!  File:  2913C.PROP
!  Database:  PEPDB
!  Date:  17-FEB-1994:21:23:14

coverpage:

  title_1:         WF/PC CYCLE 1 CALIBRATION: UV PREP I
    proposal_for:  CAL/WFC
    pi_title:      DR.
    pi_fname:      JOHN
    pi_mi:         W.
    pi_lname:      MACKENTY
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (301) 338-4559
! end of coverpage

abstract:

    line_1:        This calibration warms the optical bench and
    line_2:        CCDs of the WF/PC and drives off possible contamination.
    line_3:        A UV calibration will be preformed to determine the
    line_4:        quantum efficency of the detectors. This test should
    line_5:        be coupled to each science observation that plans to do
    line_6:        photometric measurements with filters F122M, F157W,
    line_7:        F194W, or G200L (in the UV).
    line_9:        The UV sequence should look like:
    line_10:       UV PREP I ... Science Observations ... UV PREP II

!
! end of abstract

general_form_proposers:

  lname:           MACKENTY
    fname:         JOHN
    mi:            W.
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       0
    line_1:        This calibration sequence establishes a WF/PC system
    line_2:        baseline and monitors the camera performance in the UV
    line_3:        at the beginning and at the end of the test. This should
    line_4:        drive the UV contaminates from the CCDs. The SV minimum
    line_5:        plan calibrations are used to tie the UV spectra to the
    line_6:        individual filters.

!

  question:        3
    section:       0
    line_1:        A WF system baseline is established through a multi-step
    line_2:        sequence: 1) UV baseline calibration; 2) Turning TEC pwr
    line_3:        off (for WF & PC); 3) CCD heaters are turned on; 4) Wait
    line_4:        for eight hours
    line_5:        set for a temperature of -82 degrees C.
    line_9:        If the TEC's will remain off (Day 22):
    line_10:       - CJ temps must be < -40 C to continue
    line_11:       If the TEC's will be turned on (Day 46):
    line_12:       - HJ teps must be < -20 C before turning TEC's on
    line_13:       - CJ temps must be < -80 C to continue (after TEC turn-on)
    line_14:       - Repeat UV Calibration measurements after detectors
    line_15:       reach -80 C and again after the UV observation.

!

  question:        5
    section:       0
    line_1:        Real-time contact is not required.
    line_3:        SI C&DH operational format AN.

!
!end of general form text

general_form_address:

  lname:           MACKENTY
    fname:         JOHN
    mi:            W
    title:         DR.
    category:      PI
    inst:          ST SCI

!

  lname:           MACKENTY
    fname:         JOHN
    mi:            W.
    inst:          STSCI
    country:       USA
    phone:         (301) 338-4559

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        A+81266
    descr_1:       UV SPECTROPHOTOMETRIC STANDARD
    pos_1:         RA= 09H21M29S +/-1S,
    pos_2:         DEC= 81D43'00" +/-10",
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V=12.1 +/-0.5

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       10.000
    sequence_1:    USE
    sequence_2:    UVBASELINE
    req_1:         SEQ 10-30 NO GAP;
    req_2:         CYCLE 1/10-180;

!

    linenum:       20.000
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  8H
    priority:      1
    param_1:       CONTROL=GYRO,
    comment_1:     TECS OFF. M1 MIRROR HEATER ON. CCD
    comment_2:     HEATERS ON. (SI=LTDECON,
    comment_3:     PYRAMID=HOLD)

!

    linenum:       30.000
    sequence_1:    USE
    sequence_2:    UVBASELINE

!

    linenum:       110.000
    sequence_1:    DEFINE
    sequence_2:    UVBASELINE
    targname:      A+81266
    config:        WFC
    opmode:        IMAGE
    aperture:      W1
    sp_element:    G200L
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    req_1:         SEQ 110-180 NO GAP;
    req_2:         SEQ 110-140 NON-INT;
    comment_1:     ONLY READOUT 1 CCD.

!

    linenum:       120.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      W2
    sp_element:    ^
    num_exp:       ^
    time_per_exp:  ^
    priority:      ^
    comment_1:     ONLY READOUT 1 CCD.

!

    linenum:       130.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      W3
    sp_element:    ^
    num_exp:       ^
    time_per_exp:  ^
    priority:      ^
    comment_1:     ONLY READOUT 1 CCD.

!

    linenum:       140.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      W4
    sp_element:    ^
    num_exp:       ^
    time_per_exp:  ^
    priority:      ^
    comment_1:     ONLY READOUT 1 CCD.

!

    linenum:       150.000
    sequence_1:    ^
    targname:      ^
    config:        PC
    opmode:        ^
    aperture:      P5
    sp_element:    ^
    num_exp:       ^
    time_per_exp:  25S
    priority:      ^
    req_1:         SEQ 150-180 NON-INT;
    comment_1:     ONLY READOUT 1 CCD.

!

    linenum:       160.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      P6
    sp_element:    ^
    num_exp:       ^
    time_per_exp:  ^
    priority:      ^
    comment_1:     ONLY READOUT 1 CCD.

!

    linenum:       170.000
    sequence_1:    DEFINE
    sequence_2:    UVBASELINE
    targname:      A+81266
    config:        PC
    opmode:        IMAGE
    aperture:      P7
    sp_element:    G200L
    num_exp:       1
    time_per_exp:  25S
    priority:      1
    comment_1:     ONLY READOUT 1 CCD.

!

    linenum:       180.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      P8
    sp_element:    ^
    num_exp:       ^
    time_per_exp:  ^
    priority:      ^
    comment_1:     ONLY READOUT 1 CCD.

!
! end of exposure logsheet

! No scan data records found