!  File:  2821C.PROP
!  Database:  PEPDB
!  Date:  17-FEB-1994:15:56:23

coverpage:

  title_1:         SPECTRAL FLAT FIELDS
    proposal_for:  CAL/FOS
    pi_fname:      ANNE
    pi_lname:      KINNEY
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      301-338-4831
    hours_pri:     18.30
    num_pri:       6
    fos:           Y
    pi_position:   I.S.
! end of coverpage

abstract:

    line_1:        The diode to diode variations and photocathode non-
    line_2:        uniformities of the FOS detectors were determined in SV
    line_3:        for spectra obtained through the single apertures.  Additional flat field
    line_4:        calibrations will be performed in cycle 1 to verify stability
    line_5:        and to extend the calibration to include the paired aperture spectra.
    line_6:        In this test, we will obtain spectra of G191-B2B, which is known to have
    line_7:        a very smooth, relatively featureless spectrum. The star will be observed
    line_8:        in every useful detector/disperser combination through
    line_9:        single apertures, and with the most useful dispersers at the photocathode
    line_10:       locations corresponding to paired aperture spectra. Spatial scanning in the
    line_11:       dispersion direction is used to shift the spectra, so that instrumental and
    line_12:       features can be distinguished. The most useful polarizer configurations are
    line_13:       also calibrated (excluding red side polarimetry and including blue side
    line_14:       polarimetry for POL0-B but not for POL0-A).  A second star, BD+28D4211, is
    line_15:       also observed in the same manner, about 6 months later, to establish
    line_16:       photometric and flat-field stability.

!
! end of abstract

general_form_proposers:

  lname:           KINNEY
    fname:         ANNE
    inst:          STSCI
    country:       USA

!

  lname:           HARTIG
    fname:         ANNE
    inst:          STSCI
    country:       USA

!

  lname:           BHATTACHARYA
    fname:         BIDUSHI
    inst:          STSCI
    country:       USA

!

  lname:           BOHLIN
    fname:         RALPH
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           FORD
    fname:         HOLLAND
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        G191-B2B will be observed with the spectral images at the locations
    line_2:        on the photocathode corresponding to target positioning in the
    line_3:        single apertures, for each useful detector/disperser combination,
    line_4:        and corresponding to paired aperture spectra with the most
    line_5:        utilized dispersers.  A spatial scan will be used to
    line_6:        shift the location of the spectra in the dispersion direction, so
    line_7:        that intrinsic features of the stellar spectrum can be distinguished
    line_8:        from detector nonuniformities.  The data will also be obtained
    line_9:        with three ysteps, to assure photometric accuarcy, since the same
    line_10:       data are also useful for inverse sensitivity calibration. The most useful
    line_11:       polarizer configurations will also be calibrated. The
    line_12:       resulting data will be used primarily to determine the spectral
    line_13:       flat field calibration files for FOS RSDP processing. These observations
    line_14:       must be scheduled as early as possible in Cycle 1 to support RSDP
    line_15:       calibration of science data, especially those obtained with the paired
    line_16:       apertures.  A second star, BD+28D4211, also a photometric standard with
    line_17:       relatively smooth spectral distribution, will be observed, preferably near
    line_18:       the mid-point of Cycle 1, to improve the flat-field accuracy and establish
    line_19:       the photometric and flat-field stability.

!

  question:        5
    section:       1
    line_1:        This activity can be accomplished in PCS Coarse Track Mode, if
    line_2:        necessary.  Pointing stability of 10% of the smallest aperture
    line_3:        used (1.0") - 0.10" - is required.

!

  question:        6
    section:       1
    line_1:        This test is stray light sensitive.
    line_2:        It is imoerative that the observations of G191-B2B be scheduled
    line_3:        as early as possible during Cycle1, in order to support RSDP
    line_4:        calibration of science data, especially those obtained with
    line_5:        the paired apertures.

!

  question:        7
    section:       1
    line_1:        Data reduction and analysis will be performed at the STScI.
    line_2:        This is a calibration, so the
    line_3:        resulting data will need to be incorporated into CDBS for use
    line_4:        by the PODPS pipeline.

