!  File:  2143C.PROP
!  Database:  PEPDB
!  Date:  17-FEB-1994:01:35:06

coverpage:

  title_1:         SCIENCE INSTRUMENT FOCUS VERIFICATION TEST - SV_OLT_07
    proposal_for:  SV/OLT
    pi_fname:      CHRISTOPHER
    pi_lname:      BURROWS
    pi_inst:       ST SCI
    pi_country:    USA
    pi_phone:      (301)338-4913
    hours_pri:     8.50
    hours_par:     1.50
    num_pri:       7
    wf_pc:         Y
    fos:           Y
    hrs:           Y
    fgs:           Y
    realtime:      Y
! end of coverpage

abstract:

    line_1:        Verify that the best focus position of the secondary as derived
    line_2:        in the OCS Focus calibrations is appropriate
    line_3:        for the SIs. The test will check the focus for the HRS, FOS,
    line_4:        FGS and PC. In the event that the focus does not satisfy
    line_5:        SI requirements, a recommendation will be made for
    line_6:        optimization of the focus which represents a compromise for
    line_7:        all the SIs.

!
! end of abstract

general_form_proposers:

  lname:           STOCKMAN
    fname:         PETER
    inst:          ST SCI
    country:       USA

!

  lname:           GRIFFITHS
    fname:         RICHARD
    inst:          ST SCI
    country:       USA

!

  lname:           BURROWS
    fname:         CHRISTOPHER
    inst:          ST SCI
    country:       USA

!

  lname:           DOWNES
    fname:         RON
    inst:          APPLIED RESEARCH CO.
    country:       USA

!

  lname:           EBBETS
    fname:         DENNIS
    inst:          BALL AEROSPACE SYS DIVISION
    country:       USA

!

  lname:           LUPIE
    fname:         OLIVIA
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        The SI Focus Test will measure a point source as seen by the
    line_2:        SIs at 5 secondary mirror positions. At each secondary mirror
    line_3:        position, the following sequence of observations will be
    line_4:        made: a set of FOS spectra acquired during a step and dwell over the
    line_5:        0.1 arcsec aperture using a grating to get wavelength coverage,
    line_6:        a high resolution HRS focus diode map of the stellar image,
    line_7:        a PC image and FGS astrometric transfer
    line_8:        function measurements of the stars within the field.

!

  question:        3
    section:       1
    line_1:        This test requires placement of the secondary mirror at the
    line_2:        OTA best focus condition at the time of its execution.
    line_3:        Therefore, it must be scheduled within 24 hours of an
    line_4:        OCS focus calibration or adjustment. The first execution
    line_5:        must occur during early SV to uncover any potential focus
    line_6:        problems and repeated once (SV Delta plan) approximately
    line_7:        55-75 days later. In the event that the focus does not satisfy
    line_8:        SI requirements, a recommendation will be made for
    line_9:        optimization of the focus which represents a compromise for
    line_10:       all the SIs.

!

  question:        3
    section:       2
    line_1:        The 'conditional special requirement' is invoked for 3 situations:
    line_2:        - Because of the long test duration, the target with the
    line_3:        greatest visibility is required. Two targets and all exposure
    line_4:        lines have been included for later selection.
    line_5:        - The early SV scheduling of this test may precede
    line_6:        any use of onboard target acquisition software. The repeat of the
    line_7:        the test later in SV should make use of onboard software.
    line_8:        - A contingency procedure is included which obtains data at
    line_9:        nominal + 4 offset positions + 1 TBD-RT position.  This
    line_10:       procedure will only be used if insufficient data are
    line_11:       obtained from the basic observation.
    line_12:       The offset positions of the secondary mirror listed in
    line_13:       this proposal are defined in the same direction in which
    line_14:       the secondary actuators are last driven to establish the best focus
    line_15:       position.

