! File: 2195C.PROP ! Database: PEPDB ! Date: 17-FEB-1994:03:08:33 coverpage: title_1: FOS COMBINED MODE II TARGET ACQUISITION TEST proposal_for: SV/FOS pi_fname: HOLLAND pi_lname: FORD pi_inst: ST SCI pi_country: USA pi_phone: 301-338-4700 num_pri: 1 fos: Y ! end of coverpage abstract: line_1: Four onboard target acquisition software capabilities will be line_2: verified in this test -- point source binary and firmware line_3: modes, peak-up mode and the occulting aperture peak-down line_4: mode. Each software test sequence will first image a star line_5: in the large aperture and then exercise the onboard software line_6: to attempt to center object. A second image will be obtained line_7: to check on the centering. line_9: This test will be repeated 2 times to check for repeatability. line_11: This program (along with the faint object target acquisition line_12: test 1314) is the highest priority SV activity to be performed. line_14: NOTE: Removed AFTER special requirements from lines 200, 210, 300, 310 due line_15: to transformation processing and propogation of timing links. Comments added line_16: to indicate timing and use of SV timeline to determine schedule. (P. Stanley - line_17: 3 Jan 90) line_19: CHANGED TARGET SELECTION IN EXPOSURE LOGSHEETS FROM LB227 TO NGC188. LB227 IS line_20: NOT AVAILABLE DURING EARLY SV (P. Stanley - 29 Jan 90) ! ! end of abstract general_form_proposers: lname: ANGEL fname: ROGER inst: UNIV OF ARIZONA country: USA ! lname: MARGON fname: BRUCE inst: UNIV OF WASHINGTON country: USA ! lname: BARTKO fname: FRANK inst: MARTIN MARIETTA CORP country: USA ! lname: DAVIDSEN fname: ARTHUR inst: JOHNS HOPKINS UNIV country: USA ! lname: HARMS fname: RICHARD inst: APPLIED RESEARCH CORP country: USA ! lname: BURBIDGE fname: E mi: M inst: UNIV OF CALIF, SAN DIEGO country: USA ! lname: BEAVER fname: EDWARD inst: UNIV OF CALIF, SAN DIEGO country: USA ! lname: BOHLIN fname: RALPH inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! lname: FORD fname: HOLLAND inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: For each of 4 onboard target acquisition modes, the object will line_2: be observed in the camera mode to check on the initial position, line_3: then the onboard software will attempt to center the object with a line_4: second picture obtained to see how accurately it was centered. line_5: The Binary mode will image and center in the large 4.3" line_6: aperture and an image will be obtained in a different smaller line_7: science aperture each visit (1.0, 0.3 and 1.0-PAIR). The firmware line_8: mode will image and center only in the large aperture. The line_9: Peak-up mode will first center the object in the 1.0" line_10: aperture then the 0.3" aperture. The Peak-down mode will line_11: center the object in the 2.0-BAR occulting aperture. line_12: The initial image in each TA mode sequence is taken after a line_13: position target is done to ensure that the target is not centered line_14: in the aperture after the slew to target or completion of the line_15: previous mode's verification. In the event that the previous mode line_16: fails, the HST may have been maneuvered such that the target is line_17: no longer in the 4.3" aperture. If this occurs, the rest line_18: of the modes would probably fail. To prevent this, it is line_19: requested that the initial, slew-to pointing be obtained between line_20: each mode (via FGS guide star reacquisition or equivalent). Comments line_21: have been added to the exposure