!  File:  2819C.PROP
!  Database:  PEPDB
!  Date:  17-FEB-1994:15:39:59

coverpage:

  title_1:         FOS DARK AND SKY BACKGROUNDS
    proposal_for:  CAL/FOS
    pi_fname:      GEORGE
    pi_lname:      HARTIG
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      301-338-4966
    fos:           Y
! end of coverpage

abstract:

    line_1:        Measurements of the background, both internal (dark) and
    line_2:        external (sky), will be obtained with the FOS when other SIs
    line_3:        are prime. The sky data will be obtained at high galactic
    line_4:        latitude, low galactic latitude, and in the ecliptic plane,
    line_5:        to determine if there are any differences in the sky
    line_6:        spectrum. These observations will allow us to determine when
    line_7:        sky measurements will be required for science data.  Some sky
    line_8:        observations will be read from two different portions of the
    line_9:        photocathode, to check if the dark count is position
    line_10:       dependent. If it is not, then normal science dark measurements
    line_11:       can be obtained by changing the y-base, rather than closing
    line_12:       the entrance aperture, thus allowing for more efficient observing.
    line_14:       The dark measurements will be obtained with a variety of SIs
    line_15:       prime, to test for any EMI problems, and during SAA passages,
    line_16:       to determine if science observations are possible during this
    line_17:       period.  Because these parallel observations require very
    line_19:       complicated scheduling and commanding, we do not know how
    line_20:       much of the SV program will have been completed by the end of SV.

!
! end of abstract

general_form_proposers:

  lname:           HARTIG
    fname:         GEORGE
    inst:          STSCI
    country:       USA

!

  lname:           KINNEY
    fname:         ANNE
    inst:          STSCI
    country:       USA

!

  lname:           BHATTACHARYA
    fname:         BIDUSHI
    inst:          STSCI
    country:       USA

!

  lname:           BOHLIN
    fname:         RALPH
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           FORD
    fname:         HOLLAND
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        In this test, we will obtain data on the sky and dark backgrounds. Sky
    line_2:        measurements will be obtain at high galactic latitude, low galactic latitude,
    line_3:        and the ecliptic plane, using the low dispersion gratings and the prism. Both
    line_4:        detectors will be used, and data read from two different positions on the
    line_5:        photocathode. The observations will be repeated as often as possible.
    line_7:        Dark measurements will be obtained using both detectors.
    line_8:        Data will be obtained with a variety of SIs prime, to test
    line_9:        for an EMI problems, and data will be taken inside the SAA,
    line_10:       to see if it may be possible to observe in this area. The
    line_11:       observations will be repeated as often as possible.
    line_13:       Although the DARK measurements will be used to determine the
    line_14:       average level of dark counts to subtract from the science
    line_15:       data, the primary purpose of the DARKs is to
    line_16:       determine which FOS channels should be disabled.  It is clear
    line_17:       that all channels which exceed spec continually or
    line_18:       intermittently should be turned off.  Even though we have
    line_19:       much information from ground-based tests, those data, taken at
    line_20:       room temperature, may have listed as good channels which will
    line_21:       be bad at operating temperatures.  There may also be channels
    line_22:       which are noisy on the ground that will be good under
    line_23:       operating conditions.

!

  question:        3
    section:       2
    line_1:        These channels could improve either because the temperature
    line_2:        is lower or because the (intermittent) noise was due to
    line_3:        interference from something in the environment which will
    line_4:        not be present on orbit.  For this reason, all channels
    line_5:        should be enable for these DARK observations.  Because of the
    line_6:        intermittent nature of the noise in the channels (some bad
    line_7:        channels showed up in only one or two of 10 or 20 darks), it
    line_8:        is imperative to have as many DARKs.
    line_10:       The parameters specified for the DARK exposures should result
    line_11:       in the following values for FOS parameters:
    line_13:       livetime = 0.500
    line_14:       deadtime = 0.010
    line_15:       ints     = 40
    line_16:       patterns = 1
    line_19:       The photocathode will be sdampled at half-diode-height
    line_20:       intervals over the YBASE range from -1472 to +1472, which
    line_21:       encompasses all normal science image locations.

!

  question:        5
    section:       1
    line_1:        All observations are parallel. We would like some of the dark measurements to
    line_2:        be obtained in the SAA. For the sky measurements, one must be careful not to
    line_3:        place a bright star (V~8) in the FOS aperture. However, the probability of this
    line_4:        occurring is small (~10 {supered -7}), so the scheduling constraint is not
    line_5:        great.
    line_7:        If possible, schedule the exposures up to 90 minutes in
    line_8:        length. Don't schedule the exposures for less than 30 minutes.
    line_10:       For all DARK observations, ALL CHANNELS should be enabled.

