! File: 3063C.PROP ! Database: PEPDB ! Date: 18-FEB-1994:14:00:32 coverpage: title_1: FOS FOCUS OLT proposal_for: SV/OLT pi_fname: GEORGE pi_lname: HARTIG pi_inst: STSCI pi_country: USA pi_phone: 301-338-4966 num_pri: 1 fos: Y ! end of coverpage abstract: line_1: Verify that the best focus position of the secondary as line_2: derived from the cameras is appropriate for the FOS. We line_3: will measure the throughput for 4 apertures using two line_4: gratings. ! ! end of abstract general_form_proposers: lname: HARTIG fname: GEORGE inst: STSCI country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: See abstract. ! question: 3 section: 1 line_1: This test requires the placement of the secondary mirror line_2: at 5 positions (plus the original). At each position, line_3: an interactive FOS target acquisition (which could be line_4: an onboard if the peak-up mode is verified) will line_5: be performed. Observations will then be obtained in line_6: the 0.3, 0.5, 1.0, and 4.3 arcsec apertures using gratings line_7: G190H and G570H. ! question: 5 section: 1 line_1: An interactive acquisition will be needed at each mirror line_2: position if the onboard acquisition software has not been line_3: validated when this proposal is run. ! question: 7 section: 1 line_1: Data reduction will be performed by the FOS IDT. ! !end of general form text general_form_address: lname: HARTIG fname: GEORGE category: PI inst: STSCI ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: GRW+70D5824 name_2: (GSC4405-1633) descr_1: BRIGHT UV STANDARD pos_1: RA =13H 38M 51.77S +/- 0.2S, pos_2: DEC= +70D 17' 08.5" +/- 1.0", pos_3: PLATE-ID=0001 equinox: 2000 comment_1: PRIME TARGET, GUIDE STAR comment_2: COORDINATES GIVEN fluxnum_1: 1 fluxval_1: V = 12.87 +/- 0.2 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: FOSINT targname: GRW+70D5824 config: FOS/RD opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 12.8S fluxnum_1: 1 priority: 1 req_1: INT ACQ FOR 1.1-4; comment_1: OVERLIGHT LIMIT MUST BE SET comment_2: TO 30 MILLION FOR THIS comment_3: OBSERVATIONS. ! linenum: 1.100 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 256S fluxnum_1: 1 priority: 1 req_1: SEQ 1.1-4.5 NO GAP; comment_1: OVERLIGHT LIMIT MUST BE SET comment_2: TO 30 MILLION FOR THIS comment_3: OBSERVATIONS. ! linenum: 1.150 sequence_1: ^ targname: TALED config: ^ opmode: ^ aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: 64S fluxnum_1: 1 priority: 1 ! linenum: 1.200 sequence_1: ^ targname: GRW+70D5824 config: ^ opmode: ACCUM aperture: 4.3 sp_element: G190H num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 1.300 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G570H num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 1.400 sequence_1: ^ targname: ^ config: ^ opmode: ACCUM aperture: 0.5 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 1.500 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 1.600 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 1.0 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 2.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 3.000 sequence_1: DEFINE sequence_2: FOSINT targname: GRW+70D5824 config: FOS/RD opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 4.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ/PEAK aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: 10S fluxnum_1: 1 priority: 1 param_1: SCAN-STEP=0.05, param_2: SEARCH-SIZE=7 req_1: ONBOARD ACQ FOR 4.5 ! linenum: 4.500 sequence_1: ^ targname: ^ config: ^ opmode: ACCUM aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 10.000 sequence_1: DEFINE sequence_2: FOSONB targname: GRW+70D5824 config: FOS/RD opmode: ACQ/PEAK aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 2S fluxnum_1: 1 priority: 1 param_1: SCAN-STEP=0.8, param_2: SEARCH-SIZE=6 req_1: ONBOARD ACQ FOR 11; ! linenum: 11.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: SCAN-STEP=0.2, param_2: SEARCH-SIZE=5 req_1: ONBOARD ACQ FOR 12; ! linenum: 12.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 10S fluxnum_1: 1 priority: 1 param_1: SCAN-STEP=0.05, param_2: SEARCH-SIZE=5 req_1: ONBOARD ACQ FOR 13-21; ! linenum: 13.000 sequence_1: ^ targname: ^ config: ^ opmode: ACCUM aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 req_1: SEQ 13-21 NO GAP; ! linenum: 14.