! File: 1459C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:19:25:56 coverpage: title_1: HRS PULSE HEIGHT ANALYSIS (PHA) proposal_for: OV/HRS pi_fname: JOHN pi_lname: TROELTZSCH pi_inst: BALL AEROSPACE SYSTEMS DIV. pi_country: USA pi_phone: 303-939-5781 keywords_1: HRS, ORBITAL VERIFICATION hours_par: 0.67 hrs: X pi_position: OV TEST ENGINEER ! end of coverpage abstract: line_1: This test performs a pulse height analysis to determine individual diode line_2: response as a function of threshold for each HRS detector. Based on this line_3: evaluation new thresholds may be determined for optimal HRS operation, and the line_4: ZCTFLIT1, 2 command blocks will be updated accordingly. line_6: This test will be repeated twice in SV. During the first repeat line_7: an ion test will be included to verify HRS detector ion counts. ! ! end of abstract general_form_proposers: lname: KRUEGER fname: VERN inst: GODDARD SPACE FLIGHT CENTER country: USA ! lname: GARNER fname: HARRY inst: BALL AEROSPACE SYSTEMS DIV. country: USA ! lname: EBBETS fname: DENNIS inst: BALL AEROSPACE SYSTEMS DIV. country: USA ! lname: WILLIAMS fname: BRUCE inst: BALL AEROSPACE SYSTEMS DIV. country: USA ! lname: TROELTZSCH fname: JOHN inst: BALL AEROSPACE SYSTEMS DIV. country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: HRS OV Objectives: line_2: 1. Verify threshold electronics. line_3: 2. Determine the optimal HRS thresholds. ! question: 3 section: 1 line_1: The HRS DEBs are turned on, and the ZCOPHA1 command block is executed line_2: to generate the required science data. The default thresholds are then line_3: reloaded and verified. line_5: The above steps are repeated for side 2. line_7: During the first repeat of this test in SV an ion count will be performed line_8: in addition to the PHA. The same command block (ZCOPHA) is used for line_9: both the PHA and the ion count. ! question: 5 section: 1 line_1: This test should be scheduled to immediately follow the first HRS Standard High line_2: Voltage Turn On in OV. It should be run well outside the SAA. The test should line_3: be repeated twice in SV. The ion test (exp. lines 3 and 4) should be scheduled line_4: with the first repeat of the PHA (lines 1 and 2). line_6: Prerequisites: line_7: 1. Proposal 1457, HRS Standard High Voltage Turn On must have been successfully line_8: completed. ! question: 5 section: 2 line_1: This is an internal test and does not require any special pointing of the line_2: telescope. This test does not require the HRS to be the prime SI. line_4: There is no target list with this proposal. ! question: 7 section: 1 line_1: 1. The science data will be reduced offline to generate new thresholds. line_3: The load threshold command blocks in project database will be updated with the line_4: new thresholds. ! question: 10 section: 1 line_1: 1. Test design support line_2: 2. Test execution support team line_3: 3. Data analysis facilities line_4: 4. Data analysis personnel ! !end of general form text general_form_address: lname: KRUEGER fname: VERN category: CON inst: GODDARD SPACE FLIGHT CENTER addr_1: GSFC CODE 683 city: GREENBELT state: MD zip: 20771 country: USA phone: 301-286-5004 ! lname: TROELTZSCH fname: JOHN category: PI inst: BALL AEROSPACE SYSTEMS DIV. addr_1: P.O. BOX 1062 city: BOULDER state: CO zip: 80306 country: USA phone: 303-939-4816 ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: USE sequence_2: PHA-1 comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR ZCOPHA-SIDE 1. ! linenum: 2.000 sequence_1: USE sequence_2: PHA-2 req_1: AFTER 1.0 BY 12H comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR ZCOPHA-SIDE 2. ! linenum: 3.000 sequence_1: USE sequence_2: THRSH-1 req_1: AFTER 1.0 BY 14D comment_1: LOAD AND VERIFY THRESHOLDS comment_2: FOR SIDE 1. ! linenum: 4.000 sequence_1: USE sequence_2: THRSH-2 req_1: AFTER 3.0 BY 12H comment_1: LOAD AND VERIFY THRESHOLDS comment_2: FOR SIDE 2. ! linenum: 5.000 sequence_1: USE sequence_2: PHA-1 req_1: AFTER 1.0 BY 60D+/-5D comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR ZCOPHA-SIDE 1. ! linenum: 6.000 sequence_1: USE sequence_2: PHA-2 req_1: AFTER 5.0 BY 12H comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR ZCOPHA-SIDE 2. ! linenum: 7.000 sequence_1: USE sequence_2: ION-1 req_1: AFTER 1.0 BY 71D+/-5D comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR SIDE 1 ION TEST USING ZCOPHA. ! linenum: 8.000 sequence_1: USE sequence_2: ION-2 req_1: AFTER 7.0 BY 12H; comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR SIDE 2 ION TEST USING ZCOPHA. ! linenum: 9.000 sequence_1: USE sequence_2: THRSH-1 req_1: AFTER 5.0 BY 14D comment_1: LOAD AND VERIFY THRESHOLDS comment_2: FOR SIDE 1. ! linenum: 10.000 sequence_1: USE sequence_2: THRSH-2 req_1: AFTER 9.0 BY 12H comment_1: LOAD AND VERIFY THRESHOLDS comment_2: FOR SIDE 2. ! linenum: 11.000 sequence_1: USE sequence_2: PHA-1 req_1: AFTER 5.0 BY 60D+/-5D comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR ZCOPHA-SIDE 1. ! linenum: 12.000 sequence_1: USE sequence_2: PHA-2 req_1: AFTER 11.0 BY 12H comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR ZCOPHA-SIDE 2. ! linenum: 13.000 sequence_1: USE sequence_2: ION-1 req_1: AFTER 7.0 BY 60D+/-5D comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR SIDE 1 ION TEST USING ZCOPHA. ! linenum: 14.000 sequence_1: USE sequence_2: ION-2 req_1: AFTER 13.0 BY 12H; comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR SIDE 2 ION TEST USING ZCOPHA. ! linenum: 15.000 sequence_1: USE sequence_2: THRSH-1 req_1: AFTER 11.0 BY 14D comment_1: LOAD AND VERIFY THRESHOLDS comment_2: FOR SIDE 1. ! linenum: 16.000 sequence_1: USE sequence_2: THRSH-2 req_1: AFTER 15.0 BY 12H comment_1: LOAD AND VERIFY THRESHOLDS comment_2: FOR SIDE 2. ! linenum: 100.000 sequence_1: DEFINE sequence_2: PHA-1 targname: INTFLAT config: HRS opmode: PULSE-HEIGHT aperture: NONE sp_element: SAFE1 num_exp: 1 time_per_exp: 200S priority: 1 comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR ZCOPHA-SIDE 1. ZBEG=30,ZEND=129, comment_3: ZINC=1,ZINTTIME=2.0S ! linenum: 102.000 sequence_1: DEFINE sequence_2: PHA-2 targname: INTFLAT config: HRS opmode: PULSE-HEIGHT aperture: NONE sp_element: SAFE2 num_exp: 1 time_per_exp: 600S priority: 1 comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR ZCOPHA-SIDE 2. ZBEG=30,ZEND=129, comment_3: ZINC=1,ZINTTIME=6.0S ! linenum: 103.000 sequence_1: DEFINE sequence_2: ION-1 targname: ION config: HRS opmode: PULSE-HEIGHT aperture: NONE sp_element: SAFE1 num_exp: 1 time_per_exp: 1275S priority: 1 param_1: BEGIN=57, comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR SIDE 1 ION TEST USING ZCOPHA. comment_3: ZBEG=57,ZEND=255,ZINC=2,ZINTTIME= comment_4: 12.75S ! linenum: 104.000 sequence_1: DEFINE sequence_2: ION-2 targname: ION config: HRS opmode: PULSE-HEIGHT aperture: NONE sp_element: SAFE2 num_exp: 1 time_per_exp: 1275S priority: 1 param_1: BEGIN=57, comment_1: GATHER SCIENCE AND ENGINEERING DATA comment_2: FOR SIDE 2 ION TEST USING ZCOPHA. comment_3: ZBEG=57,ZEND=255,ZINC=2,ZINTTIME= comment_4: 12.75S ! linenum: 105.000 sequence_1: DEFINE sequence_2: THRSH-1 targname: DARK config: HRS opmode: THRESHOLD sp_element: SAFE1 num_exp: 1 time_per_exp: 14M priority: 1 param_1: FUNCTION=BOTH comment_1: LOAD AND EXECUTE ZMETHRES (LOAD AND comment_2: VERIFY) SIDE 1. ! linenum: 106.000 sequence_1: DEFINE sequence_2: THRSH-2 targname: DARK config: HRS opmode: THRESHOLD sp_element: SAFE2 num_exp: 1 time_per_exp: 14M priority: 1 param_1: FUNCTION=BOTH comment_1: LOAD AND EXECUTE ZMETHRES (LOAD AND comment_2: VERIFY) SIDE 2. ! ! end of exposure logsheet ! No scan data records found