!

  question:        4
    section:       1
    line_1:        Submitted as an Observatory Level Test

!

  question:        5
    section:       1
    line_1:        Test Requirements:
    line_2:        - Schedule test for early SV. This test is to be repeated as an SV Delta Plan
    line_3:        observation only if SI activities indicate a problem with focus.
    line_4:        - The Secondary Mirror MUST be placed in the position for
    line_5:        optimum focus as determined from the most recent OCS focus
    line_6:        calibration (via OV prop 2155 or SV prop 2784 depending on the time frame this
    line_7:        test is scheduled).  All secondary mirror offsets are given from optimum
    line_8:        focus fiducial. At the end of the test, the secondary mirror must be placed
    line_9:        back in the pre-OLT position.
    line_10:       - A 10 minute period has been adopted for REAL-TIME update
    line_11:       of the secondary mirror. A longer duration for this activity
    line_12:       will seriously impact test efficiency. Stored commanding
    line_13:       of the secondary motion, if possible, would significantly decrease
    line_14:       test duration and preclude any problems from lost TDRSS contact.

!

  question:        5
    section:       2
    line_1:        Test Requirements con't:
    line_2:        - The FOS and HRS observations (and corresponding PC
    line_3:        observations) are performed at the same defocus positions within
    line_4:        a relatively short time. This procedure minimizes the number
    line_5:        of times the secondary actuators are driven and also insures that
    line_6:        FOS and HRS observations are made at exactly the same defocus
    line_7:        positions and eliminates the question of the accuracy of
    line_8:        repositioning the secondary at a later time. These considerations
    line_9:        are felt to outweigh the inherent inefficiency of the procedure.
    line_10:       - A contingency sequence has been scheduled to accommodate
    line_11:       an unsuccessful sequence at a single secondary mirror position.
    line_12:       The secondary setting will be determined in real time.

!

  question:        5
    section:       3
    line_1:        Test Requirements Continued:
    line_2:        - Mode I TA and Initial FGS/SI Phase III alignments complete:
    line_3:        via Proposals FOS 1444 and HRS 1397.
    line_4:        - Raster and Step/Dwell OLT 2184 has been executed successfully.
    line_5:        - OCS Focus Calibration (OV 2155 or SV 2784) performed within 48 hours of this
    line_6:        test. - Do not schedule observations in SAA.

!

  question:        5
    section:       4
    line_1:        Lines 60-72 are the basic observation with the prime target.
    line_3:        Lines 160-162 are the contingency repeat using onboard
    line_4:        acqs with the prime target.
    line_6:        Lines 260-278 are the contingency repeat to obtain additional
    line_7:        additional data with the prime target.
    line_9:        Lines 360-372 are the basic observation with the alternate target.
    line_11:       Lines 460-472 are the contingency repeat using onboard
    line_12:       acqs with the alternate target.
    line_14:       Lines 560-578 are the contingency repeat to obtain additional
    line_15:       additional data with the alternate target.

!

  question:        7
    section:       1
    line_1:        Real Time Data Analysis Requirements:
    line_2:        INTERACTIVE ACQUISITIONS REQUIRED + REALTIME UPLINKS OF SM ADJUSTS
    line_3:        Offline Data Analysis Requirements:
    line_4:        FOS Data -
    line_5:        o Compute the flux at each offset, as a function of wavelength
    line_6:        o Compute the best focus as a function of wavelength
    line_7:        HRS Data -
    line_8:        o Coordinate with HRS IDT to extract PSF FWHM
    line_9:        o Compute the best focus
    line_10:       PC Data -
    line_11:       o Extract the PSF FWHM for each defocus position
    line_12:       o Compute the best focus
    line_13:       FGS Data -
    line_14:       o Compute the S-curve slope at the origin and modulation
    line_15:       o Deduce the sensitivity to each focus position and the OCS best
    line_16:       focus position
    line_17:       Adopted SI focus position offset:
    line_18:       o Coordinate data analysis results with FOS and HRS IDTs

!
!end of general form text

general_form_address:

  lname:           BURROWS
    fname:         CHRIS
    mi:            Y
    title:         DR.
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         301-338-4780
    from_date:     01-JAN-87
    to_date:       01-JAN-95

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        GRW+70D5824
    name_2:        GSC4405-1633
    descr_1:       BRIGHT UV STANDARD
    pos_1:         RA = 13H 38M 51.77S +/- 0.2S,
    pos_2:         DEC = +70D 17' 08.5" +/- 1",
    pos_3:         PLATE-ID=0001
    equinox:       2000
    comment_1:     PRIME TARGET
    comment_2:     GUIDE STAR COORDINATES GIVEN
    fluxnum_1:     1
    fluxval_1:     V = 12.87 +/- 0.2

