!  File:  2848C.PROP
!  Database:  PEPDB
!  Date:  17-FEB-1994:18:26:13

coverpage:

  title_1:         GHRS LOW AND INTERMEDIATE RESOLUTION GRATING
    title_2:       ABSOLUTE PHOTOMETRIC CALIBRATION
    sci_cat:       CALIBRATION
    proposal_for:  CAL/HRS
    pi_fname:      DOUGLAS
    pi_mi:         K.
    pi_lname:      DUNCAN
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      301-338-4935
    hours_pri:     7.88
    num_pri:       1
    hrs:           Y
! end of coverpage

abstract:

    line_1:        This proposal defines a test to evaluate the HRS low
    line_2:        and intermediate resolution gratings for absolute sensitivity.
    line_3:        Measurements in the large and small aperture will be evaluated.
    line_5:        Revised 11/6/89 by PStanley to reduce G200M observations per Duncan's
    line_6:        request.

!
! end of abstract

general_form_proposers:

  lname:           DUNCAN
    fname:         DOUGLAS
    mi:            K.
    inst:          STSCI
    country:       USA

!

  lname:           GILLILAND
    fname:         RONALD
    mi:            L.
    inst:          STSCI
    country:       USA

!

  lname:           LALLO
    fname:         MATTHEW
    mi:            D.
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        Description of proposed observations:
    line_2:        Observe Mu Col (HD38666) or HD 93521 as follows:
    line_3:        1. Acquire target using on-board acquisition.
    line_4:        2. Center in LSA and make focus diode aperture map.
    line_5:        3. Obtain G140L spectra as follows:
    line_6:        8 carrousel settings from 1100-1800A; step-patt=10
    line_7:        4. Obtain G140M spectra as follows:
    line_8:        7 carrousel settings from 1100-1700A; step-patt=4
    line_9:        5. Obtain G160M spectra as follows:
    line_10:       9 carrousel settings from 1200-2000A; step-patt=4
    line_11:       6. Obtain G200M spectra as follows:
    line_12:       9 carrousel settings from 1600-2400A; step-patt=4
    line_13:       7. Obtain G270M spectra as follows:
    line_14:       11 carrousel settings from 2200-3200A; step-patt=4
    line_21:       9. Make ST SAM followed by target acquisition peak up to center
    line_22:       target in small aperture.
    line_23:       10. Repeat steps 3 through 7.

!

  question:        7
    section:       1
    line_1:        Data will be reduced at using STSDAS (of course).
    line_2:        The data will be used to obtain the following:
    line_3:        1. absolute and relative sensitivity for the G140M, G160M,
    line_4:        G200M, G270M modes (and their stability).
    line_5:        2. small aperture light loss for each intermediate resolution mode

!
!end of general form text

general_form_address:

  lname:           DUNCAN
    fname:         DOUGLAS
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DR.
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         301-338-4935

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        MU-COL
    name_2:        HD38666
    descr_1:       PHOTOMETRIC STANDARD
    pos_1:         RA=5H 45M 59.92S +/-0.01S,
    pos_2:         DEC=-32D 18' 23.4" +/-0.16"
    equinox:       2000
    pm_or_par:     Y
    pos_epoch_yr:  1950.00
    ra_pm_val:     0.000300
    ra_pm_unct:    0.000267
    dec_pm_val:    -0.0250
    dec_pm_unct:   0.0030
    fluxnum_1:     1
    fluxval_1:     V=5.17,TYPE=O9.5V
    fluxnum_2:     2
    fluxval_2:     B-V=-0.28

!

    targnum:       2
    name_1:        HD93521
    descr_1:       PHOTOMETRIC STANDARD
    pos_1:         RA=10H 48M 23.51S +/-0.05S,
    pos_2:         DEC=37D 34' 12.8" +/-0.3"
    equinox:       2000
    pm_or_par:     N
    fluxnum_1:     1
    fluxval_1:     V=7.04,TYPE=O9VP
    fluxnum_2:     2
    fluxval_2:     B-V=-0.28,E(B-V)=0.03

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    targname:      MU-COL
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  57.8S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_3:       BRIGHT=25000,
    param_4:       FAINT=200
    req_1:         ONBOARD ACQ FOR 2.000-7.000
    comment_1:     CENTER IN LARGE APERTURE AND
    comment_2:     OBTAIN APERTURE IMAGE WITH
    comment_3:     FOCUS DIODE. STEP-TIME=1.0

!

    linenum:       2.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G140L
    wavelength:    1100-1800
    num_exp:       1
    time_per_exp:  25.6S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=10,
    param_7:       HIGH-COUNT=60000
    req_1:         GROUP 2-6 WITHIN 3D;
    comment_1:     IN 2 WE ARE REQUESTING 8 CARROUSEL
    comment_2:     SETTINGS ON 100A CENTERS, WITH LAMBDA
    comment_3:     CENTER=1100,1200,...,1800A. INTEGRATE
    comment_4:     VIA EXPOSURE METER CONTROL FOR
    comment_5:     FOR 30000 CTS/SUBSTEP FOR A MAXIMUM
    comment_6:     INTEGRATION TIME OF 0.8S/SUBSTEP.

