       4
    name_1:        SAO16291
    descr_1:       B9 STAR IN CVZ
    pos_1:         RA=13H 08M 29.367S +/- 0.01S,
    pos_2:         DEC=69D 49' 32.25" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=7.4,TYPE=B9

!

    targnum:       5
    name_1:        SAO16956
    descr_1:       ^
    pos_1:         RA=16H 05M 24.973S +/- 0.01S,
    pos_2:         DEC=61D 45' 29.99" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=8.0,TYPE=B9

!

    targnum:       6
    name_1:        SAO9827
    descr_1:       B3 STAR IN CVZ
    pos_1:         RA=20H 38M 01.723S +/- 0.01S,
    pos_2:         DEC=79D 15' 15.00" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=6.8,TYPE=B3

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       100.000
    sequence_1:    DEFINE
    sequence_2:    ACQUIRE
    targname:      SAO4165
    config:        HSP/POL
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    comment_1:     DUMP LOGS AND SCRATCH PAD AFTER ACQ.
    comment_2:     CHOOSE A TARGET IN CVZ.

!

    linenum:       101.000
    sequence_1:    DEFINE
    sequence_2:    ITERATE
    targname:      ^
    config:        HSP/POL
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    comment_1:     DUMP LOGS AND SCRATCH PAD AFTER ACQ.

!

    linenum:       102.000
    sequence_1:    DEFINE
    sequence_2:    BIG-IMAGE
    targname:      ^
    config:        HSP/POL
    opmode:        IMAGE
    aperture:      6.0
    sp_element:    F160LP
    num_exp:       1
    time_per_exp:  9S
    priority:      1
    param_1:       X-SIZE=30,
    param_2:       Y-SIZE=32,
    param_3:       SPACING=0.4,
    param_4:       DATA-FORMAT=WORD,

!

    linenum:       103.000
    sequence_1:    DEFINE
    sequence_2:    SMA-IMAGE
    targname:      ^
    config:        HSP/POL
    opmode:        IMAGE
    aperture:      #
    sp_element:    #
    num_exp:       1
    time_per_exp:  9.6S
    priority:      1
    param_1:       X-SIZE=30,
    param_2:       Y-SIZE=32,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,

!

    linenum:       104.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 105;
    req_2:         GROUP 104-105 NON-INT;
    req_3:         CYCLE 0 / 104-133;
    comment_1:     TUBE POL APER 1 ACQ.

!

    linenum:       105.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      POL0
    sp_element:    F327M
    comment_1:     TUBE POL APER 1 IMAGE.

!

    linenum:       106.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 107;
    req_2:         GROUP 106-109 NON-INT;
    comment_1:     TUBE POL APER 1 ACQ.

!

    linenum:       107.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 108.000;
    comment_1:     TUBE POL APER 1 ITER 1.

!

    linenum:       108.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 109.000;
    comment_1:     TUBE POL APER 1 ITER 2.

!

    linenum:       109.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      POL0
    sp_element:    F327M
    comment_1:     TUBE POL APER 1 IMAGE.

!

    linenum:       110.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 111;
    req_2:         GROUP 110-111 NON-INT;
    comment_1:     TUBE POL APER 2 ACQ.

!

    linenum:       111.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      POL90
    sp_element:    F216M
    comment_1:     TUBE POL APER 2 IMAGE.

!

    linenum:       112.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 113;
    req_2:         GROUP 112-115 NON-INT;
    comment_1:     TUBE POL APER 2 ACQ.

!

    linenum:       113.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 114.000;
    comment_1:     TUBE POL APER 2 ITER 1.

!

    linenum:       114.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 115.000;
    comment_1:     TUBE POL APER 2 ITER 2.

!

    linenum:       115.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      POL90
    sp_element:    F216M
    comment_1:     TUBE POL APER 2 IMAGE.

!

    linenum:       116.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 117;
    req_2:         GROUP 116-117 NON-INT;
    comment_1:     TUBE POL APER 3 ACQ.

!

    linenum:       117.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      POL45
    sp_element:    F277M
    comment_1:     TUBE POL APER 3 IMAGE.

!

    linenum:       118.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 119;
    req_2:         GROUP 118-121 NON-INT;
    comment_1:     TUBE POL APER 3 ACQ.

!

    linenum:       119.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 120.000;
    comment_1:     TUBE POL APER 3 ITER 1.

!

    linenum:       120.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 121.000;
    comment_1:     TUBE POL APER 3 ITER 2.

!

    linenum:       121.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      POL45
    sp_element:    F277M
    comment_1:     TUBE POL APER 3 IMAGE.

!

    linenum:       122.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 123;
    req_2:         GROUP 122-123 NON-INT;
    comment_1:     TUBE POL APER 4 ACQ.

!

    linenum:       123.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      POL135
    sp_element:    F237M
    comment_1:     TUBE POL APER 4 IMAGE.

!

    linenum:       124.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 125;
    req_2:         GROUP 124-127 NON-INT;
    comment_1:     TUBE POL APER 4 ACQ.

!

    linenum:       125.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 126.000;
    comment_1:     TUBE POL APER 4 ITER 1.

!

    linenum:       126.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 127.000;
    comment_1:     TUBE POL APER 4 ITER 2.

!

    linenum:       127.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      POL135
    sp_element:    F237M
    comment_1:     TUBE POL APER 4 IMAGE.

!

    linenum:       128.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 129;
    req_2:         GROUP 128-129 NON-INT;
    comment_1:     TUBE POL APER 5 ACQ.

!

    linenum:       129.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      0.65
    sp_element:    F160LP
    comment_1:     TUBE POL APER 5 IMAGE.

!

    linenum:       130.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 131;
    req_2:         GROUP 130-133 NON-INT;
    comment_1:     TUBE POL APER 5 ACQ.

!

    linenum:       131.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 132.000;
    comment_1:     TUBE POL APER 5 ITER 1.

!

    linenum:       132.000
    sequence_1:    USE
    sequence_2:    ITERATE
    req_1:         ONBOARD ACQ FOR 133.000;
    comment_1:     TUBE POL APER 5 ITER 2.

!

    linenum:       133.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      0.65
    sp_element:    F160LP
    comment_1:     TUBE POL APER 5 IMAGE.

!
! end of exposure logsheet

! No scan data records found