!

    targnum:       2
    name_1:        GRW+70D5824-FLD
    descr_1:       PC FIELD WITH FOS
    pos_1:         RA = 13H 38M 51.77S +/- 10M,
    pos_2:         DEC = +70D 17' 08.5" +/- 10',
    pos_3:         PLATE-ID=0001
    equinox:       2000

!

    targnum:       3
    name_1:        GSC4619-662
    descr_1:       SECONDARY TARGET IN NGC188
    pos_1:         RA = 00H 40M 43.3S +/- 0.2S,
    pos_2:         DEC = +85D 10' 37.7" +/- 1"
    equinox:       2000
    comment_1:     SECONDARY TARGET
    comment_2:     GUIDE STAR COORDINATES GIVEN
    fluxnum_1:     1
    fluxval_1:     V = 13.00 +/- 0.3

!

    targnum:       4
    name_1:        GSC4619-662-FLD
    descr_1:       PC FIELD WITH FOS
    pos_1:         RA = 00H 40M 43.3S +/- 10M,
    pos_2:         DEC = +85D 10' 37.7" +/- 10',
    equinox:       2000

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEF
    sequence_2:    FOSINT
    targname:      GRW+70D5824
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  3.84S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    req_1:         INT ACQ FOR 2;
    req_2:         DEC TIME 5M;

!

    linenum:       2.000
    sequence_1:    ^
    targname:      GRW+70D5824
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  10S
    s_to_n:        25
    fluxnum_1:     1
    priority:      1
    param_1:       TYPE = UP,
    param_2:       SEARCH-SIZE=9,
    param_3:       SCAN-STEP=0.02,
    req_1:         ONBOARD ACQ FOR 3;

!

    linenum:       3.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ACCUM
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  10S
    s_to_n:        25
    fluxnum_1:     ^
    priority:      ^
    param_2:       STEP-PATT=SINGLE

!

    linenum:       4.000
    sequence_1:    ^
    sequence_2:    ^
    targname:      GRW+70D5824-FLD
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1M
    fluxnum_1:     1
    priority:      1
    param_1:       CR-SPLIT=NO,
    req_1:         SAME POS FOR 4 AS 3;

!

    linenum:       5.000
    sequence_1:    DEF
    sequence_2:    HRSINT
    targname:      GRW+70D5824
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  212S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=2,
    req_3:         INT ACQ FOR 6.00;
    req_4:         DEC TIME 5M;

!

    linenum:       6.000
    sequence_1:    ^
    targname:      ^
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  52S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       DELTA-X=1,
    param_2:       DELTA-Y=1,
    param_3:       NX=16,
    param_4:       NY=16,
    comment_1:     STEP-TIME=0.2

!

    linenum:       7.000
    sequence_1:    DEF
    sequence_2:    SMADJ
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  10 M
    priority:      1
    req_1:         REQ UPLINK;
    comment_1:     OFFSET SECONDARY MIRROR

!

    linenum:       8.000
    sequence_1:    DEF
    sequence_2:    FOSONB
    targname:      GRW+70D5824
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  0.3S
    priority:      1
    param_1:       SEARCH-SIZE=6,
    param_2:       SCAN-STEP=0.8,
    req_1:         ONBOARD ACQ FOR 9.0

!

    linenum:       9.000
    sequence_1:    DEF
    sequence_2:    FOSONB
    targname:      GRW+70D5824
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  0.3S
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2
    req_1:         ONBOARD ACQ FOR 10.0

!

    linenum:       10.000
    sequence_1:    DEF
    sequence_2:    FOSONB
    targname:      GRW+70D5824
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  0.6S
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.05,
    req_1:         ONBOARD ACQ FOR 10.5;

!

    linenum:       10.500
    sequence_1:    DEF
    sequence_2:    FOSONB
    targname:      GRW+70D5824
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  3S
    priority:      1
    param_1:       SEARCH-SIZE=3,
    param_2:       SCAN-STEP=0.02,
    req_1:         ONBOARD ACQ FOR 11;

