! +====================+ ! | PED OUTPUT PRODUCT | ! +====================+ ! ! /touchdown/data1/gerb/proposals/242.prop ! Generated by PREPROCESSOR, version 6.0e ! Date: Fri Apr 12 08:24:06 EDT 1996 Proposal_Information Title: Non-centerlined Acquisition Scenario for SNAP proposals Proposal_Category: SNAP Scientific_Category: Cycle: 6 Investigators PI_Name: Andy Gerb PI_Institution: SPACE TELESCOPE SCIENCE INSTITUTE Abstract: This proposal is intended as a copy of proposal 241 with the proposal category set to SNAP. Based on opr 31024, SNAPS have different acquisition scenarios as other proposals, so they need to be tested in a separate proposal. Questions Observing_Description: Real_Time_Justification: Calibration_Justification: Additional_Comments: Fixed_Targets Target_Number: 1 Target_Name: FIXED Alternate_Names: Description: STAR,BROWN DWARF, Position: RA=0.0000000D +/- 0.0001000D,DEC=0.0000000D +/- 0.0001000D Equinox: J2000 RV_or_Z: RA_PM: 0.0 Dec_PM: 0.0 Epoch: Annual_Parallax: 0.0 Flux: V = 0.0+/-0.1 Comments: Target_Number: 2 Target_Name: FIXED2 Alternate_Names: Description: STAR,BROWN DWARF, Position: RA=0.001D +/- 0.0001D,DEC=0.0D +/- 0.0001D Equinox: J2000 RV_or_Z: RA_PM: 0.0 Dec_PM: 0.0 Epoch: Annual_Parallax: 0.0 Flux: V = 0.0+/-0.1 Comments: Solar_System_Targets Target_Number: 3 Target_Name: NEPTUNE Description: PLANET NEPTUNE Level_1: STD=NEPTUNE Level_2: Level_3: Window: Ephem_Uncert: 15 S Acq_Uncert: 15 " Flux: V = 8.0+/-0.1 Comments: Generic_Targets Scan_Data Scan_Number: 1 FGS_Scan: Cont_or_Dwell: D Dwell_Points: 3 Dwell_Secs: 50 Scan_Width: 20 Scan_Length: 20 Sides_Angle: 90 Number_Lines: 2 Scan_Rate: First_Line_PA: 0 Scan_Frame: S/C Length_Offset: 10 Width_Offset: 10 Scan_Number: 2 FGS_Scan: Y Cont_or_Dwell: C Dwell_Points: Dwell_Secs: Scan_Width: 20 Scan_Length: 20 Sides_Angle: 90 Number_Lines: 2 Scan_Rate: First_Line_PA: 0 Scan_Frame: S/C Length_Offset: 10 Width_Offset: 10 Visits Visit_Number: 01 Visit_Requirements: On_Hold_Comments: Visit_Comments: This tests that a DITHER is treated as motion in the obset. Exposure_Number: 10 Target_Name: FIXED Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: 2260.0 Optional_Parameters: DITHER-TYPE=BOX Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: Comments: Visit_Number: 02 Visit_Requirements: On_Hold_Comments: Visit_Comments: This tests that LRF scan is treated as motion in the obset. Exposure_Number: 10 Target_Name: FIXED Config: WFPC2 Opmode: IMAGE Aperture: LRF Sp_Element: LRF Wavelength: 4000-4500 Optional_Parameters: N-STEP=3 DELTA-LAMBDA=100 Number_of_Iterations: 2 Time_Per_Exposure: 100S Special_Requirements: Comments: Visit_Number: 03 Visit_Requirements: On_Hold_Comments: Visit_Comments: This test the treatment of SPATIAL SCANs for non-centerline acqs. Exposure_Number: 10 Target_Name: FIXED Config: FGS Opmode: SCAN Aperture: PRIME Sp_Element: F650W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: SPATIAL SCAN 2 10 Comments: FGS SCANs are not considered motion. Exposure_Number: 20 Target_Name: FIXED Config: WFPC2 Opmode: IMAGE Aperture: PC1-FIX Sp_Element: F170W Wavelength: 1600.0 Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: SPATIAL SCAN 1 20 Comments: SPATIAL SCANs are considered motion. Visit_Number: 04 Visit_Requirements: On_Hold_Comments: Visit_Comments: This visit contains a SAM (and therefore motion in the obset). Exposure_Number: 10 Target_Name: FIXED Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: Comments: Exposure_Number: 20 Target_Name: FIXED2 Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: Comments: Visit_Number: 05 Visit_Requirements: On_Hold_Comments: Visit_Comments: Visit contains REQ EPHEM CORR which causes motion in the obset. Exposure_Number: 10 Target_Name: NEPTUNE Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: Comments: Exposure_Number: 20 Target_Name: NEPTUNE Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: REQ EPHEM CORR EPHEM1 Comments: REQ EPHEM CORR is motion. Visit_Number: 06 Visit_Requirements: On_Hold_Comments: Visit_Comments: Visit contains moving targets and therefore motion in the obset. Exposure_Number: 10 Target_Name: NEPTUNE Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: Comments: Exposure_Number: 20 Target_Name: NEPTUNE Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: Comments: Visit_Number: 07 Visit_Requirements: On_Hold_Comments: Visit_Comments: Visit uses SAVE OFFSET which causes motion in the obset. Exposure_Number: 10 Target_Name: FIXED Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: SAVE OFFSET OFF001 Comments: Exposure_Number: 20 Target_Name: FIXED Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: Comments: Exposure_Number: 30 Target_Name: FIXED Config: WFPC2 Opmode: IMAGE Aperture: PC1 Sp_Element: F170W Wavelength: Optional_Parameters: Number_of_Iterations: 1 Time_Per_Exposure: 100S Special_Requirements: USE OFFSET OFF001 Comments: Data_Distribution ! Defaults indicated; change if desired Medium: 8MM Blocking_Factor: 10 Ship_To: PI_Address Ship_Via: UPS Recipient_Email: ! Let us know what you think of this template and software! ! Please send a list of your likes and dislikes to your Program Coordinator