! File: 2823C.PROP ! Database: PEPDB ! Date: 17-FEB-1994:16:07:33 coverpage: title_1: ABSOLUTE PHOTOMETRY proposal_for: CAL/FOS pi_fname: GEORGE pi_lname: HARTIG pi_inst: STSCI pi_country: USA pi_phone: 301-338-4966 hours_pri: 13.20 num_pri: 3 fos: Y ! end of coverpage abstract: line_1: The absolute sensitivity of the FOS will be determined in SV by line_2: observing 2 stars at 3 epochs, first in 3 apertures (1.0", line_3: 0.5", and 0.3" circular) and then in 1 aperture (1.0" circular). line_4: In cycle 1, one star, BD+28D4211 will be observed in the 1.0" line_5: aperture to establish the stability of the sensitivity and flat line_6: field characteristics and improve the accuracy obtained in SV. line_7: This star will also be observed through the paired apertures line_8: since these are not calibrated in SV. The stars will be observed line_10: in most detector/grating combinations. The line_11: data will be averaged to form the inverse sensitivity functions line_12: required by RSDP. ! ! end of abstract general_form_proposers: lname: HARTIG fname: GEORGE inst: STSCI country: USA ! lname: KINNEY fname: ANNE inst: STSCI country: USA ! lname: BHATTACHARYA fname: BIDUSHI inst: STSCI country: USA ! lname: FORD fname: HOLLAND inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! lname: BOHLIN fname: RALPH title: P.I. inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: In this test, we will obtain spectra of BD+28D4211, a line_2: spectrophotometric standard with smooth spectral distribution. line_3: Observations will be made with all of line_4: the most utilized detector-grating combinations. line_5: To assure registration of the spectrum on the diode array, line_6: the stars will be observed at 3 y-bases with ~8 micron line_7: separation. line_8: This star will be observed with all of the paired line_9: apertures, along with the 1.0" single aperture. line_10: Measurements will also be made with the most useful line_11: polarizer configurations, to provide photometric and line_12: flat-field calibrations. The light leakage from a line_13: point source behind the occulting apertures will also line_14: be quantified. ! question: 5 section: 1 line_1: Pointing stability of 10% of the smallest aperture used line_2: (0.25") - 0.025" - is required. ! question: 6 section: 1 line_1: This test is stray light sensitive. line_2: It is imperative that this program be scheduled as early as line_3: possible in Cycle 1, to support RSDP calibration of FOS line_4: data, especially those obtained with the paired apertures. ! question: 7 section: 1 line_1: Data reduction and analysis will be performed at the STScI. line_2: This is a calibration; the resulting data will be used by line_3: the PODPS pipeline. Inverse sensitivity and spectral flat line_4: field files in CDBS will be updated. ! !end of general form text general_form_address: lname: HARTIG fname: GEORGE category: PI inst: STSCI addr_1: HOMEWOOD CAMPUS city: BALTIMORE state: MD zip: 21218 country: USA phone: 301-338-4966 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: BD+28D4211 name_2: GSC 2214-1198 descr_1: SUBDWARF O PHOTOMETRIC STANDARD. pos_1: RA = 21H 51M 11.1S +/- 0.01S, pos_2: DEC = +28D 51' 51.8" +/- 0.2" equinox: 2000 comment_1: THE GSC NAME IS GIVEN. fluxnum_1: 1 fluxval_1: V = 10.53 +/- 0.05 fluxnum_2: 2 fluxval_2: B = 10.19 +/- 0.05 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: BD28-RED targname: WAVE config: FOS/RD opmode: ACCUM aperture: # sp_element: G270H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 2.0 NO SLEW; req_2: CYCLE 1 / 1.0 - 115.0; req_3: SEQ 1-8; ! linenum: 2.000 sequence_1: ^ targname: # config: ^ opmode: IMAGE aperture: # sp_element: ^ num_exp: 1 time_per_exp: 36S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 3.000 sequence_1: ^ targname: # config: ^ opmode: IMAGE aperture: # sp_element: G190H num_exp: 1 time_per_exp: 70S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 4.000 sequence_1: ^ targname: WAVE config: ^ opmode: ACCUM aperture: # sp_element: ^ num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 3 NO SLEW; ! linenum: 5.000 sequence_1: ^ targname: WAVE config: ^ opmode: ACCUM aperture: # sp_element: G570H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 6 NO SLEW; comment_1: USE THE CROSS-STRAPPED LAMP. ! linenum: 6.000 sequence_1: ^ targname: # config: ^ opmode: IMAGE aperture: # sp_element: ^ num_exp: 1 time_per_exp: 340S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 7.000 sequence_1: ^ targname: # config: ^ opmode: IMAGE aperture: # sp_element: G400H num_exp: 1 time_per_exp: 75S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 8.000 sequence_1: ^ targname: WAVE config: ^ opmode: ACCUM aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 7 NO SLEW; comment_1: END DEFINE BD28-RED ! linenum: 9.000 sequence_1: DEFINE sequence_2: BD28-BLUE targname: # config: FOS/BL opmode: IMAGE aperture: # sp_element: G130H num_exp: 1 time_per_exp: 300S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF req_1: SEQ 9-16; ! linenum: 10.000 sequence_1: DEFINE sequence_2: BD28-BLUE targname: WAVE config: FOS/BL opmode: ACCUM aperture: # sp_element: G130H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 9 NO SLEW; ! linenum: 11.000 sequence_1: ^ targname: WAVE config: ^ opmode: ACCUM aperture: # sp_element: G400H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 12 NO SLEW; ! linenum: 12.000 sequence_1: ^ targname: # config: ^ opmode: IMAGE aperture: # sp_element: ^ num_exp: 1 time_per_exp: 360S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 13.000 sequence_1: ^ targname: # config: ^ opmode: IMAGE aperture: # sp_element: G270H num_exp: 1 time_per_exp: 50S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 14.000 sequence_1: ^ targname: WAVE config: ^ opmode: ACCUM aperture: # sp_element: ^ num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 13 NO SLEW; ! linenum: 15.000 sequence_1: ^ targname: WAVE config: ^ opmode: ACCUM aperture: # sp_element: G190H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 16 NO SLEW; ! linenum: 16.000 sequence_1: ^ targname: # config: ^ opmode: IMAGE aperture: # sp_element: ^ num_exp: 1 time_per_exp: 65S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF comment_1: END DEFINE BD28-BLUE ! linenum: 17.000 targname: BD+28D4211 config: FOS/RD opmode: ACQ/PEAK aperture: 1.0 sp_element: G780H num_exp: 1 time_per_exp: 0.3S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=6, param_2: SCAN-STEP=0.7 req_1: ONBOARD ACQ FOR 18; comment_1: BEGIN FOS RED SIDE CALIBRATION; comment_2: THIS SEQ. SHOULD BE SCHEDULED AS comment_3: SOON AS POSSIBLE IN CYCLE1. ! linenum: 18.000 targname: ^ config: ^ opmode: ^ aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: 1.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.2 req_1: ONBOARD ACQ FOR 18.5; ! linenum: 18.500 targname: ^ config: ^ opmode: ^ aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: 10.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.06 req_1: ONBOARD ACQ FOR 21.1-28,33; req_2: SEQ 17-37; ! linenum: 21.100 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 21.2 NO SLEW; ! linenum: 21.200 targname: BD+28D4211 config: ^ opmode: IMAGE aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 75S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 21.300 targname: BD+28D4211 config: ^ opmode: IMAGE aperture: 4.3 sp_element: G190H num_exp: 1 time_per_exp: 150S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 21.500 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 21.3 NO SLEW; ! linenum: 21.600 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: G570H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 21.61 NO SLEW; comment_1: USE THE CROSS-STRAPPED LAMP. ! linenum: 21.610 targname: BD+28D4211 config: ^ opmode: IMAGE aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 950S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 21.700 targname: BD+28D4211 config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: G400H num_exp: 1 time_per_exp: 200S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 21.800 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 21.7 NO SLEW; ! linenum: 22.000 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G160L num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 23 NO SLEW; comment_1: USE THE CROSS-STRAPPED LAMP. ! linenum: 23.000 targname: BD+28D4211 config: ^ opmode: IMAGE aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 50S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 24.000 targname: BD+28D4211 config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: G650L num_exp: 1 time_per_exp: 480S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 25.000 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 24 NO SLEW; comment_1: USE THE CROSS-STRAPPED LAMP. ! linenum: 26.000 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: PRISM num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 27 NO SLEW; comment_1: USE THE CROSS-STRAPPED LAMP. ! linenum: 27.000 targname: BD+28D4211 config: ^ opmode: IMAGE aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 50S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 28.000 targname: BD+28D4211 config: FOS/RD opmode: ACQ/PEAK aperture: 0.25-PAIR-B sp_element: G780H num_exp: 1 time_per_exp: 10.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.05 req_1: ONBOARD ACQ FOR 30-32; ! linenum: 30.000 sequence_1: USE sequence_2: BD28-RED targname: BD+28D4211 aperture: 0.25-PAIR-B time_per_exp: X3.0 ! linenum: 31.000 sequence_1: USE sequence_2: BD28-RED targname: BD+28D4211 aperture: 0.5-PAIR-B time_per_exp: X1.6 ! linenum: 32.000 sequence_1: USE sequence_2: BD28-RED targname: BD+28D4211 aperture: 1.0-PAIR-B ! linenum: 33.000 targname: BD+28D4211 config: FOS/RD opmode: ACQ/PEAK aperture: 0.25-PAIR-A sp_element: G780H num_exp: 1 time_per_exp: 10.