! File: 1415C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:18:17:36 coverpage: title_1: DETERMINE MOVING TARGET PLATE SCALE AST-SV-4 proposal_for: SV/AST pi_fname: WILLIAM pi_mi: H. pi_lname: JEFFERYS pi_inst: UNIVERSITY OF TEXAS pi_country: USA pi_phone: 512-471-4461 X455 time_crit: X pi_position: PROFESSOR ! end of coverpage abstract: line_1: The goal of this procedure is to measure the plate scale of line_2: the FGSs to 0.002 arcsec over the length of the FGSFOV by line_3: measuring a minor planet as it traverses the FGSFOV. line_4: The derived numbers will go into the Calibration ST ScI line_5: database for SDAS reductions of individual FGS astrometric line_6: observations. A composite number, as yet TDB, will go into line_7: the Project database to replace the preliminary value of line_8: the OTA Plate Scale derived from the mini-OFAD. The minimum line_9: SV plan calls for FGS1 and FGS3 (bay numbers) to be calibrated line_10: absolutely using the moving target. ! ! end of abstract general_form_proposers: lname: fname: AST SCIENCE TEAM ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: The conversion from instrumental units to arcseconds on the line_2: sky is commonly referred to as "plate scale." The FGSs are line_3: supposed to have the capability to measure relative positions line_4: within the FGSFOV to an accuracy of +/-0.002 arcseconds. line_5: This is an order of magnitude better than ground-based line_6: observations, and so the plate scale must be determined line_7: in a manner other than measuring a "known" field. The short line_8: arc ephemeris motion of a well-studied solar system object line_9: such as an asteroid can be known to an order of magnitude line_10: higher accuracy. Therefore, the plan to calibrate the FGS line_11: scales is to measure a minor planet as it moves across the line_12: FGSFOVs, and determine the plate scales of each FGS in turn. ! question: 3 section: 1 line_1: Combined AST and STScI SVMP: MTPlate Scale in FGS1 and 3. line_2: Set all FGS filters to PUPIL for Astrometry measurements. line_3: 1) Point HST so that the moving target is near one extreme line_4: of the FGS FOV for FGS 1 or 3 and the spacecraft is oriented line_5: so that the direction of motion of the moving target is line_6: approximately along the long dimension of the FOV. line_7: 2) Acquire Guide Stars in FGS 1 and 3. line_8: 3) Acquire the moving target in POS mode. line_9: 4) Take data for 3 minutes. line_10: 5) Measure a reference star for 1 minute. line_11: 6) Interleave reference star and moving target measures. line_12: 7) Repeat steps 1-6 for another rotation of ref stars. line_13: 8) Repeat steps 1-7 for the other FGS (1 or 3). line_14: If the clear aperture in FGS 1 or 3 is deemed suitable for line_15: POS mode, then the PUPIL will be changed to F583W in line_16: that FGS. The decision will be made after 5POL in Nov. line_17: 1991. ! question: 3 section: 2 line_1: All repeats of a moving target as it traverses a given FGS FOV line_2: should be made with the same POS and ORIENT. line_3: Other observations may be made between these settings. ! question: 5 section: 1 line_1: Moving target in a particular orientation with requirements line_2: on the position of measurement within the FGSFOVs for all line_3: FGSs requires time criticality. line_4: The BEFORE and AFTER Special Requirements are needed line_5: for moving target/reference field observations. line_12: Contact Paul Hemenway (512) 471 3431 for more information. ! question: 5 section: 2 line_1: ! question: 6 section: 1 line_1: The rate of motion of the minor planet must be determined from line_2: ground calibrations. The correction from center of light to line_3: center of mass must be accounted for, either by making the line_4: measurements at the same point in the light curve (determined line_5: by concurrent ground-based photometry) or by undertaking a line_6: program to determine the aspect of the minor planet as a line_7: function of time during the observations, or both. ! question: 7 section: 1 line_1: AST software will be used to derive the positions of the minor line_2: planet as a function of time. These will be compared with line_3: the expected ephemeris motion derived at the University of line_4: Texas, corrected for the usual known observational line_5: effects. The undistorted plate scale will then be derived for line_6: each FGS with an accuracy of 0.002 arcseconds over a major line_7: portion of the FGSFOVs. These numbers, their attendant errors, line_8: and the covariance matrix of the solution will be entered in line_9: the Project Data Base and the STScI data base to be used line_10: with SDAS analysis. ! question: 8 section: 1 line_1: All FGS numbers refer to BAY numbers. Ground-based plates line_2: will be required for an ephemeris update continuing after line_3: the observations. ! question: 10 section: 1 line_1: AST software