!

  question:        6
    section:       1
    line_1:        This test is not stray light sensitive. 40 hours of observation is internal
    line_2:        dark measurements.

!

  question:        7
    section:       1
    line_1:        Data reduction and analysis will be performed at the ST ScI.

!
!end of general form text

general_form_address:

  lname:           HARTIG
    fname:         GEORGE
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DR.
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

generic_targets:

  targnum_1:       1
    targnum_2:     20
    name_1:        SKYLOW
    descr_1:       SKY BACKGROUND IN THE GALACTIC PLANE.
    criteria_1:    ANY FIELD AT LOW GALACTIC LATITUDE (B<10). OBSERVE WHEN ANOTHER SI
    criteria_2:    PRIME.
    comment_1:     AS PER PROJECT POLICY, THESE
    comment_2:     GENERIC TARGETS WILL BE
    comment_3:     REPLACED WITH FIXED TARGETS
    comment_4:     WHEN THE APPROPRIATE
    comment_5:     MECHANISM IS DETERMINED.

!

  targnum_1:       21
    targnum_2:     40
    name_1:        SKYHIGH
    descr_1:       SKY BACKGROUND OUT OF THE GALACTIC PLANE.
    criteria_1:    ANY FIELD AT HIGH GALACTIC LATITUDE (B>30). OBSERVE WHEN ANOTHER
    criteria_2:    SI PRIME.
    comment_1:     AS PER PROJECT POLICY, THESE
    comment_2:     GENERIC TARGETS WILL BE
    comment_3:     REPLACED WITH FIXED TARGETS
    comment_4:     WHEN THE APPROPRIATE
    comment_5:     MECHANISM IS DETERMINED.

!

  targnum_1:       41
    targnum_2:     60
    name_1:        SKYECL
    descr_1:       SKY BACKGROUND IN THE ECLIPTIC PLANE.
    criteria_1:    ANY FIELD IN THE ECLIPTIC PLANE. (BETA<5) OBSERVE WHEN ANOTHER SI
    criteria_2:    PRIME.
    comment_1:     AS PER PROJECT POLICY, THESE
    comment_2:     GENERIC TARGETS WILL BE
    comment_3:     REPLACED WITH FIXED TARGETS
    comment_4:     WHEN THE APPROPRIATE
    comment_5:     MECHANISM IS DETERMINED.

!
! end of generic targets

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE
    sequence_2:    BACKB1
    targname:      #
    config:        FOS/BL
    opmode:        ACCUM
    aperture:      1.0-PAIR
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  30M
    priority:      1
    req_1:         PARALLEL;
    req_2:         NON-INT;

!

    linenum:       2.000
    sequence_1:    DEFINE
    sequence_2:    BACKB2
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      ^
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  30M
    priority:      1
    req_1:         PARALLEL;
    req_2:         NON-INT;

!

    linenum:       3.000
    sequence_1:    DEFINE
    sequence_2:    BACKB3
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      ^
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  30M
    priority:      1
    req_1:         PARALLEL;
    req_2:         NON-INT;

!

    linenum:       3.100
    sequence_1:    DEFINE
    sequence_2:    BACKR1
    targname:      #
    config:        FOS/RD
    opmode:        ACCUM
    aperture:      1.0-PAIR
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  30M
    priority:      1
    req_1:         PARALLEL;
    req_2:         NON-INT;

!

    linenum:       3.200
    sequence_1:    DEFINE
    sequence_2:    BACKR2
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      ^
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  30M
    priority:      1
    req_1:         PARALLEL;
    req_2:         NON-INT;

!

    linenum:       3.300
    sequence_1:    DEFINE
    sequence_2:    BACKR3
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      ^
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  30M
    priority:      1
    req_1:         PARALLEL;
    req_2:         NON-INT;

!

    linenum:       4.000
    sequence_1:    DEFINE
    sequence_2:    DARK
    targname:      DARK
    config:        #
    opmode:        IMAGE
    aperture:      BLANK
    sp_element:    #
    num_exp:       4
    time_per_exp:  8M
    priority:      1
    param_1:       STEP-TIME=20.0,
    param_2:       Y-SPACE=128,
    param_3:       Y-SIZE=24,
    param_4:       Y=0,
    param_5:       COMB=NO,
    param_6:       SUB-STEP=1
    req_1:         PARALLEL;
    req_2:         NON-INT;
    comment_1:     PLEASE SCHEDULE SOME DARK
    comment_2:     OBSERVATIONS INSIDE THE SAA AND WITH
    comment_3:     VARIOUS SIS PRIME.
    comment_4:     ALL CHANNELS SHOULD BE ENABLED FOR ALL
    comment_5:     DARK OBSERVATIONS.