logsheet where this is required. ! question: 5 section: 1 line_1: OV/SV PREREQUISITES: line_2: FGS/FOS Fine Alignment Phase IIIB (Prop 1444) must have been line_3: completed for both RED and BLUE detectors 7 days prior to third visit, each line_4: detector. This test to update aperture locations in PDB. line_5: SV Prop 1528 must be completed at least 7 days prior to the line_6: second visit of this proposal (lines 200-213). SV Prop 1443 must be completed line_7: at least 7 days prior to this test. line_9: Pointing stability of 10% of the smallest aperture used (0.3") - 0.03" - is line_10: required. line_12: Targets WD2058+342 and NGC-188-136 are alternate targets. The same target line_13: should be used for all observations in this test. line_15: The ordering of the modes (BIN, FIRM, PEAKUP AND PEAKDN) are not important and line_16: therefore have been grouped within 12H. line_18: All observations are SV Minimum Plan. ! question: 6 section: 1 line_1: This test is not stray-light sensitive. ! question: 7 section: 1 line_1: Data reduction will be performed at the STScI, and the line_2: analysis will be performed using FOS IDT computer facilities. line_3: Since this test is strictly a verification, no pipeline line_4: calibration data will be obtained. ! question: 10 section: 1 line_1: Data analysis, Research Assistant support, and funding line_2: will be provided under NASA'S FOS GTO contract(s). ! !end of general form text general_form_address: lname: FORD fname: HOLLAND category: PI inst: SPACE TELESCOPE SCIENCE INSTITUTE addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA ! lname: FORD fname: HOLLAND title: PI inst: SPACE TELESCOPE SCIENCE INSTITUTE addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA phone: 301-338-4700 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: LB227 name_2: GSC1255-744 descr_1: DA4 WHITE DWARF descr_2: PHOTOMETRIC STANDARD pos_1: RA=04H 09M 28.8S +/- 0.01S, pos_2: DEC=+17D 07' 54.4" +/- 0.2", pos_3: PLATE-ID=000O equinox: 2000 pm_or_par: Y pos_epoch_bj: J pos_epoch_yr: 2000.00 ra_pm_val: 0.007933 ra_pm_unct: 0.000333 dec_pm_val: -0.0250 dec_pm_unct: 0.0050 comment_1: THE GSSS NAME IS GIVEN fluxnum_1: 1 fluxval_1: V=15.35 +/- 0.05 fluxnum_2: 2 fluxval_2: B=15.46 +/- 0.05 ! targnum: 2 name_1: WD2058+342 name_2: GD392 descr_1: DC WHITE DWARF pos_1: RA=21H 00M 21.4S +/- 0.02S, pos_2: DEC=+34D 26' 19.4" +/- 0.3" equinox: 2000 pm_or_par: Y ra_pm_val: 0.007067 ra_pm_unct: 0.000333 dec_pm_val: 0.1060 dec_pm_unct: 0.0050 fluxnum_1: 1 fluxval_1: V=15.70 +/- 0.02 fluxnum_2: 2 fluxval_2: B=15.73 +/- 0.02 fluxnum_3: 3 fluxval_3: U=14.89 +/- 0.02 ! targnum: 3 name_1: NGC-188-136 descr_1: DC WHITE DWARF pos_1: RA=00H 23M 46.43S +/- 0.01S, pos_2: DEC=85D 00' 54.33" +/- 0.02" equinox: 1950 pm_or_par: Y pos_epoch_yr: 1950.00 ra_pm_val: 0.001320 ra_pm_unct: 0.000033 dec_pm_val: 0.0025 dec_pm_unct: 0.0009 comment_1: TARGETS 2 AND 3 ARE ALTERNATE comment_2: TARGETS TO LB227. fluxnum_1: 1 fluxval_1: V=15.28 fluxnum_2: 2 fluxval_2: B=15.43 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEF BIN targname: # config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 55S fluxnum_1: 1 priority: 1 req_1: SEQ 1-2 NO GAP; req_2: POS TARG 0.2,0.2; req_3: CYCLE 0/1-313; ! linenum: 2.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ/BINARY aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 1.4S fluxnum_1: 1 priority: 1 param_1: BRIGHT=330000, param_2: FAINT=275, req_1: ONBOARD ACQ FOR 3-4; ! linenum: 3.