!

    linenum:       11.000
    sequence_1:    DEF
    sequence_2:    FOSONB
    targname:      GRW+70D5824
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  10S
    priority:      1
    param_1:       SEARCH-SIZE=9,
    param_2:       SCAN-STEP=0.02,
    req_1:         ONBOARD ACQ FOR 12.0

!

    linenum:       12.000
    sequence_1:    DEF
    sequence_2:    FOSONB
    targname:      GRW+70D5824
    config:        FOS/RD
    opmode:        ACCUM
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  10S
    priority:      1
    param_1:       STEP-PATT=SINGLE

!

    linenum:       13.000
    sequence_1:    ^
    sequence_2:    ^
    targname:      GRW+70D5824-FLD
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1M
    fluxnum_1:     1
    priority:      1
    param_1:       CR-SPLIT=NO,
    req_1:         SAME POS FOR 13 AS 12;

!

    linenum:       14.000
    sequence_1:    DEF
    sequence_2:    HRSONB
    targname:      GRW+70D5824
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  58S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    req_3:         ONBOARD ACQ FOR 15;

!

    linenum:       15.000
    sequence_1:    ^
    targname:      ^
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  52S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       DELTA-X=1,
    param_2:       DELTA-Y=1,
    param_3:       NX=16,
    param_4:       NY=16,
    comment_1:     STEP-TIME=0.2

!

    linenum:       21.000
    sequence_1:    DEF
    sequence_2:    FOSINT-2
    targname:      GSC4619-662
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  3.84S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    req_1:         INT ACQ FOR 22;
    req_2:         DEC TIME 5M;

!

    linenum:       22.000
    sequence_1:    ^
    targname:      GSC4619-662
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  10S
    s_to_n:        25
    fluxnum_1:     1
    priority:      1
    param_1:       TYPE = UP,
    param_2:       SEARCH-SIZE=9,
    param_3:       SCAN-STEP=0.02,
    req_1:         ONBOARD ACQ FOR 23;

!

    linenum:       23.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ACCUM
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  10S
    s_to_n:        25
    fluxnum_1:     ^
    priority:      ^
    param_2:       STEP-PATT=SINGLE

!

    linenum:       24.000
    sequence_1:    ^
    sequence_2:    ^
    targname:      GSC4619-662-FLD
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1M
    fluxnum_1:     1
    priority:      1
    param_1:       CR-SPLIT=NO,
    req_1:         SAME POS FOR 24 AS 23;

!

    linenum:       25.000
    sequence_1:    DEF
    sequence_2:    HRSINT-2
    targname:      GSC4619-662
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  53S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=2,
    req_3:         INT ACQ FOR 26.00;
    req_4:         DEC TIME 5M;

!

    linenum:       26.000
    sequence_1:    ^
    targname:      ^
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  52S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       DELTA-X=1,
    param_2:       DELTA-Y=1,
    param_3:       NX=16,
    param_4:       NY=16,
    comment_1:     STEP-TIME=0.2

!

    linenum:       28.000
    sequence_1:    DEF
    sequence_2:    FOSONB-2
    targname:      GSC4619-662
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  0.3S
    priority:      1
    param_1:       SEARCH-SIZE=6,
    param_2:       SCAN-STEP=0.8,
    req_1:         ONBOARD ACQ FOR 29.0

!

    linenum:       29.000
    sequence_1:    DEF
    sequence_2:    FOSONB-2
    targname:      GSC4619-662
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  0.3S
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 30.0

!

    linenum:       30.000
    sequence_1:    DEF
    sequence_2:    FOSONB-2
    targname:      GSC4619-662
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  0.6S
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.05,
    req_1:         ONBOARD ACQ FOR 30.5;

!

    linenum:       30.500
    sequence_1:    DEF
    sequence_2:    FOSONB-2
    targname:      GSC4619-662
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  3S
    priority:      1
    param_1:       SEARCH-SIZE=3,
    param_2:       SCAN-STEP=0.02,
    req_1:         ONBOARD ACQ FOR 31.0;