!
!end of general form text

general_form_address:

  lname:           KINNEY
    fname:         ANNE
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DR.
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         301-338-4831

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        WD0501+527
    name_2:        G191-B2B
    name_3:        GSC3734-0506
    descr_1:       DAO WHITE DWARF.
    pos_1:         RA=05H 05M 30.6S +/- 0.01S,
    pos_2:         DEC=+52D 49' 54.0" +/- 0.2",
    pos_3:         PLATE-ID=0005
    equinox:       2000
    pm_or_par:     Y
    pos_epoch_bj:  J
    pos_epoch_yr:  2000.00
    ra_pm_val:     0.000333
    ra_pm_unct:    0.000333
    dec_pm_val:    -0.0880
    dec_pm_unct:   0.0050
    comment_1:     THE GUIDE STAR CATALOG NAME
    comment_2:     IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 11.78 +/- 0.02
    fluxnum_2:     2
    fluxval_2:     B = 11.44 +/- 0.02
    fluxnum_3:     3
    fluxval_3:     U = 10.24 +/- 0.02

!

    targnum:       2
    name_1:        BD+28D4211
    name_2:        GSC 2214-1198
    descr_1:       SUBDWARF O PHOTOMETRIC STANDARD.
    pos_1:         RA = 21H 51M 11.1S +/- 0.01S,
    pos_2:         DEC = +28D 51' 51.8" +/- 0.2"
    equinox:       2000
    comment_1:     THE GSC NAME IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 10.53 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B = 10.19 +/- 0.05

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE
    sequence_2:    RED-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        ACCUM
    aperture:      0.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  DEF
    priority:      1
    req_1:         SEQ 1-8 NO GAP;
    comment_1:     USE THE CROSS-STRAPPED LAMP

!

    linenum:       1.100
    sequence_1:    DEFINE
    sequence_2:    RED-S
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  60S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7

!

    linenum:       1.200
    sequence_1:    DEFINE
    sequence_2:    RED-S
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  40S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       3.000
    sequence_1:    DEFINE
    sequence_2:    RED-S
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       4.100
    sequence_1:    DEFINE
    sequence_2:    RED-S
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       5.000
    sequence_1:    DEFINE
    sequence_2:    RED-S
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  1260S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       6.000
    sequence_1:    DEFINE
    sequence_2:    RED-S
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  250S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       7.000
    sequence_1:    DEFINE
    sequence_2:    RED-S
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  50S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       8.000
    sequence_1:    DEFINE
    sequence_2:    RED-S
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  630S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN
    comment_1:     END SEQ FOR RED SIDE, SINGLE AP.

!

    linenum:       10.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        ACCUM
    aperture:      0.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  DEF
    priority:      1
    req_1:         SEQ 10-15.2 NO GAP;

!

    linenum:       10.100
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  250S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7

!

    linenum:       10.200
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  170S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       11.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  135S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       11.100
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        ACCUM
    aperture:      4.3
    sp_element:    G270H,POL0-B
    num_exp:       1
    time_per_exp:  250S
    s_to_n:        80
    priority:      1
    req_1:         SPATIAL SCAN

!

    linenum:       12.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        ACCUM
    aperture:      4.3
    sp_element:    G190H,POL0-B
    num_exp:       1
    time_per_exp:  390S
    s_to_n:        80
    priority:      1
    req_1:         SPATIAL SCAN

!

    linenum:       12.100
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       13.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1150S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       13.100
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        ACCUM
    aperture:      4.3
    sp_element:    G130H,POL0-B
    num_exp:       1
    time_per_exp:  2300S
    s_to_n:        80
    priority:      1
    req_1:         SPATIAL SCAN

!

    linenum:       14.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  1170S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       15.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  300S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    req_1:         SPATIAL SCAN

!

    linenum:       15.200
    sequence_1:    DEFINE
    sequence_2:    BLUE-S
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  600S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    comment_1:     END SEQ. FOR BLUE SIDE, SINGLE AP.