be available in Austin. Ephemeris programs are also line_2: be available in Austin. Personnel representing the AST line_3: will be available at STScI during the measurements to aid in line_4: the reduction and analysis. ! !end of general form text general_form_address: lname: JEFFERYS fname: WILLIAM mi: H. category: PI inst: UNIVERSITY OF TEXAS country: USA ! ! end of general_form_address records fixed_targets: targnum: 10 name_1: MPPOINT1 descr_1: POINTING FOR TRIBERGA619 pos_1: RA = 165.5946768D +/- .0008D, pos_2: DEC = -5.1490157D+/-.0008D equinox: 2000 ! targnum: 20 name_1: MPPOINT3 descr_1: POINTING FOR TRIBERGA619 pos_1: RA = 165.4390460D +/- .0008D, pos_2: DEC = -5.4973615D +/- .0008D equinox: 2000 ! targnum: 69 name_1: SCALE619-3-REF descr_1: REFERENCE STAR FOR PLATE SCALE pos_1: RA = 165.516D +/- .0008D, pos_2: DEC = -5.31654D+/-.0008D equinox: 2000 fluxnum_1: 1 fluxval_1: V = 13.45+/-1 ! targnum: 163 name_1: SCALE619-1-REF descr_1: REFERENCE STAR FOR PLATE SCALE pos_1: RA = 165.54813D +/- .0008D, pos_2: DEC = -5.33955D+/-.0008D equinox: 2000 fluxnum_1: 1 fluxval_1: V = 13.08+/-1 ! targnum: 205 name_1: SCALE619-2-REF descr_1: REFERENCE STAR FOR PLATE SCALE pos_1: RA = 165.48535D +/- .0008D, pos_2: DEC = -5.30048D+/-.0008D equinox: 2000 fluxnum_1: 1 fluxval_1: V = 11.34+/-1 ! targnum: 245 name_1: SCALE619-5-REF descr_1: REFERENCE STAR FOR PLATE SCALE pos_1: RA = 165.5218D +/- .0008D, pos_2: DEC = -5.34754D+/-.0008D equinox: 2000 fluxnum_1: 1 fluxval_1: V = 12.82+/-1 ! targnum: 313 name_1: SCALE619-4-REF descr_1: REFERENCE STAR FOR PLATE SCALE pos_1: RA = 165.43937D +/- .0008D, pos_2: DEC = -5.27414D+/-.0008D equinox: 2000 fluxnum_1: 1 fluxval_1: V = 13.22+/-1 ! ! end of fixed targets solar_system_targets: targnum: 300 name_1: TRIBERGA619 descr_1: ASTEROID 619 TRIBERGA lev1_1: TYPE = ASTEROID, lev1_2: M=83.69805, E=.0744877, lev1_3: I=13.75778, A=2.5202024, lev1_4: O=187.00056, W=177.19803, lev1_5: EQUINOX=B1950, lev1_6: EPOCH=24-MAY-91:00:00:00. comment_1: TARGET DIAMETER ABOUT 25 MAS comment_2: PREDICTIONS GOOD TO ABOUT 1.0 ARCSE comment_3: FROM REVISED ORBIT. WND1 = comment_4: 03-FEB-92:00:45 TO 05-FEB-92:02:00 comment_5: REMOVED DUE TO VALIDATIO BUG. fluxnum_1: 1 fluxval_1: V = 14.7 +/- .1 fluxnum_2: 2 fluxval_2: B = 9.95 +/- 1. ! ! end of solar system targets ! No generic target records found exposure_logsheet: linenum: 101.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: MPPOINT1 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 0S priority: 1 req_1: SAME POS FOR 102-111 AS 101; req_2: SEQ 101-111 NO GAP; req_3: ORIENT -52.06D +/- 0.3D; comment_1: WRITTEN WITH PUPIL FILTER POSITION. comment_2: MAY CHOOSE FULL APERTURE (F583W) comment_3: BASED ON FINAL SECONDARY comment_4: MIRROR POSITION. ! linenum: 102.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: TRIBERGA619 config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 103.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: SCALE619-1-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 104.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: SCALE619-2-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 105.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: TRIBERGA619 config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 106.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: SCALE619-3-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 107.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: SCALE619-4-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 108.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: TRIBERGA619 config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 109.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: SCALE619-5-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 110.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: SCALE619-1-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 111.000 sequence_1: DEFINE sequence_2: MPSCALE11 targname: TRIBERGA619 config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 201.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: MPPOINT1 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 0S priority: 1 req_1: SAME POS FOR 202-211 AS 201; req_2: SEQ 201-211 NO GAP; req_3: ORIENT -52.06D +/- 0.3D; comment_1: WRITTEN WITH PUPIL FILTER POSITION. comment_2: MAY CHOOSE FULL APERTURE (F583W) comment_3: BASED ON FINAL SECONDARY comment_4: MIRROR POSITION. ! linenum: 202.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: TRIBERGA619 config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 203.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: SCALE619-3-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 204.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: SCALE619-4-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 205.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: TRIBERGA619 config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 206.