!

    linenum:       3.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G140M
    wavelength:    1100-1700
    num_exp:       1
    time_per_exp:  302.4S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     7 SETTINGS ON 100A CENTERS:1100
    comment_2:     1200,...,1700A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 19.2 SEC
    comment_4:     PER SUBSTEP. EXPECT 1500 CTS/SEC
    comment_5:     AT 1500A. MAXIMUM=8 COMPLETE
    comment_6:     PATTERNS.

!

    linenum:       4.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G160M
    wavelength:    1200-2000
    num_exp:       1
    time_per_exp:  259.2S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     9 SETTINGS ON 100A CENTERS:1200
    comment_2:     1300,...,2000A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 12.8 SEC
    comment_4:     PER SUBSTEP.

!

    linenum:       5.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G200M
    wavelength:    1600-2000
    num_exp:       1
    time_per_exp:  259.2S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=400,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     2 SETTINGS ON 400A CENTERS:1600 AND
    comment_2:     2000A. INTEGRATE FOR
    comment_3:     30000 CTS PER SUBSTEP OR MAX OF 12.8
    comment_4:     SEC PER SUBSTEP.

!

    linenum:       6.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G270M
    wavelength:    2200-3200
    num_exp:       1
    time_per_exp:  316.8S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     11 SETTINGS ON 100A CENTERS:2200
    comment_2:     2300,...,3200A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 12.8 SEC
    comment_4:     PER SUBSTEP.

!

    linenum:       7.000
    targname:      MU-COL
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  5M
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 8.000-12.000

!

    linenum:       8.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G140L
    wavelength:    1100-1800
    num_exp:       1
    time_per_exp:  25.6S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=10,
    param_7:       HIGH-COUNT=60000
    req_1:         GROUP 8-12 WITHIN 3D;
    comment_1:     IN 8 WE ARE REQUESTING 8 CARROUSEL
    comment_2:     SETTINGS ON 100A CENTERS, WITH LAMBDA
    comment_3:     CENTER=1100,1200,...,1800A. INTEGRATE
    comment_4:     VIA EXPOSURE METER CONTROL FOR
    comment_5:     FOR 30000 CTS/SUBSTEP FOR A MAXIMUM
    comment_6:     INTEGRATION TIME OF 0.8S/SUBSTEP.

!

    linenum:       9.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G140M
    wavelength:    1100-1700
    num_exp:       1
    time_per_exp:  302.4S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     7 SETTINGS ON 100A CENTERS:1100
    comment_2:     1120,...,1700A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 19.2 SEC
    comment_4:     PER SUBSTEP. EXPECT 1500 CTS/SEC
    comment_5:     AT 1500A. MAXIMUM=8 COMPLETE
    comment_6:     PATTERNS.

!

    linenum:       10.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G160M
    wavelength:    1200-2000
    num_exp:       1
    time_per_exp:  259.2S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     9 SETTINGS ON 100A CENTERS:1200
    comment_2:     1300,...,2000A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 12.8 SEC
    comment_4:     PER SUBSTEP.

!

    linenum:       11.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G200M
    wavelength:    1600-2000
    num_exp:       1
    time_per_exp:  259.2S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=400,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     2 SETTINGS ON 400A CENTERS:1600 AND
    comment_2:     2000A. INTEGRATE FOR
    comment_3:     30000 CTS PER SUBSTEP OR MAX OF 12.8
    comment_4:     SEC PER SUBSTEP.

!

    linenum:       12.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G270M
    wavelength:    2200-3200
    num_exp:       1
    time_per_exp:  316.8S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     11 SETTINGS ON 100A CENTERS:2200
    comment_2:     2300,...,3200A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 12.8 SEC
    comment_4:     PER SUBSTEP.