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 55S fluxnum_1: 1 priority: 1 ! linenum: 4.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: # sp_element: ^ num_exp: 1 time_per_exp: 55S priority: 1 comment_1: LINE 1-4 DEFINE THE BINARY comment_2: ACQUISITION MODE TEST ! linenum: 10.000 sequence_1: DEF FIRM targname: # config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 55S fluxnum_1: 1 priority: 1 req_1: SEQ 10-11 NO GAP; req_2: POS TARG 0.2,0.2; ! linenum: 11.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ/FIRMWARE aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 1.9S fluxnum_1: 1 priority: 1 param_1: MAP=BOTH, param_2: BRIGHT=330000, param_3: FAINT=280, req_1: ONBOARD ACQ FOR 12; ! linenum: 12.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 55S fluxnum_1: 1 priority: 1 comment_1: LINES 10-12 DEFINE THE comment_2: FIRMWARE ACQUISITION MODE TEST ! linenum: 20.000 sequence_1: DEF PEAKUP targname: # config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 55S fluxnum_1: 1 priority: 1 req_1: SEQ 20-21, 22-23.5 NO GAP; req_2: POS TARG 0.2,0.2; ! linenum: 21.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ/PEAK aperture: 1.0 sp_element: ^ num_exp: 1 time_per_exp: 0.13S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, param_2: SEARCH-SIZE=6, param_3: SCAN-STEP=0.7, req_1: ONBOARD ACQ FOR 22; ! linenum: 22.000 sequence_1: DEF PEAKUP targname: # config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 55S fluxnum_1: 1 priority: 1 ! linenum: 23.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ/PEAK aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: 0.5S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, param_2: SEARCH-SIZE=5, param_3: SCAN-STEP=0.2, req_1: ONBOARD ACQ FOR 23.5; ! linenum: 23.500 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 2.5S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, param_2: SEARCH-SIZE=5, param_3: SCAN-STEP=0.05, req_1: ONBOARD ACQ FOR 24; ! linenum: 24.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 55S fluxnum_1: 1 priority: 1 comment_1: LINES 20-24 DEFINE THE comment_2: PEAK-UP ACQUISITION MODE TEST ! linenum: 30.000 sequence_1: DEF PEAKDN targname: # config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 55S fluxnum_1: 1 priority: 1 req_1: SEQ 30-31 NO GAP; req_2: POS TARG 0.2,0.2; ! linenum: 31.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ/BINARY aperture: 4.3 sp_element: ^ num_exp: 1 time_per_exp: 1.4S fluxnum_1: 1 priority: 1 param_1: BRIGHT=330000, param_2: FAINT=275, req_1: ONBOARD ACQ FOR 32; ! linenum: 32.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ/PEAK aperture: 2.0-BAR sp_element: ^ num_exp: 1 time_per_exp: 0.5S fluxnum_1: 1 priority: 1 param_1: TYPE=DOWN, param_2: SEARCH-SIZE=11, param_3: SCAN-STEP=0.05 req_1: ONBOARD ACQ FOR 33; ! linenum: 33.000 sequence_1: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 400S fluxnum_1: 1 priority: 1 comment_1: LINES 30-33 DEFINE THE PEAKDOWN comment_2: ACQUISITION MODE TEST ! linenum: 100.000 sequence_1: USE BIN targname: NGC-188-136 config: FOS/BL aperture: 1.0 time_per_exp: X3.5 comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 101.000 sequence_1: USE FIRM targname: ^ config: ^ time_per_exp: X1.3 comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 102.000 sequence_1: USE PEAKUP targname: NGC-188-136 config: FOS/BL time_per_exp: X1.4 comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 103.000 sequence_1: USE PEAKDN targname: NGC-188-136 config: FOS/BL time_per_exp: X1.4 ! linenum: 