!

    linenum:       31.000
    sequence_1:    DEF
    sequence_2:    FOSONB-2
    targname:      GSC4619-662
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  10S
    priority:      1
    param_1:       SEARCH-SIZE=9,
    param_2:       SCAN-STEP=0.02,
    req_1:         ONBOARD ACQ FOR 32.0

!

    linenum:       32.000
    sequence_1:    DEF
    sequence_2:    FOSONB-2
    targname:      GSC4619-662
    config:        FOS/RD
    opmode:        ACCUM
    aperture:      0.1-PAIR-A
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  10S
    priority:      1
    param_1:       STEP-PATT=SINGLE

!

    linenum:       33.000
    sequence_1:    ^
    sequence_2:    ^
    targname:      GSC4619-662-FLD
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1M
    fluxnum_1:     1
    priority:      1
    param_1:       CR-SPLIT=NO,
    req_1:         SAME POS FOR 33 AS 32;

!

    linenum:       34.000
    sequence_1:    DEF
    sequence_2:    HRSONB-2
    targname:      GSC4619-662
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  58S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    req_3:         ONBOARD ACQ FOR 35;

!

    linenum:       35.000
    sequence_1:    ^
    targname:      ^
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  52S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       DELTA-X=1,
    param_2:       DELTA-Y=1,
    param_3:       NX=16,
    param_4:       NY=16,
    comment_1:     STEP-TIME=0.2

!

    linenum:       60.000
    sequence_1:    USE SMADJ
    req_1:         SELECT 1 OF 60-72 OR 360-372;
    req_2:         COND IF PRIME TARGET AVAILABLE / 60-72;
    comment_1:     PLACE SECONDARY MIRROR AT OCS BEST
    comment_2:     FOCUS POSITION 0.0MM

!

    linenum:       61.000
    sequence_1:    USE
    sequence_2:    FOSINT
    req_1:         SEQ 60-72 NO GAP;
    req_4:         CYCLE 0 / 60-568;
    comment_1:     LINES 60-72 ARE PRIME TARGET
    comment_2:     BASIC OBSERVATION

!

    linenum:       62.000
    sequence_1:    USE
    sequence_2:    HRSINT

!

    linenum:       63.000
    sequence_1:    USE
    sequence_2:    SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY +0.80MM

!

    linenum:       64.000
    sequence_1:    USE HRSINT

!

    linenum:       65.000
    sequence_1:    USE FOSINT

!

    linenum:       66.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY -0.80MM

!

    linenum:       67.000
    sequence_1:    USE FOSINT

!

    linenum:       68.000
    sequence_1:    USE HRSINT

!

    linenum:       69.000
    sequence_1:    USE SMADJ
    comment_1:     CONTINGENCY: OFFSET SECONDARY FROM
    comment_2:     BEST FOCUS - DETERMINE IN REAL TIME

!

    linenum:       70.000
    sequence_1:    USE HRSINT

!

    linenum:       71.000
    sequence_1:    USE FOSINT

!

    linenum:       72.000
    sequence_1:    USE SMADJ
    comment_1:     RESET SM BACK TO NOMINAL POSITION

!

    linenum:       160.000
    sequence_1:    USE SMADJ
    req_1:         SELECT 1 OF 160-172 OR 460-472;
    req_2:         COND IF PRIME TARGET AVAILABLE AND
    req_3:         REPEAT NEEDED / 160-172;
    comment_1:     PLACE SECONDARY MIRROR AT OCS BEST
    comment_2:     FOCUS POSITION 0.0MM
    comment_3:     LINES 160-172 ARE PRIME TARGET WITH
    comment_4:     ONBOARD ACQS

!

    linenum:       161.000
    sequence_1:    USE
    sequence_2:    FOSONB
    req_1:         SEQ 160-172 NO GAP;

!

    linenum:       162.000
    sequence_1:    USE
    sequence_2:    HRSONB

!

    linenum:       163.000
    sequence_1:    USE
    sequence_2:    SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY +0.80MM

!

    linenum:       164.000
    sequence_1:    USE HRSONB

!

    linenum:       165.000
    sequence_1:    USE FOSONB

!