!

    linenum:       20.000
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SEQ 20-26.5 NO GAP;
    req_2:         SPATIAL SCAN

!

    linenum:       20.500
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       21.000
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       21.500
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       22.000
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  1260S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       22.500
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  1260S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       23.000
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  240S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       23.500
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  240S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       24.000
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  50S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       24.500
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  50S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       25.000
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  630S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       25.500
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  630S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       26.000
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  40S
    s_to_n:        100
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       26.500
    sequence_1:    DEFINE
    sequence_2:    RED-P
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  40S
    s_to_n:        100
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN
    comment_1:     END SEQ FOR RED SIDE, PAIRED AP

!

    linenum:       30.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1150S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SEQ 30-35.5 NO GAP;
    req_2:         SPATIAL SCAN

!

    linenum:       30.500
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1150S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       31.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  1170S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       31.500
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  1170S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       32.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  300S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       32.500
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  300S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       33.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  160S
    s_to_n:        100
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       33.500
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  160S
    s_to_n:        100
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       34.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  130S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       34.500
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  130S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN

!

    linenum:       35.000
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=253
    req_1:         SPATIAL SCAN

!

    linenum:       35.500
    sequence_1:    DEFINE
    sequence_2:    BLUE-P
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        80
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       COMB=YES,
    param_3:       Y-SIZE=3,
    param_4:       Y-SPACE=10.7
    param_5:       Y-OFFSET=-253
    req_1:         SPATIAL SCAN
    comment_1:     END SEQ. FOR BLUE SIDE PAIRED AP

!

    linenum:       100.000
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 100.1;
    req_2:         SEQ 100-110 NO GAP;
    req_3:         CYCLE 1/100-420;
    req_4:         SPATIAL SCAN;
    req_5:         GROUP 100-120 WITHIN 7D;
    comment_1:     THIS SEQUENCE SHOULD BE SCHEDULED AS
    comment_2:     EARLY AS POSSIBLE IN CYCLE1.

!

    linenum:       100.100
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 101.0;
    req_2:         SPATIAL SCAN;

!

    linenum:       101.000
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  2S
    priority:      1
    param_1:       SEARCH-SIZE=4,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 110;

!

    linenum:       110.000
    sequence_1:    USE
    sequence_2:    RED-S
    targname:      WD0501+527

!

    linenum:       115.000
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 115.1;
    req_2:         SEQ 115-120 NO GAP;
    req_4:         SPATIAL SCAN;
    comment_1:     THIS SEQUENCE SHOULD BE SCHEDULED AS
    comment_2:     EARLY AS POSSIBLE IN CYCLE1.

!

    linenum:       115.100
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 116.0;
    req_2:         SPATIAL SCAN;

!

    linenum:       116.000
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  2S
    priority:      1
    param_1:       SEARCH-SIZE=4,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 120;

!

    linenum:       120.000
    sequence_1:    USE
    sequence_2:    RED-P
    targname:      WD0501+527

!

    linenum:       200.000
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 200.1;
    req_2:         SEQ 200-210 NO GAP;
    req_3:         SPATIAL SCAN;
    req_4:         GROUP 200-220 WITHIN 7D;
    comment_1:     THIS SEQUENCE SHOULD BE SCHEDULED AS
    comment_2:     EARLY AS POSSIBLE IN CYCLE1.

!

    linenum:       200.100
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 201.0;
    req_2:         SPATIAL SCAN;

!

    linenum:       201.000
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  2S
    priority:      1
    param_1:       SEARCH-SIZE=4,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 210;

!

    linenum:       210.000
    sequence_1:    USE
    sequence_2:    BLUE-S
    targname:      WD0501+527

!

    linenum:       215.000
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 215.1;
    req_2:         SEQ 215-220 NO GAP;
    req_3:         SPATIAL SCAN;
    comment_1:     THIS SEQUENCE SHOULD BE SCHEDULED AS
    comment_2:     EARLY AS POSSIBLE IN CYCLE1.