!

    linenum:       5.000
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/RD
    sp_element:    G780H
    req_1:         CYCLE 1/5-25.5;
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.010
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.020
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.030
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.040
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.050
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.060
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.070
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.500
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.510
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.520
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.530
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.540
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.550
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.560
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       5.570
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.000
    sequence_1:    USE
    sequence_2:    DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK IN THE SAA.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.001
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK IN THE SAA.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.002
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK IN THE SAA.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.003
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK IN THE SAA.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.005
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH HSP.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.006
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH HSP.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.007
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH HRS.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.008
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH HRS.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.010
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.011
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.012
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.013
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.014
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.015
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.016
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.020
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.021
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.022
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.023
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.024
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.025
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.026
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.027
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.028
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.029
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.030
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.031
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.032
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.033
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       6.034
    sequence_1:    USE DARK
    config:        FOS/RD
    sp_element:    G780H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.
    comment_3:     FROM EXPOSURE LINES 6.000-6.034; TAKE
    comment_4:     4 IN SAA, 2 PAR W/HSP; 2 PAR W/HRS;
    comment_5:     7 PAR W/FOC AND 15 PAR W/WFPC.

!

    linenum:       7.000
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK IN THE SAA.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.001
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK IN THE SAA.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.002
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK IN THE SAA.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.003
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK IN THE SAA.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.005
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH HRS.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.006
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH HRS.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.008
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH HSP.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.009
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH HSP.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.010
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.011
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.012
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.013
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.014
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.015
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.016
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH FOC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.020
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.021
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.022
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.023
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.024
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.025
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.026
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.027
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.028
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.029
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.030
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.031
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.032
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.033
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.

!

    linenum:       7.034
    sequence_1:    USE DARK
    config:        FOS/BL
    sp_element:    G130H
    comment_1:     TAKE DARK PARALLEL WITH WF/PC.
    comment_2:     ALL CHANNELS SHOULD BE ENABLED.
    comment_3:     FROM EXP. LINES 7.000-7.034, TAKE 4
    comment_4:     IN SAA; 2 PAR W/HSP; 2 PAR W/HRS; 7
    comment_5:     PAR W/FOC; 15 PAR W/WFPC.

!

    linenum:       8.000
    sequence_1:    USE
    sequence_2:    BACKR1
    targname:      SKYLOW
    req_1:         DO FOR TARGET 1-5;

!

    linenum:       8.500
    sequence_1:    USE
    sequence_2:    BACKR1
    targname:      SKYLOW
    req_1:         DO FOR TARGET 6-20;

!

    linenum:       9.000
    sequence_1:    USE
    sequence_2:    BACKB1
    targname:      ^
    req_1:         DO FOR TARGETS 1-5;

!

    linenum:       9.500
    sequence_1:    USE
    sequence_2:    BACKB1
    targname:      ^
    req_1:         DO FOR TARGETS 6-20;

!

    linenum:       10.000
    sequence_1:    USE
    sequence_2:    BACKR2
    targname:      SKYLOW
    req_1:         DO FOR TARGETS 1-5;

!

    linenum:       10.500
    sequence_1:    USE
    sequence_2:    BACKR2
    targname:      SKYLOW
    req_1:         DO FOR TARGETS 6-20;

!

    linenum:       11.000
    sequence_1:    USE
    sequence_2:    BACKB2
    targname:      SKYLOW
    req_1:         DO FOR TARGETS 1-5;

!

    linenum:       11.500
    sequence_1:    USE
    sequence_2:    BACKB2
    targname:      ^
    req_1:         DO FOR TARGETS 6-20;

!

    linenum:       12.000
    sequence_1:    USE
    sequence_2:    BACKR3
    targname:      ^
    req_1:         DO FOR TARGETS 1-5;

!

    linenum:       12.500
    sequence_1:    USE
    sequence_2:    BACKR3
    targname:      ^
    req_1:         DO FOR TARGETS 6-20;

!

    linenum:       13.000
    sequence_1:    USE
    sequence_2:    BACKB3
    targname:      ^
    req_1:         DO FOR TARGETS 1-5;

!

    linenum:       13.500
    sequence_1:    USE
    sequence_2:    BACKB3
    targname:      ^
    req_1:         DO FOR TARGETS 6-20;
    comment_1:     THE ABOVE EXPOSURES ARE 60 HOURS OF
    comment_2:     SKY AT LOW GALACTIC LATITUDE.