    linenum:       166.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY -0.80MM

!

    linenum:       167.000
    sequence_1:    USE FOSONB

!

    linenum:       168.000
    sequence_1:    USE HRSONB

!

    linenum:       169.000
    sequence_1:    USE SMADJ
    comment_1:     CONTINGENCY: OFFSET SECONDARY FROM
    comment_2:     BEST FOCUS - DETERMINE IN REAL TIME

!

    linenum:       170.000
    sequence_1:    USE HRSONB

!

    linenum:       171.000
    sequence_1:    USE FOSONB

!

    linenum:       172.000
    sequence_1:    USE SMADJ
    comment_1:     RESET SM BACK TO NOMINAL POSITION

!

    linenum:       260.000
    sequence_1:    USE SMADJ
    req_1:         SELECT 1 OF 260-278 OR 560-578;
    req_2:         COND IF PRIME TARGET AVAILABLE AND
    req_3:         MORE DATA NEEDED / 260-278;
    comment_1:     PLACE SECONDARY MIRROR AT OCS BEST
    comment_2:     FOCUS POSITION 0.0MM

!

    linenum:       261.000
    sequence_1:    USE
    sequence_2:    FOSINT
    req_1:         SEQ 260-278 NO GAP;
    comment_1:     LINES 260-278 ARE PRIME TARGET
    comment_2:     CONTINGENCY OBSERVATION WITH ADDED
    comment_3:     SM POSITIONS

!

    linenum:       262.000
    sequence_1:    USE
    sequence_2:    HRSINT

!

    linenum:       263.000
    sequence_1:    USE
    sequence_2:    SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY +0.40MM

!

    linenum:       264.000
    sequence_1:    USE HRSINT

!

    linenum:       265.000
    sequence_1:    USE FOSINT

!

    linenum:       266.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY +0.80MM

!

    linenum:       267.000
    sequence_1:    USE FOSINT

!

    linenum:       268.000
    sequence_1:    USE HRSINT

!

    linenum:       269.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY -0.80MM

!

    linenum:       270.000
    sequence_1:    USE HRSINT

!

    linenum:       271.000
    sequence_1:    USE FOSINT

!

    linenum:       272.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY -0.40MM

!

    linenum:       273.000
    sequence_1:    USE FOSINT

!

    linenum:       274.000
    sequence_1:    USE HRSINT

!

    linenum:       275.000
    sequence_1:    USE SMADJ
    comment_1:     CONTINGENCY: OFFSET SECONDARY FROM
    comment_2:     BEST FOCUS - DETERMINE IN REAL TIME

!

    linenum:       276.000
    sequence_1:    USE HRSINT

!

    linenum:       277.000
    sequence_1:    USE FOSINT

!

    linenum:       278.000
    sequence_1:    USE SMADJ
    comment_1:     RESET SM BACK TO NOMINAL POSITION

!

    linenum:       360.000
    sequence_1:    USE SMADJ
    req_2:         COND IF PRIME TARG NOT AVAIL / 360-372;
    comment_1:     PLACE SECONDARY MIRROR AT OCS BEST
    comment_2:     FOCUS POSITION 0.0MM

!

    linenum:       361.000
    sequence_1:    USE
    sequence_2:    FOSINT-2
    req_1:         SEQ 360-372 NO GAP;
    comment_1:     LINES 360-372 ARE ALTERNATE TARGET
    comment_2:     BASIC OBSERVATION

!

    linenum:       362.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       363.000
    sequence_1:    USE
    sequence_2:    SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY +0.80MM

!

    linenum:       364.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       365.000
    sequence_1:    USE
    sequence_2:    FOSINT-2

!

    linenum:       366.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY -0.80MM

!

    linenum:       367.000
    sequence_1:    USE
    sequence_2:    FOSINT-2

!

    linenum:       368.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       369.000
    sequence_1:    USE SMADJ
    comment_1:     CONTINGENCY: OFFSET SECONDARY FROM
    comment_2:     BEST FOCUS - DETERMINE IN REAL TIME

!

    linenum:       370.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       371.000
    sequence_1:    USE
    sequence_2:    FOSINT-2