!

    linenum:       215.100
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 216.0;
    req_2:         SPATIAL SCAN;

!

    linenum:       216.000
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  2S
    priority:      1
    param_1:       SEARCH-SIZE=4,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 220;

!

    linenum:       220.000
    sequence_1:    USE
    sequence_2:    BLUE-P
    targname:      WD0501+527

!

    linenum:       300.000
    targname:      BD+28D4211
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 300.1;
    req_2:         SEQ 300-310 NO GAP;
    req_3:         AFTER 100 BY 180D +/- 60D;
    req_4:         SPATIAL SCAN;
    req_5:         GROUP 300-320 WITHIN 7D;

!

    linenum:       300.100
    targname:      BD+28D4211
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 301;
    req_2:         SPATIAL SCAN;

!

    linenum:       301.000
    targname:      BD+28D4211
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  2S
    priority:      1
    param_1:       SEARCH-SIZE=4,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 310-310;

!

    linenum:       310.000
    sequence_1:    USE
    sequence_2:    RED-S
    targname:      BD+28D4211
    time_per_exp:  X0.5

!

    linenum:       315.000
    targname:      BD+28D4211
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 315.1;
    req_2:         SEQ 315-320 NO GAP;
    req_4:         SPATIAL SCAN;

!

    linenum:       315.100
    targname:      BD+28D4211
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 316;
    req_2:         SPATIAL SCAN;

!

    linenum:       316.000
    targname:      BD+28D4211
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  2S
    priority:      1
    param_1:       SEARCH-SIZE=4,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 320;

!

    linenum:       320.000
    sequence_1:    USE
    sequence_2:    RED-P
    targname:      BD+28D4211
    time_per_exp:  X0.5

!

    linenum:       400.000
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 400.1;
    req_2:         SEQ 400-410 NO GAP;
    req_3:         SPATIAL SCAN;
    req_4:         AFTER 200 BY 180D +/- 60D;
    req_5:         GROUP 400-420 WITHIN 7D;

!

    linenum:       400.100
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 401.0;
    req_2:         SPATIAL SCAN;

!

    linenum:       401.000
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  2S
    priority:      1
    param_1:       SEARCH-SIZE=4,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 410;

!

    linenum:       410.000
    sequence_1:    USE
    sequence_2:    BLUE-S
    targname:      BD+28D4211
    time_per_exp:  X0.5

!

    linenum:       415.000
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 415.1;
    req_2:         SEQ 415-420 NO GAP;
    req_3:         SPATIAL SCAN;

!

    linenum:       415.100
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    req_1:         ONBOARD ACQ FOR 416.0;
    req_2:         SPATIAL SCAN;

!

    linenum:       416.000
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  2S
    priority:      1
    param_1:       SEARCH-SIZE=4,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 420;

!

    linenum:       420.000
    sequence_1:    USE
    sequence_2:    BLUE-P
    targname:      BD+28D4211
    time_per_exp:  X0.5

!
! end of exposure logsheet

scan_data:

    line_list:     1.2-8.0, 10.2-15.1
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    3
    dwell_secs:       0.00
    scan_width:       0.0000
    scan_length:      3.5800
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    1.7900
    wid_offset:    0.0000

!

    line_list:     20,21,22,23,24,25,26,30,31,32,33,34,35
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    3
    dwell_secs:       0.00
    scan_width:       0.0000
    scan_length:      3.5800
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    1.7900
    wid_offset:    1.5000

!

    line_list:     20.5,21.5,22.5,23.5,24.5,25.5,26.5
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    3
    dwell_secs:       0.00
    scan_width:       0.0000
    scan_length:      3.5800
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    1.7900
    wid_offset:    -1.5000

!

    line_list:     30.5,31.5,32.5,33.5,34.5,35.5
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    3
    dwell_secs:       0.00
    scan_width:       0.0000
    scan_length:      3.5800
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    1.7900
    wid_offset:    -1.5000

!

    line_list:     100.0,115.0,200.0,215.0,300.0,315.0,400.0,415.0
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    3
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      2.8000
    sides_angle:    90.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:   0.0000
    scan_frame:    S/C
    len_offset:    1.4
    wid_offset:    0.0

!

    line_list:     100.1,115.1,200.1,215.1,300.1,315.1,400.1,415.1
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    6
    dwell_secs:       1.00
    scan_width:       0.7000
    scan_length:      3.5000
    sides_angle:    90.0000
    number_lines:  2
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    1.75
    wid_offset:    0.35

!
! end of scan data