!

    linenum:       14.000
    sequence_1:    USE
    sequence_2:    BACKR1
    targname:      SKYHIGH
    req_1:         DO FOR TARGETS 21-25;

!

    linenum:       14.500
    sequence_1:    USE
    sequence_2:    BACKR1
    targname:      SKYHIGH
    req_1:         DO FOR TARGETS 26-40;

!

    linenum:       15.000
    sequence_1:    USE
    sequence_2:    BACKB1
    targname:      ^
    req_1:         DO FOR TARGETS 21-25;

!

    linenum:       15.500
    sequence_1:    USE
    sequence_2:    BACKB1
    targname:      ^
    req_1:         DO FOR TARGETS 26-40;

!

    linenum:       16.000
    sequence_1:    USE
    sequence_2:    BACKR2
    targname:      SKYHIGH
    req_1:         DO FOR TARGETS 21-25;

!

    linenum:       16.500
    sequence_1:    USE
    sequence_2:    BACKR2
    targname:      ^
    req_1:         DO FOR TARGETS 26-40;

!

    linenum:       17.000
    sequence_1:    USE
    sequence_2:    BACKB2
    targname:      ^
    req_1:         DO FOR TARGETS 21-25;

!

    linenum:       17.500
    sequence_1:    USE
    sequence_2:    BACKB2
    targname:      ^
    req_1:         DO FOR TARGETS 26-40;

!

    linenum:       18.000
    sequence_1:    USE
    sequence_2:    BACKR3
    targname:      ^
    req_1:         DO FOR TARGETS 21-25;

!

    linenum:       18.500
    sequence_1:    USE
    sequence_2:    BACKR3
    targname:      ^
    req_1:         DO FOR TARGETS 26-40;

!

    linenum:       19.000
    sequence_1:    USE
    sequence_2:    BACKB3
    targname:      ^
    req_1:         DO FOR TARGETS 21-25;

!

    linenum:       19.500
    sequence_1:    USE
    sequence_2:    BACKB3
    targname:      ^
    req_1:         DO FOR TARGETS 26-40;
    comment_1:     THE ABOVE EXPOSURES ARE 60 HOURS OF
    comment_2:     SKY AT HIGH GALACTIC LATITUDES.

!

    linenum:       20.000
    sequence_1:    USE
    sequence_2:    BACKR1
    targname:      SKYECL
    req_1:         DO FOR TARGETS 41-45;

!

    linenum:       20.500
    sequence_1:    USE
    sequence_2:    BACKR1
    targname:      SKYECL
    req_1:         DO FOR TARGETS 46-60;

!

    linenum:       21.000
    sequence_1:    USE
    sequence_2:    BACKB1
    targname:      SKYECL
    req_1:         DO FOR TARGETS 41-45;

!

    linenum:       21.500
    sequence_1:    USE
    sequence_2:    BACKB1
    targname:      ^
    req_1:         DO FOR TARGETS 46-60;

!

    linenum:       22.000
    sequence_1:    USE
    sequence_2:    BACKR2
    targname:      ^
    req_1:         DO FOR TARGETS 41-45;

!

    linenum:       22.500
    sequence_1:    USE
    sequence_2:    BACKR2
    targname:      ^
    req_1:         DO FOR TARGETS 46-60;

!

    linenum:       23.000
    sequence_1:    USE
    sequence_2:    BACKB2
    targname:      ^
    req_1:         DO FOR TARGETS 41-45;

!

    linenum:       23.500
    sequence_1:    USE
    sequence_2:    BACKB2
    targname:      ^
    req_1:         DO FOR TARGETS 46-60;

!

    linenum:       24.000
    sequence_1:    USE
    sequence_2:    BACKR3
    targname:      ^
    req_1:         DO FOR TARGETS 41-45;

!

    linenum:       24.500
    sequence_1:    USE
    sequence_2:    BACKR3
    targname:      ^
    req_1:         DO FOR TARGETS 46-60;

!

    linenum:       25.000
    sequence_1:    USE
    sequence_2:    BACKB3
    targname:      ^
    req_1:         DO FOR TARGETS 41-45;

!

    linenum:       25.500
    sequence_1:    USE
    sequence_2:    BACKB3
    targname:      ^
    req_1:         DO FOR TARGETS 46-60;
    comment_1:     THE ABOVE EXPOSURES ARE 60 HOURS OF
    comment_2:     SKY IN THE ECLIPTIC PLANE.

!
! end of exposure logsheet

! No scan data records found