! File: 2148C.PROP ! Database: PEPDB ! Date: 17-FEB-1994:01:46:15 coverpage: title_1: BOOTSTRAP PHASE B/WAVE FRONT MEASUREMENT AND ADJUSTMENT proposal_for: OV/OTA pi_fname: W. pi_mi: L. pi_lname: BRADY pi_inst: PERKIN-ELMER pi_country: USA pi_phone: 203 797-5770 hours_pri: 8.25 num_pri: 1 fgs: X realtime: X ! end of coverpage abstract: line_1: This proposal will provide the data for, and make the adjustments to, the OTA line_2: secondary mirror to reduce the optical wave front error to approximately 1/20 line_3: of a wave. ! ! end of abstract general_form_proposers: lname: BROWN fname: R. inst: PERKIN-ELMER country: USA ! lname: FACEY fname: T. inst: PERKIN-ELMER country: USA ! lname: BRADY fname: W. mi: L. inst: PERKIN-ELMER country: USA ! lname: WINCHELL fname: D. inst: PERKIN-ELMER country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 0 line_1: The proposal will provide the data for, and make the adjustments to, the OTA line_2: secondary mirror to reduce the optical wave front error to approximately 1/20 line_3: of a wave. ! question: 3 section: 0 line_1: All the activities except the calibration mode require a star of magnitude 2 or line_2: brighter to be available at the appropriate WFS field of view. During the wave line_3: front measurements, Format FN is required for the 40 Hertz FGS data which is line_4: used to compensate the optical path length maps for jitter. line_6: The data taken will be processed to produce optical path difference maps and line_7: optical aberrtion coefficients. These provide the command data necessary to line_8: correct pointing errors and reduce optical aberrations. line_10: Real-time command will be required to set up the OCE parameters, to provide line_11: corrected pointing, and to move the secondary mirror actuators. Real-time line_12: telemetry will be required to allow the timely processing of the data. The line_13: process should be performed as rapidly as possible to minimize the effects of line_14: the graphite-epoxy desorption. line_16: The names of the pstol procs used in this test are listed, with the line_17: corresponding logsheet define lines also being indicated. line_18: "pactuator" - planning command group used wiht r/t uplink for actadj, line 13. line_19: "ocscalib" - line 17,18,19. line_20: "ocsmode2" - line 4,5,6. line_21: "ocsnorm" - line 1,2,3; line 7,8,9; line 10,11,12; line 14,15,16. ! question: 5 section: 0 line_1: Real-time telemetry for analysis and real-time commanding for OCE line_2: configuration, SM actuator commands, and real-time offset maneuvers. Format FN line_3: required for data takes. This activity must be performed outside the SAA. line_4: This activity must be performed after bootstrap PhaseA, (PEP ID 1534). This line_5: alignment must be accomplished before Mini-OFAD (PEP ID 1544) and interim line_6: FGS/FGS/FGS alignment (AD OTA F029) or before any further use of the optics is line_7: initiated. line_9: The adjustment of OCE parameteres will be done simultaneously with each line_10: interactive acquisition. ! question: 7 section: 0 line_1: The wave front sensor software resident in PASS will process the line_2: data for each wave front sensor observation. The results of this processing line_3: for all three wave front sensors will be processed by the actuator control line_4: software resident in PASS to evaluate the image quality and to generate the line_5: corresponding