!

    linenum:       372.000
    sequence_1:    USE SMADJ
    comment_1:     RESET SM BACK TO NOMINAL POSITION

!

    linenum:       460.000
    sequence_1:    USE SMADJ
    req_2:         COND IF PRIME TARGET NOT AVAILABLE AND
    req_3:         REPEAT NEEDED / 460-472;
    comment_1:     PLACE SECONDARY MIRROR AT OCS BEST
    comment_2:     FOCUS POSITION 0.0MM
    comment_3:     LINES 460-472 ARE ALTERNATE TARGET
    comment_4:     WITH ONBOARD ACQS

!

    linenum:       461.000
    sequence_1:    USE
    sequence_2:    FOSONB-2
    req_1:         SEQ 460-472 NO GAP;

!

    linenum:       462.000
    sequence_1:    USE
    sequence_2:    HRSONB-2

!

    linenum:       463.000
    sequence_1:    USE
    sequence_2:    SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY +0.80MM

!

    linenum:       464.000
    sequence_1:    USE
    sequence_2:    HRSONB-2

!

    linenum:       465.000
    sequence_1:    USE
    sequence_2:    FOSONB-2

!

    linenum:       466.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY -0.80MM

!

    linenum:       467.000
    sequence_1:    USE
    sequence_2:    FOSONB-2

!

    linenum:       468.000
    sequence_1:    USE
    sequence_2:    HRSONB-2

!

    linenum:       469.000
    sequence_1:    USE SMADJ
    comment_1:     CONTINGENCY: OFFSET SECONDARY FROM
    comment_2:     BEST FOCUS - DETERMINE IN REAL TIME

!

    linenum:       470.000
    sequence_1:    USE
    sequence_2:    HRSONB-2

!

    linenum:       471.000
    sequence_1:    USE
    sequence_2:    FOSONB-2

!

    linenum:       472.000
    sequence_1:    USE SMADJ
    comment_1:     RESET SM BACK TO NOMINAL POSITION

!

    linenum:       560.000
    sequence_1:    USE SMADJ
    req_2:         COND IF PRIME TARGET NOT AVAILABLE AND
    req_3:         MORE DATA NEEDED / 560-578;
    comment_1:     PLACE SECONDARY MIRROR AT OCS BEST
    comment_2:     FOCUS POSITION 0.0MM

!

    linenum:       561.000
    sequence_1:    USE
    sequence_2:    FOSINT-2
    req_1:         SEQ 560-578 NO GAP;
    comment_1:     LINES 560-578 ARE ALTERATE TARGET
    comment_2:     CONTINGENCY OBSERVATION WITH ADDED
    comment_3:     SM POSITIONS

!

    linenum:       562.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       563.000
    sequence_1:    USE
    sequence_2:    SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY +0.40MM

!

    linenum:       564.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       565.000
    sequence_1:    USE
    sequence_2:    FOSINT-2

!

    linenum:       566.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY +0.80MM

!

    linenum:       567.000
    sequence_1:    USE
    sequence_2:    FOSINT-2

!

    linenum:       568.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       569.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY -0.80MM

!

    linenum:       570.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       571.000
    sequence_1:    USE
    sequence_2:    FOSINT-2

!

    linenum:       572.000
    sequence_1:    USE SMADJ
    comment_1:     OFFSET SECONDARY MIRROR FROM BEST
    comment_2:     FOCUS BY -0.40MM

!

    linenum:       573.000
    sequence_1:    USE
    sequence_2:    FOSINT-2

!

    linenum:       574.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       575.000
    sequence_1:    USE SMADJ
    comment_1:     CONTINGENCY: OFFSET SECONDARY FROM
    comment_2:     BEST FOCUS - DETERMINE IN REAL TIME

!

    linenum:       576.000
    sequence_1:    USE
    sequence_2:    HRSINT-2

!

    linenum:       577.000
    sequence_1:    USE
    sequence_2:    FOSINT-2

!

    linenum:       578.000
    sequence_1:    USE SMADJ
    comment_1:     RESET SM BACK TO NOMINAL POSITION

!
! end of exposure logsheet

! No scan data records found