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 0.5 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 15.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 1.0 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 16.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 17.000 sequence_1: DEFINE sequence_2: FOSONB targname: GRW+70D5824 config: FOS/RD opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 256S fluxnum_1: 1 priority: 1 comment_1: OVERLIGHT LIMIT MUST BE SET comment_2: TO 30 MILLION FOR THIS comment_3: OBSERVATIONS. ! linenum: 17.100 sequence_1: ^ targname: TALED config: ^ opmode: ^ aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: 64S fluxnum_1: 1 priority: 1 comment_1: OVERLIGHT LIMIT MUST BE SET comment_2: TO 30 MILLION FOR THIS comment_3: OBSERVATIONS. ! linenum: 18.000 sequence_1: ^ targname: GRW+70D5824 config: ^ opmode: ACCUM aperture: 0.3 sp_element: G570H num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 19.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 0.5 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 20.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 1.0 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 21.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 ! linenum: 23.000 sequence_1: DEF SMADJ targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 23M priority: 1 req_1: REQ UPLINK; ! linenum: 100.000 sequence_1: USE sequence_2: FOSINT req_1: GROUP 100-105.5 WITHIN 72H; req_2: SELECT 1 OF 100-105.5 OR req_3: 200-205; req_4: COND IF ONBOARD TA NOT req_5: AVAILABLE/ 100-105.5; req_6: GROUP 100-102.4 NO GAP; comment_1: SECONDARY MIRROR POSITION AT NOMINAL comment_2: CAMERA FOCUS VALUE. ! linenum: 100.500 sequence_1: USE sequence_2: SMADJ req_1: SEQ 100.5-101 NO GAP; comment_1: SECONDARY MIRROR POSITION AT -30 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 101.000 sequence_1: USE sequence_2: FOSINT req_1: CYCLE 0/ 100-205; ! linenum: 101.500 sequence_1: USE sequence_2: SMADJ req_1: SEQ 101.5-102.4 NO GAP; comment_1: SECONDARY MIRROR POSITION AT -10 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 102.000 sequence_1: USE sequence_2: FOSINT ! linenum: 102.400 sequence_1: USE sequence_2: SMADJ comment_1: PUT SECONDARY MIRROR BACK TO NOMINAL comment_2: POSITION. ! linenum: 102.500 sequence_1: USE sequence_2: SMADJ req_1: SEQ 102.5-103 NO GAP; comment_1: SECONDARY MIRROR POSITION AT +10 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 103.000 sequence_1: USE sequence_2: FOSINT req_1: GROUP 102.5-105.5 NO GAP; ! linenum: 103.500 sequence_1: USE sequence_2: SMADJ req_1: SEQ 103.5-104 NO GAP; comment_1: SECONDARY MIRROR POSITION AT +30 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 104.000 sequence_1: USE sequence_2: FOSINT ! linenum: 104.500 sequence_1: USE sequence_2: SMADJ req_1: SEQ 104.5-105.5 NO GAP; comment_1: SECONDARY MIRROR POSITION AT +50 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 105.000 sequence_1: USE sequence_2: FOSINT comment_1: SECONDARY MIRROR POSITION AT +50 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 105.500 sequence_1: USE sequence_2: SMADJ comment_1: PUT SECONDARY MIRROR BACK TO NOMINAL comment_2: POSITION. ! linenum: 200.000 sequence_1: USE sequence_2: FOSONB req_1: GROUP 200-205 WITHIN 72H; req_2: COND IF ONBOARD TA req_3: AVAILABLE; comment_1: SECONDARY MIRROR POSITION AT comment_2: CAMERA FOCUS VALUE. ! linenum: 201.000 sequence_1: USE sequence_2: FOSONB req_1: COND IF ONBOARD TA req_2: AVAILABLE; comment_1: SECONDARY MIRROR POSITION AT -30 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 202.000 sequence_1: USE sequence_2: FOSONB req_1: COND IF ONBOARD TA req_2: AVAILABLE; comment_1: SECONDARY MIRROR POSITION AT -10 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 203.000 sequence_1: USE sequence_2: FOSONB req_1: COND IF ONBOARD TA req_2: AVAILABLE; comment_1: SECONDARY MIRROR POSITION AT +10 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 204.000 sequence_1: USE sequence_2: FOSONB req_1: COND IF ONBOARD TA req_2: AVAILABLE; comment_1: SECONDARY MIRROR POSITION AT +30 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! linenum: 205.000 sequence_1: USE sequence_2: FOSONB req_1: COND IF ONBOARD TA req_2: AVAILABLE; comment_1: SECONDARY MIRROR POSITION AT +50 comment_2: MICRONS FROM CAMERA FOCUS VALUE. ! ! end of exposure logsheet ! No scan data records found