actuator command directives. Thee actuator command directives line_6: will be displayed for operator verification or alteration. ! question: 8 section: 0 line_1: The Astrometry Team will supply target stars and candidate guide stars. The line_2: guide stars must be selected from this candidate list. ! !end of general form text general_form_address: lname: BRADY fname: W. mi: L. category: PI inst: PERKIN-ELMER addr_1: 100 WOOSTER HGTS ROAD city: DANBURY, state: CT zip: 06810 country: USA phone: 203 797-5770 ! lname: WINCHELL fname: D. category: CON inst: PERKIN-ELMER addr_1: 100 WOOSTER HGTS ROAD city: DANBURY, state: CT zip: 06810 country: USA phone: 203 797-5462 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: IOTA-CARINA-270 descr_1: SECOND MAGNITUDE STAR pos_1: RA= 9H 15M 45.11S, pos_2: DEC= -59D 3' 53.7" equinox: 1950 plate_req: Y plate_avail: Y fluxval_1: V=2.0 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: CRSALGN1 targname: IOTA-CARINA-270 config: WFS opmode: NORMAL aperture: 1 num_exp: 1 time_per_exp: 5M priority: 1 param_1: FORMAT=FN, req_1: SPATIAL SCAN; req_2: RT ANALYSIS; req_3: CRIT OBS; req_4: POS TARG 3,3; ! linenum: 2.000 sequence_1: DEFINE sequence_2: CRSALGN2 targname: ^ config: ^ opmode: ^ aperture: 2 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ ! linenum: 3.000 sequence_1: DEFINE sequence_2: CRSALGN3 targname: ^ config: ^ opmode: ^ aperture: 3 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ comment_1: 6X6 ARCSEC SERPENTINE SCANS TO BE comment_2: USED. DOMINANT FGS ALWAYS CONTAINS comment_3: THE ACTIVE WFS. GUIDING FGSS IN FINE comment_4: LOCK WITH 2/3 APERTURE. AVOID SAA. comment_5: USE PSTOLS "OCENABLE", "CRSALGN" AND comment_6: "OCEOFF" FOR 1-3. ! linenum: 4.000 sequence_1: DEFINE sequence_2: CRSMAP1 targname: IOTA-CARINA-270 config: WFS opmode: MODE2 aperture: 1 num_exp: 1 time_per_exp: 7M priority: 1 param_1: FORMAT=FN, req_1: RT ANALYSIS; CRIT OBS; ! linenum: 5.000 sequence_1: DEFINE sequence_2: CRSMAP2 targname: ^ config: ^ opmode: ^ aperture: 2 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ ! linenum: 6.000 sequence_1: DEFINE sequence_2: CRSMAP3 targname: ^ config: ^ opmode: ^ aperture: 3 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ comment_1: DOMINANT FGS ALWAYS CONTAINS THE comment_2: ACTIVE WFS. GUIDING FGSS IN FINE comment_3: LOCK WITH 2/3 APERTURE. AVOID SAA. comment_4: USE PSTOLS "OCENABLE", "OCSMODEZ" AND comment_5: "OCEOFF" FOR 4-6. ! linenum: 7.000 sequence_1: DEFINE sequence_2: MAPA1 targname: IOTA-CARINA-270 config: WFS opmode: NORMAL aperture: 1 num_exp: 1 time_per_exp: 910S priority: 1 param_1: FORMAT=FN, req_1: RT ANALYSIS; CRIT OBS; ! linenum: 8.000 sequence_1: DEFINE sequence_2: MAPA2 targname: ^ config: ^ opmode: ^ aperture: 2 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ ! linenum: 9.000 sequence_1: DEFINE sequence_2: MAPA3 targname: ^ config: ^ opmode: ^ aperture: 3 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ comment_1: DOMINANT FGS ALWAYS CONTAINS THE comment_2: ACTIVE WFS. GUIDING FGSS IN FINE comment_3: LOCK WITH 2/3 APERTURE. AVOID SAA. comment_4: USE PSTOLS "OCENABLE", "OCSNORM" AND comment_5: "OCEOFF" FOR 7-9. ! linenum: 10.000 sequence_1: DEFINE sequence_2: MAPB1 targname: IOTA-CARINA-270 config: WFS opmode: NORMAL aperture: 1 num_exp: 1 time_per_exp: 910S priority: 1 param_1: FORMAT=FN, req_1: RT ANALYSIS; CRIT OBS; ! linenum: 11.000 sequence_1: DEFINE sequence_2: MAPB2 targname: ^ config: ^ opmode: ^ aperture: 2 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ ! linenum: 12.000 sequence_1: DEFINE sequence_2: MAPB3 targname: ^ config: ^ opmode: ^ aperture: 3 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ comment_1: DOMINANT FGS ALWAYS CONTAINS THE comment_2: ACTIVE WFS. GUIDING FGSS IN FINE LOCK comment_3: WITH CLEAR FILTER. AVOID SAA. USE comment_4: PSTOLS "OCENABLE", "OCSNORM" AND comment_5: "OCEOFF" FOR 10-12. ! linenum: 13.000 sequence_1: DEFINE sequence_2: ACTADJ targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 30M priority: 1 param_1: REALTIME=YES, param_2: CONTROL=GYRO, param_3: FORMAT=AN, comment_1: COMMANDING TO UPLINK SM ACTUATOR comment_2: ADJUSTMENT. USE PSTOL "ACTUATOR" FOR comment_3: 13. ! linenum: 14.000 sequence_1: DEFINE sequence_2: EXPUP1 targname: IOTA-CARINA-270 config: WFS opmode: NORMAL aperture: 1 num_exp: 1 time_per_exp: 910S priority: 1 param_1: FORMAT=FN, req_1: RT ANALYSIS; CRIT OBS; ! linenum: 15.000 sequence_1: DEFINE sequence_2: EXPUP2 targname: ^ config: ^ opmode: ^ aperture: 2 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ ! linenum: 16.000 sequence_1: DEFINE sequence_2: EXPUP3 targname: ^ config: ^ opmode: ^ aperture: 3 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ comment_1: DOMINANT FGS ALWAYS CONTAINS THE comment_2: ACTIVE WFS. GUIDING FGSS IN FINE comment_3: LOCK WITH 2/3 APERTURE. AVOID SAA. comment_4: USE PSTOLS "OCENABLE", "EXITPUPIL" comment_5: AND "OCEOFF" FOR 14-16. ! linenum: 17.000 sequence_1: DEFINE sequence_2: INTCAL targname: INTFLAT config: WFS opmode: CALIBRATE aperture: 1 num_exp: 1 time_per_exp: 910S priority: 1 param_1: FORMAT=FN, req_1: CRIT OBS / 17-19; req_2: SEQ 17-19 NO GAP; ! linenum: 18.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 2 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ ! linenum: 19.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: 3 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: ^ comment_1: AVOID SAA. USE PSTOLS "OCENABLE", comment_2: "OCSCALIB" AND "OCEOFF" FOR 17-19. ! linenum: 21.000 sequence_1: USE sequence_2: INTCAL req_1: RT ANALYSIS; req_2: SEQ 21-65.65; ! linenum: 22.000 sequence_1: USE sequence_2: CRSALGN1 req_1: SEQ 22-24 NO GAP; req_2: AFTER 21 BY 3H; req_3: INT ACQ FOR 26; req_4: DEC TIME 60M; ! linenum: 23.000 sequence_1: USE sequence_2: CRSALGN2 req_1: INT ACQ FOR 28; req_2: DEC TIME 60M; ! linenum: 24.000 sequence_1: USE sequence_2: CRSALGN3 req_1: INT ACQ FOR 30; req_2: DEC TIME 60M; ! linenum: 26.000 sequence_1: USE sequence_2: CRSMAP1 req_1: SAME POS FOR req_2: 26,32,39,45,50.45,53,60,65.60 AS 22; req_3: SEQ 26,28,30 NO GAP; req_4: INT ACQ FOR 32; ! linenum: 28.000 sequence_1: USE sequence_2: CRSMAP2 req_1: SAME POS FOR req_2: 28,34,41,47,50.47,55,62,65.62 AS 23; req_3: INT ACQ FOR 34; ! linenum: 30.000 sequence_1: USE sequence_2: CRSMAP3 req_1: SAME POS FOR req_2: 30,36,43,49,50.49,57,64,65.64 AS 24; req_3: INT ACQ FOR 36; ! linenum: 32.000 sequence_1: USE sequence_2: CRSMAP1 req_1: SEQ 32,34,36 NO GAP; req_2: INT ACQ FOR 39; req_3: AFTER 26 BY 4.5H +/-0.5H; req_4: AFTER 30 BY 3H +/-0.5H; ! linenum: 34.000 sequence_1: USE sequence_2: CRSMAP2 req_1: INT ACQ FOR 41; ! linenum: 36.000 sequence_1: USE sequence_2: CRSMAP3 req_1: INT ACQ FOR 43; ! linenum: 37.000 sequence_1: USE sequence_2: ACTADJ req_1: AFTER 32 BY 4.5H +/-0.5H; req_2: AFTER 36 BY 3H +/-0.5H; comment_1: REQUIRES PROCESSED DATA FROM 32,34, comment_2: AND 36. ! linenum: 39.000 sequence_1: USE sequence_2: EXPUP1 req_1: SEQ 39,41,43 NO GAP; req_2: INT ACQ FOR 45; ! linenum: 41.000 sequence_1: USE sequence_2: EXPUP2 req_1: INT ACQ FOR 47; ! linenum: 43.000 sequence_1: USE sequence_2: EXPUP3 req_1: INT ACQ FOR 49; ! linenum: 45.000 sequence_1: USE sequence_2: MAPA1 req_1: SEQ 45,47,49 NO GAP; req_2: INT ACQ FOR 50.45; req_3: AFTER 43 BY 3H +/-0.5H; ! linenum: 47.000 sequence_1: USE sequence_2: MAPA2 req_1: INT ACQ FOR 50.47; ! linenum: 49.000 sequence_1: USE sequence_2: MAPA3 req_1: INT ACQ FOR 50.49; ! linenum: 50.000 sequence_1: USE sequence_2: ACTADJ req_1: AFTER 45 BY 4.5H +/-0.5H; req_2: AFTER 49 BY 3H +/-0.5H; comment_1: REQUIRES PROCESSED DATA FROM 45,47 comment_2: AND 49. ! linenum: 50.450 sequence_1: USE sequence_2: MAPA1 req_1: SEQ 50.45,50.47,50.49 NO GAP; req_2: INT ACQ FOR 53; ! linenum: 50.470 sequence_1: USE sequence_2: MAPA2 req_1: INT ACQ FOR 55; ! linenum: 50.490 sequence_1: USE sequence_2: MAPA3 req_1: INT ACQ FOR 57; ! linenum: 50.500 sequence_1: USE sequence_2: ACTADJ req_1: AFTER 50.45 BY 4.5H +/-0.5H; req_2: AFTER 50.49 BY 3H +/-0.5H; comment_1: REQUIRES PROCESSED DATA FROM 50.45, comment_2: 50.47 AND 50.49. ! linenum: 51.000 sequence_1: USE sequence_2: INTCAL req_1: AFTER 50.50 BY 1H +/-0.5H; req_2: RT ANALYSIS; ! linenum: 53.000 sequence_1: USE sequence_2: MAPA1 req_1: SEQ 53, 55,57 NO GAP; req_2: INT ACQ FOR 60; ! linenum: 55.000 sequence_1: USE sequence_2: MAPA2 req_1: INT ACQ FOR 62; ! linenum: 57.000 sequence_1: USE sequence_2: MAPA3 req_1: INT ACQ FOR 64; ! linenum: 58.000 sequence_1: USE sequence_2: ACTADJ req_1: AFTER 57 BY 3H +/-0.5H; req_2: AFTER 53 BY 4.5H +/-0.5H; comment_1: REQUIRES PROCESSED DATA FROM 53, 55 comment_2: AND 57. ! linenum: 60.000 sequence_1: USE sequence_2: MAPB1 req_1: SEQ 60,62,64 NO GAP; req_2: INT ACQ FOR 65.60; ! linenum: 62.000 sequence_1: USE sequence_2: MAPB2 req_1: INT ACQ FOR 65.62; ! linenum: 64.000 sequence_1: USE sequence_2: MAPB3 req_1: INT ACQ FOR 65.64; ! linenum: 65.000 sequence_1: USE sequence_2: ACTADJ req_3: AFTER 60 BY 4.5H +/-0.5H; req_4: AFTER 64 BY 3H +/-0.5H; comment_1: REQUIRES PROCESSED DATA FROM 60,62 comment_2: AND 64. ! linenum: 65.600 sequence_1: USE sequence_2: MAPB1 req_1: SEQ 65.60, 65.62, 65.64 NO GAP; ! linenum: 65.620 sequence_1: USE MAPB2 ! linenum: 65.640 sequence_1: USE sequence_2: MAPB3 ! linenum: 65.650 sequence_1: USE sequence_2: ACTADJ req_1: AFTER 65.60 BY 4.5H +/-0.5H; req_2: AFTER 65.64 BY 3H +/-0.5H; comment_1: REQUIRES PROCESSED DATA FROM 65.60, comment_2: 65.62 AND 65.54. ! ! end of exposure logsheet scan_data: line_list: 1 fgs_scan: cont_dwell: C dwell_pnts: 0 dwell_secs: 0.00 scan_width: 6.0000 scan_length: 6.0000 sides_angle: 90.0000 number_lines: 13 scan_rate: 0.5000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.0000 wid_offset: 0.0000 ! line_list: 2 fgs_scan: cont_dwell: C dwell_pnts: 0 dwell_secs: 0.00 scan_width: 6.0000 scan_length: 6.0000 sides_angle: 90.0000 number_lines: 13 scan_rate: 0.5000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.0000 wid_offset: 0.0000 ! line_list: 3 fgs_scan: cont_dwell: C dwell_pnts: 0 dwell_secs: 0.00 scan_width: 6.0000 scan_length: 6.0000 sides_angle: 90.0000 number_lines: 13 scan_rate: 0.5000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.0000 wid_offset: 0.0000 ! ! end of scan data