! File: 1477C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:19:56:46 coverpage: title_1: WF/PC SOFA MAP TEST proposal_for: OV/WFC pi_fname: JAMES pi_mi: A. pi_lname: WESTPHAL pi_inst: CALTECH pi_country: USA ! end of coverpage abstract: line_1: These are a series of engineering tests to determine the home position of each line_2: of the 12 filter wheels in the WF/PC and that each is functioning correctly. line_3: As these are engineering tests requiring no exposures, no targets are necessary. line_4: This test must be performed after the science data and telemetry line_5: verification test, and before any other OV WF/PC tests. ! ! end of abstract general_form_proposers: lname: DANIELSON fname: G. mi: E. inst: CALTECH country: USA ! lname: WESTPHAL fname: JAMES mi: A. inst: CALTECH country: USA ! lname: GUNN fname: JAMES mi: E. inst: PRINCETON UNIVERSITY country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 0 line_1: These on-orbit tests establish the home position of each line_2: filter wheel in WF/PC and that each is functioning correctly. ! question: 3 section: 1 line_1: MECH power will be turned on and it will be verified that all filter wheels are line_2: in the home position. Each of the 12 filter wheels will be consecutively line_3: stepped out and then cleared, following a prescribed sequence. Upon line_4: completion, it will be verified that all filter wheels are again in the home line_5: position. No actual exposures will be taken during the test. The test is line_6: concluded with the initiation of a WF bias frame. line_10: WF/PC in hold mode. line_11: NO TEC power is to be initiated. ! question: 5 section: 1 line_1: This test must be completed before any further use of the WFC and the PC. line_2: This is an engineering test and involves no Science Data. line_3: Therefore, it can be carried out in parallel with any Normal line_4: HST activity. line_7: SI C&DH operational format AN. line_8: Prefer an uninterrupted interval of 1 hour duration for this test. ! !end of general form text general_form_address: lname: DANIELSON fname: G. mi: E. category: CON inst: CALTECH addr_1: DIVISION OF GEOLOGICAL & PLANETARY SCIENCES city: PASADENA state: CA zip: 91125 country: USA phone: (818) 356-6861 ! lname: WESTPHAL fname: JAMES mi: A. category: PI inst: CALTECH addr_1: DIVISION OF GEOLOGICAL & PLANETARY SCIENCE city: PASADENA state: CA zip: 91125 country: USA phone: (818) 356-4900 ! lname: GUNN fname: JAMES mi: E. category: CON inst: PRINCETON UNIVERSITY addr_1: ASTROPHYSICAL SCIENCE addr_2: PEYTON HALL city: PRINCETON state: NJ zip: 08540 country: USA phone: (609) 452-3802 ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 0.500 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 60M priority: 1 param_1: FORMAT=AN ! linenum: 1.000 targname: NULL config: WFC opmode: IMAGE aperture: ALL sp_element: F673N num_exp: 0 time_per_exp: 0S priority: 1 param_1: READ=NO, param_2: CLEAR=YES comment_1: MUST BE DONE PRIOR TO ANY WF/PC comment_2: INSTRUMENT ACTIVITY. ALL DATA IN comment_3: ENGINEERING STREAM. EACH STEP comment_4: INVOLVES COMMANDING THE SOFA TO PUT comment_5: OUT A FILTER AND THEN COMMANDING IT comment_6: TO BE HOMED; WHEEL ONE (1A). ! linenum: 2.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: F336W num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ param_2: ^ req_1: AFTER 1 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL TWO (2B) ! linenum: 3.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: POL120 num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ param_2: ^ req_1: AFTER 2 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL THREE (3C) ! linenum: 4.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: F284W num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ param_2: ^ req_1: AFTER 3 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL FOUR (4D) ! linenum: 5.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: F569W num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ param_2: ^ req_1: AFTER 4 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL FIVE (5A) ! linenum: 6.000 targname: NULL config: WFC opmode: IMAGE aperture: ALL sp_element: F658N num_exp: 1 time_per_exp: 0S priority: 1 param_1: READ=NO, param_2: CLEAR=YES req_1: AFTER 5 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL SIX (6B) ! linenum: 7.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: F437N num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ param_2: ^ req_1: AFTER 6 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL SEVEN (7C) ! linenum: 8.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: F492M num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ param_2: ^ req_1: AFTER 7 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL EIGHT (8D) ! linenum: 9.000 targname: NULL config: WFC opmode: IMAGE aperture: ALL sp_element: F547M num_exp: 1 time_per_exp: 0S priority: 1 param_1: READ=NO, param_2: CLEAR=YES req_1: AFTER 8 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL NINE (9A) ! linenum: 10.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: F875M num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ param_2: ^ req_1: AFTER 9 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL TEN (10B) ! linenum: 11.000 targname: NULL config: WFC opmode: IMAGE aperture: ALL sp_element: F487N num_exp: 1 time_per_exp: 0S priority: 1 param_1: READ=NO, param_2: CLEAR=YES req_1: AFTER 10 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL ELEVEN comment_2: (11C) ! linenum: 12.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: F889N num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ param_2: ^ req_1: AFTER 11 BY 6M +/- 1M comment_1: THIS SEQUENCE IS FOR WHEEL 12 (12D) comment_2: CLEAR COMMAND HOMES ALL FILTERS AFTER comment_3: EACH LINE. THE OBJECT IS TO MAP WHERE comment_4: THE WHEEL HOMES. THIS TEST MAY BE comment_5: CARRIED OUT IN PARALLEL WITH ANY comment_6: NORMAL ACTIVITY ON HST. ! ! end of exposure logsheet ! No scan data records found