104.000 sequence_1: USE BIN targname: NGC-188-136 config: FOS/RD aperture: 1.0 time_per_exp: X1.8 comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 105.000 sequence_1: USE FIRM targname: ^ config: ^ comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 106.000 sequence_1: USE PEAKUP targname: ^ config: ^ comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 107.000 sequence_1: USE PEAKDN targname: ^ config: ^ comment_1: WD2058+342 AND NGC-188 ARE comment_2: ALTERNATE TARGETS. THE SAME comment_3: TARGET SHOULD BE USED FOR ALL comment_4: OBSERVATIONS IN THIS TEST. comment_5: LINES 100-107 ARE VISIT 1. ! linenum: 200.000 sequence_1: USE BIN targname: NGC-188-136 config: FOS/BL aperture: 0.3 time_per_exp: X5.2 req_1: GROUP 200-203 WITHIN 12H; comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. comment_4: THIS OBSERVATIONS SHOULD INVOKE comment_5: A TALED ACQUISITION. AFTER 100 BY 8D comment_6: +/- 1D - USE SV T/L FOR SCHEDULE. ! linenum: 201.000 sequence_1: USE FIRM targname: ^ config: ^ time_per_exp: X1.3 comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 202.000 sequence_1: USE PEAKUP targname: ^ config: ^ time_per_exp: X1.4 comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 203.000 sequence_1: USE PEAKDN targname: ^ config: ^ time_per_exp: X1.4 comment_1: LINES 200-203 ARE VISIT 2, comment_2: SEQUENCE 1. ! linenum: 210.000 sequence_1: USE BIN targname: NGC-188-136 config: FOS/RD aperture: 0.3 time_per_exp: X3.7 req_1: GROUP 210-213 WITHIN 12 H; comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. comment_4: THIS OBSERVATIONS SHOULD INVOKE comment_5: A TALED ACQUISITION. AFTER 107 BY 8D comment_6: +/- 1D - USE SV T/L FOR SCHEDULE. ! linenum: 211.000 sequence_1: USE FIRM targname: NGC-188-136 config: FOS/RD comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 212.000 sequence_1: USE PEAKUP targname: ^ config: ^ comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 213.000 sequence_1: USE PEAKDN targname: ^ config: ^ comment_1: LINES 210-213 ARE comment_2: VISIT 2, SEQUENCE 2 ! linenum: 300.000 sequence_1: USE BIN targname: NGC-188-136 config: FOS/BL aperture: 1.0-PAIR-A time_per_exp: X2.3 req_1: GROUP 300-303 WITHIN 12H; comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. AFTER comment_4: 203 BY 8D +/- 1D - USE SV T/L FOR comment_5: SCHEDULE. ! linenum: 301.000 sequence_1: USE FIRM targname: ^ config: ^ time_per_exp: X1.3 comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 302.000 sequence_1: USE PEAKUP targname: ^ config: ^ time_per_exp: X1.4 comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 303.000 sequence_1: USE PEAKDN targname: ^ config: ^ time_per_exp: X1.4 comment_1: LINES 300-303 ARE VISIT 3, comment_2: SEQUENCE 1. ! linenum: 310.000 sequence_1: USE BIN targname: NGC-188-136 config: FOS/RD aperture: 1.0-PAIR-A time_per_exp: X1.7 req_1: GROUP 310-313 WITHIN 12 H; comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. AFTER comment_4: 213 BY 8D +/- 1D - USE SV T/L FOR comment_5: SCHEDULE. ! linenum: 311.000 sequence_1: USE FIRM targname: ^ config: ^ comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 312.000 sequence_1: USE PEAKUP targname: NGC-188-136 config: FOS/RD comment_1: HST SHOULD BE RETURNED TO comment_2: INITIAL, SLEW-TO POINTING comment_3: BEFORE GOING ON TO NEXT MODE. ! linenum: 313.000 sequence_1: USE PEAKDN targname: NGC-188-136 config: FOS/RD comment_1: LINES 310-313 ARE comment_2: VISIT 3, SEQUENCE 2 ! ! end of exposure logsheet ! No scan data records found