! File: 1516C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:21:34:05 coverpage: title_1: FOC RELATIVE CALIBRATION proposal_for: SV/FOC pi_title: DR. pi_fname: FRANCESCO pi_lname: PARESCE pi_inst: SPACE TELESCOPE SCIENCE INSTITUTE pi_country: USA foc: Y ! end of coverpage abstract: line_1: The relative pixel to pixel response of the FOC over the entire field of view line_2: will be measured using the onboard LEDs. line_6: Observations should be performed in parallel mode, using internal sources. line_8: This program is directly related to FOC Relative DQE line_9: Calibration (Prop 1515) ! ! end of abstract general_form_proposers: lname: PARESCE fname: FRANCESCO title: DR. inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: The LED exposures will allow us to map the relative DQE over the face of the line_2: individual detectors at the pixel level. The data will be used to produce line_3: "master" DQE files in CDBS for use by the RSDP pipeline processing. ! question: 5 section: 1 line_1: SV Prerequisites: line_2: FOC-i1 - STABILITY TEST (prop 1505) line_3: FOC-i2 - DETECTOR FOCUS (prop 1506) line_5: THIS IS AN SV MINIMUM PLAN ACTIVITY ! !end of general form text general_form_address: lname: PARESCE fname: FRANCESCO title: DR. category: PI inst: SPACE TELESCOPE SCIENCE INSTITUTE addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA phone: 301-338-4823 telex: 684-9101-STSCI ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 targname: INTFLAT config: FOC/48 opmode: RESEAU aperture: 512X1024 num_exp: 10 time_per_exp: 1000S fluxnum_1: 1 priority: 9 param_1: PIXEL=50X25, param_2: LED=BLUE, param_3: LED-STEP=0, req_2: CYCLE 0 / 1-6; ! linenum: 2.000 targname: INTFLAT config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: PIXEL=50X25, param_2: LED=GREEN-2, param_3: LED-STEP=4 ! linenum: 3.000 targname: INTFLAT config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: PIXEL=50X25, param_2: LED=RED-2, param_3: LED-STEP=24 comment_1: LINES 1-3 ARE INTERNAL CALIBRATIONS comment_2: OF THE F/48 RELAY (FOC-I9B). comment_3: THE LEDCAL LEVELS ARE TO BE SET comment_4: CORRESPONDING TO 0.2 comment_5: COUNTS/SEC/PIXEL. ! linenum: 4.000 targname: INTFLAT config: FOC/96 opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: PIXEL=50X25, param_2: LED=BLUE, param_3: LED-STEP=0, ! linenum: 5.000 targname: INTFLAT config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: PIXEL=50X25, param_2: LED=GREEN-2, param_3: LED-STEP=12, ! linenum: 6.000 targname: INTFLAT config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: PIXEL=50X25, param_2: LED=RED-2, param_3: LED-STEP=64, comment_1: LINES 4-6 ARE INTERNAL CALIBRATIONS comment_2: OF THE F/96 RELAY (FOC-I9A). comment_3: LEDCAL LEVELS ARE TO BE SET TO GIVE comment_4: 0.2 COUNTS/SEC/PIXEL. ! ! end of exposure logsheet ! No scan data records found