!  File:  2112C.PROP
!  Database:  PEPDB
!  Date:  17-FEB-1994:01:04:37

coverpage:

  title_1:         HRS006/007, ALIVENESS TESTS (SIDE 1 AND 2)
    proposal_for:  OV/HRS
    pi_fname:      JOHN
    pi_lname:      TROELTZSCH
    pi_inst:       BALL AEROSPACE SYSTEMS DIV.
    pi_country:    USA
    pi_phone:      (303) 939-5781
    keywords_1:    HRS, ORBITAL VERIFICATION
    hours_pri:     1.00
    hrs:           X
    realtime:      X
    pi_position:   OV TEST ENGINEER
! end of coverpage

abstract:

    line_1:        These tests verify the basic operational health of the following HRS side 1 and
    line_2:        side 2 components:  thermal control; detector electronics; carrousel; digicon
    line_3:        window heater; shutter; lamps; science data interface; test pulser;
    line_4:        integration; and, reset capability.

!
! end of abstract

general_form_proposers:

  lname:           KRUEGER
    fname:         VERN
    inst:          GODDARD SPACE FLIGHT CENTER
    country:       USA

!

  lname:           GARNER
    fname:         HARRY
    inst:          BALL AEROSPACE SYSTEMS DIV.
    country:       USA

!

  lname:           EBBETS
    fname:         DENNIS
    inst:          BALL AEROSPACE SYSTEMS DIV.
    country:       USA

!

  lname:           WILLIAMS
    fname:         BRUCE
    inst:          BALL AEROSPACE SYSTEMS DIV.
    country:       USA

!

  lname:           TROELTZSCH
    fname:         JOHN
    inst:          BALL AEROSPACE SYSTEMS DIV.
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        HRS OV Objectives:
    line_2:        1.  Verify basic hardware aliveness of the HRS.

!

  question:        3
    section:       1
    line_1:        This test is performed after HRS003 and HRS005, starting with the HRS in the
    line_2:        OV-unique thermal HOLD mode.  SI C&DH must be operational.  High voltage must
    line_3:        not be turned on.  The test requires 4 kbps science data link support and
    line_4:        engineering telemetry to be available.
    line_6:        The test will be executed by loading 4 RTCSs (ZMAPWR, ZMAMECH, ZMETHRES,
    line_7:        and ZMADATA) and executing them via ground command in realtime.
    line_8:        The following 18 functional steps, in sequence, are required for the test of
    line_9:        each side:  (1) turn on LV, wait 2 minutes for telemetry to become valid;  (2)
    line_10:       cycle thermal backup control;  (3) turn on detector electronics;  (4) test
    line_11:       carrousel operation;  (5) cycle digicon window heater;  (6) cycle shutter; (7)
    line_12:       cycle 2 spectral cal and 1 flat field lamps;  (8) load center deflections and
    line_13:       anti-coincidence thresholds;  (9) set tweak coil current;  (10) configure SD
    line_14:       I/F and SDF for 4 kbps science data transfer;  (11) enable group 17 test
    line_15:       pulser;  (12) test integrate function;  (13) disable test pulser;  (14) disable
    line_16:       SD I/F;  (15) test ICS reset capability;  (16) test DCS rest capability;  (17)
    line_17:       turn off detector electronics;  (18) turn off LV.
    line_18:       The foregoing steps are then repeated for side 2.
    line_20:       This is an internal test and does not require any special pointing of the
    line_21:       telescope; no target list is required.

!

  question:        5
    section:       1
    line_1:        Test requires realtime commanding, and realtime 4 kbps science data and
    line_2:        engineering telemetry.
    line_4:        Since this activity is part of the inital activation of the HRS, it
    line_5:        must not be done in parallel with any other SI activities.
    line_7:        PLEASE SCHEDULE THIS TEST AFTER HRS003 AND HRS006

!

  question:        7
    section:       1
    line_1:        Engineering telemetry monitoring to verify aliveness of side 1 and side 2
    line_2:        components.  The OSS at the SSC is required to verify the content of the
    line_3:        science data.
    line_5:        No updates to the ground or flight databases are required.

!

  question:        10
    section:       1
    line_1:        1.  Test design support
    line_2:        2.  Test execution support team
    line_3:        3.  Data analysis facilities
    line_4:        4.  Data analysis personnel

!
!end of general form text

general_form_address:

  lname:           KRUEGER
    fname:         VERN
    category:      CON
    inst:          GODDARD SPACE FLIGHT CENTER
    addr_1:        CODE 683
    city:          GREENBELT
    state:         MD
    zip:           20771
    country:       USA
    phone:         301-286-5004

!

  lname:           TROELTZSCH
    fname:         JOHN
    category:      PI
    inst:          BALL AEROSPACE SYSTEMS DIV.
    addr_1:        P. O. BOX 1062
    city:          BOULDER
    state:         CO
    zip:           80306
    country:       USA
    phone:         303-939-4816

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       10.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    param_1:       REALTIME=YES,
    param_2:       FORMAT=AN,
    req_1:         NON-INT;

!

    linenum:       20.000
    targname:      DARK
    config:        HRS
    opmode:        ENGINEERING
    sp_element:    SAFE1
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       TYPE=ALIVE,
    param_2:       HIGH-VOLTAGE=OFF,
    req_1:         PAR WITH 10;
    req_2:         RT ANALYSIS;
    comment_1:     EXECUTE FOR SIDE 1: ZMAPWR, ZMAMECH,
    comment_2:     ZMETHRESH, ZMADATA.
    comment_3:     GATHER SCIENCE DATA FOR ZMADATA.

!

    linenum:       50.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    param_1:       REALTIME=YES,
    param_2:       FORMAT=AN,
    req_1:         AFTER 20 BY 6.0H +/- 5.5H;
    req_2:         NON-INT;

!

    linenum:       60.000
    targname:      DARK
    config:        HRS
    opmode:        ENGINEERING
    sp_element:    SAFE2
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       TYPE=ALIVE,
    param_2:       HIGH-VOLTAGE=OFF,
    req_1:         PAR WITH 50;
    req_2:         RT ANALYSIS;
    comment_1:     EXECUTE FOR SIDE 1: ZMAPWR, ZMAMECH,
    comment_2:     ZMETHRESH, ZMADATA.
    comment_3:     GATHER SCIENCE DATA FOR ZMADATA.

!
! end of exposure logsheet

! No scan data records found