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.05 req_1: ONBOARD ACQ FOR 35-37; ! linenum: 35.000 sequence_1: USE sequence_2: BD28-RED targname: BD+28D4211 aperture: 0.25-PAIR-A time_per_exp: X3.0 ! linenum: 36.000 sequence_1: USE sequence_2: BD28-RED targname: BD+28D4211 aperture: 0.5-PAIR-A time_per_exp: X1.6 ! linenum: 37.000 sequence_1: USE sequence_2: BD28-RED targname: BD+28D4211 aperture: 1.0-PAIR-A ! linenum: 100.000 targname: BD+28D4211 config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G130H num_exp: 1 time_per_exp: 1.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.2 req_1: ONBOARD ACQ FOR 100.5; comment_1: BEGIN BLUE SIDE OF FOS CALIBRATION ! linenum: 100.500 targname: BD+28D4211 config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G130H num_exp: 1 time_per_exp: 1.5S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.06 req_1: ONBOARD ACQ FOR 101-106,111; req_2: SEQ 101-115; ! linenum: 101.000 targname: BD+28D4211 config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G130H num_exp: 1 time_per_exp: 800S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 101.020 targname: BD+28D4211 config: FOS/BL opmode: ACCUM aperture: 4.3 sp_element: G130H, POL0-B num_exp: 1 time_per_exp: 1600S priority: 1 ! linenum: 101.100 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: G130H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 101 NO SLEW; ! linenum: 101.200 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 101.3 NO SLEW; ! linenum: 101.300 targname: BD+28D4211 config: ^ opmode: IMAGE aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 950S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 101.400 targname: BD+28D4211 config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G160L num_exp: 1 time_per_exp: 280S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 101.410 targname: BD+28D4211 config: FOS/BL opmode: ACCUM aperture: 4.3 sp_element: G160L, POL0-B num_exp: 1 time_per_exp: 500S priority: 1 ! linenum: 101.500 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: G160L num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 101.4 NO SLEW; ! linenum: 101.600 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: PRISM num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 101.8 NO SLEW; ! linenum: 101.800 targname: BD+28D4211 config: ^ opmode: IMAGE aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 480S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 101.900 targname: BD+28D4211 config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G270H num_exp: 1 time_per_exp: 110S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 101.910 targname: BD+28D4211 config: ^ opmode: ACCUM aperture: 4.3 sp_element: G270H, POL0-B num_exp: 1 time_per_exp: 210S priority: 1 ! linenum: 102.000 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 101.9-101.91 NO SLEW; ! linenum: 103.000 targname: WAVE config: ^ opmode: ACCUM aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: DEF priority: 1 req_1: CALIB FOR 104-105 NO SLEW; ! linenum: 104.000 targname: BD+28D4211 config: ^ opmode: IMAGE aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 200S s_to_n: 100 fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=3, param_3: Y-SPACE=10.7, param_4: COMB=YES, param_5: Y=DEF ! linenum: 105.000 targname: BD+28D4211 config: ^ opmode: ACCUM aperture: 4.3 sp_element: G190H, POL0-B num_exp: 1 time_per_exp: 200S priority: 1 ! linenum: 106.000 targname: BD+28D4211 config: FOS/BL opmode: ACQ/PEAK aperture: 0.25-PAIR-B sp_element: G130H num_exp: 1 time_per_exp: 3.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.05 req_1: ONBOARD ACQ FOR 108-110; ! linenum: 108.000 sequence_1: USE sequence_2: BD28-BLUE targname: BD+28D4211 aperture: 0.25-PAIR-B time_per_exp: X3.0 ! linenum: 109.000 sequence_1: USE sequence_2: BD28-BLUE targname: BD+28D4211 aperture: 0.5-PAIR-B time_per_exp: X1.6 ! linenum: 110.000 sequence_1: USE sequence_2: BD28-BLUE targname: BD+28D4211 aperture: 1.0-PAIR-B ! linenum: 111.000 targname: BD+28D4211 config: FOS/BL opmode: ACQ/PEAK aperture: 0.25-PAIR-A sp_element: G130H num_exp: 1 time_per_exp: 3.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.05 req_1: ONBOARD ACQ FOR 113-115; ! linenum: 113.000 sequence_1: USE sequence_2: BD28-BLUE targname: BD+28D4211 aperture: 0.25-PAIR-A time_per_exp: X3.0 ! linenum: 114.000 sequence_1: USE sequence_2: BD28-BLUE targname: BD+28D4211 aperture: 0.5-PAIR-A time_per_exp: X1.6 ! linenum: 115.000 sequence_1: USE sequence_2: BD28-BLUE targname: BD+28D4211 aperture: 1.0-PAIR-A ! ! end of exposure logsheet ! No scan data records found