!

    linenum:       13.000
    targname:      HD93521
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  4.8M
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_3:       BRIGHT=5000,
    param_4:       FAINT=200
    req_1:         ONBOARD ACQ FOR 14.000-19.000
    comment_1:     CENTER IN LARGE APERTURE AND
    comment_2:     OBTAIN APERTURE IMAGE WITH
    comment_3:     FOCUS DIODE. STEP-TIME=1.0

!

    linenum:       14.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G140L
    wavelength:    1100-1800
    num_exp:       1
    time_per_exp:  25.6S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=10,
    param_7:       HIGH-COUNT=60000
    req_1:         GROUP 2-6 WITHIN 3D;
    comment_1:     IN 2 WE ARE REQUESTING 8 CARROUSEL
    comment_2:     SETTINGS ON 100A CENTERS, WITH LAMBDA
    comment_3:     CENTER=1100,1200,...,1800A. INTEGRATE
    comment_4:     VIA EXPOSURE METER CONTROL FOR
    comment_5:     FOR 30000 CTS/SUBSTEP FOR A MAXIMUM
    comment_6:     INTEGRATION TIME OF 0.8S/SUBSTEP.

!

    linenum:       15.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G140M
    wavelength:    1100-1700
    num_exp:       1
    time_per_exp:  302.4S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     7 SETTINGS ON 100A CENTERS:1100
    comment_2:     1200,...,1700A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 19.2 SEC
    comment_4:     PER SUBSTEP. EXPECT 1500 CTS/SEC
    comment_5:     AT 1500A. MAXIMUM=8 COMPLETE
    comment_6:     PATTERNS.

!

    linenum:       16.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G160M
    wavelength:    1200-2000
    num_exp:       1
    time_per_exp:  259.2S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     9 SETTINGS ON 100A CENTERS:1200
    comment_2:     1300,...,2000A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 12.8 SEC
    comment_4:     PER SUBSTEP.

!

    linenum:       17.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G200M
    wavelength:    1600-2000
    num_exp:       1
    time_per_exp:  259.2S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=400,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     2 SETTINGS ON 400A CENTERS:1600 AND
    comment_2:     2000A. INTEGRATE FOR
    comment_3:     30000 CTS PER SUBSTEP OR MAX OF 12.8
    comment_4:     SEC PER SUBSTEP.

!

    linenum:       18.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G270M
    wavelength:    2200-3200
    num_exp:       1
    time_per_exp:  316.8S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     11 SETTINGS ON 100A CENTERS:2200
    comment_2:     2300,...,3200A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 12.8 SEC
    comment_4:     PER SUBSTEP.

!

    linenum:       19.000
    targname:      HD93521
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  5M
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 20.000-24.000

!

    linenum:       20.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G140L
    wavelength:    1100-1800
    num_exp:       1
    time_per_exp:  25.6S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=10,
    param_7:       HIGH-COUNT=60000
    req_1:         GROUP 8-12 WITHIN 3D;
    comment_1:     IN 8 WE ARE REQUESTING 8 CARROUSEL
    comment_2:     SETTINGS ON 100A CENTERS, WITH LAMBDA
    comment_3:     CENTER=1100,1200,...,1800A. INTEGRATE
    comment_4:     VIA EXPOSURE METER CONTROL FOR
    comment_5:     FOR 30000 CTS/SUBSTEP FOR A MAXIMUM
    comment_6:     INTEGRATION TIME OF 0.8S/SUBSTEP.

!

    linenum:       21.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G140M
    wavelength:    1100-1700
    num_exp:       1
    time_per_exp:  302.4S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     7 SETTINGS ON 100A CENTERS:1100
    comment_2:     1120,...,1700A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 19.2 SEC
    comment_4:     PER SUBSTEP. EXPECT 1500 CTS/SEC
    comment_5:     AT 1500A. MAXIMUM=8 COMPLETE
    comment_6:     PATTERNS.

!

    linenum:       22.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G160M
    wavelength:    1200-2000
    num_exp:       1
    time_per_exp:  259.2S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     9 SETTINGS ON 100A CENTERS:1200
    comment_2:     1300,...,2000A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 12.8 SEC
    comment_4:     PER SUBSTEP.

!

    linenum:       23.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G200M
    wavelength:    1600-2000
    num_exp:       1
    time_per_exp:  259.2S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=400,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     2 SETTINGS ON 400A CENTERS:1600 AND
    comment_2:     2000A. INTEGRATE FOR
    comment_3:     30000 CTS PER SUBSTEP OR MAX OF 12.8
    comment_4:     SEC PER SUBSTEP.

!

    linenum:       24.000
    targname:      HD93521
    config:        HRS
    opmode:        WSCAN
    aperture:      0.25
    sp_element:    G270M
    wavelength:    2200-3200
    num_exp:       1
    time_per_exp:  316.8S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=60000
    comment_1:     11 SETTINGS ON 100A CENTERS:2200
    comment_2:     2300,...,3200A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 12.8 SEC
    comment_4:     PER SUBSTEP.

!
! end of exposure logsheet

! No scan data records found