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: SCALE619-5-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 207.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: SCALE619-1-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 208.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: TRIBERGA619 config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 209.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: SCALE619-2-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 210.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: SCALE619-3-REF config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 211.000 sequence_1: DEFINE sequence_2: MPSCALE12 targname: TRIBERGA619 config: FGS opmode: POS aperture: 1 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 301.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: MPPOINT3 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 0S priority: 1 req_1: SAME POS FOR 302-311 AS 301; req_2: SEQ 301-311 NO GAP; req_3: ORIENT -52.06D +/- 0.3D; comment_1: WRITTEN WITH PUPIL FILTER POSITION. comment_2: MAY CHOOSE FULL APERTURE (F583W) comment_3: BASED ON FINAL SECONDARY comment_4: MIRROR POSITION. ! linenum: 302.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: TRIBERGA619 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 303.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: SCALE619-1-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 304.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: SCALE619-2-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 305.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: TRIBERGA619 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 306.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: SCALE619-3-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 307.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: SCALE619-4-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 308.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: TRIBERGA619 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 309.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: SCALE619-5-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 310.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: SCALE619-1-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 311.000 sequence_1: DEFINE sequence_2: MPSCALE31 targname: TRIBERGA619 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 401.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: MPPOINT3 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 0S priority: 1 req_1: SAME POS FOR 402-411 AS 401; req_2: SEQ 401-411 NO GAP; req_3: ORIENT -52.06D +/- 0.3D; comment_1: WRITTEN WITH PUPIL FILTER POSITION. comment_2: MAY CHOOSE FULL APERTURE (F583W) comment_3: BASED ON FINAL SECONDARY comment_4: MIRROR POSITION. ! linenum: 402.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: TRIBERGA619 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 403.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: SCALE619-3-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 404.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: SCALE619-4-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 405.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: TRIBERGA619 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 406.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: SCALE619-5-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 407.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: SCALE619-1-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 408.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: TRIBERGA619 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 409.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: SCALE619-2-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 410.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: SCALE619-3-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_5: NULL=NO, ! linenum: 411.000 sequence_1: DEFINE sequence_2: MPSCALE32 targname: TRIBERGA619 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 180S s_to_n: 10 fluxnum_1: 1 priority: 1 param_1: DATA-RATE=32, param_2: ACQ-MODE=SEARCH, param_3: ACQ-DIST=15, param_4: FES-TIME=0.1, param_5: NULL=NO, ! linenum: 501.000 sequence_1: USE sequence_2: MPSCALE31 req_1: AFTER 3-FEB-92:00:45 BY 45M +/- 45M; req_2: CYCLE 1 / 501-721; ! linenum: 502.000 sequence_1: USE sequence_2: MPSCALE31 req_1: AFTER 3-FEB-92:05:00 BY 45M +/- 45M; ! linenum: 503.000 sequence_1: USE sequence_2: MPSCALE11 req_1: AFTER 3-FEB-92:08:20 BY 45M +/- 45M; req_2: SEQ 503-505 NO GAP; ! linenum: 505.000 sequence_1: USE sequence_2: MPSCALE31 ! linenum: 513.000 sequence_1: USE sequence_2: MPSCALE11 req_1: AFTER 3-FEB-92:14:20 BY 45M +/- 45M; ! linenum: 533.000 sequence_1: USE sequence_2: MPSCALE11 req_1: AFTER 4-FEB-92:02:20 BY 45M +/- 45M; req_2: SEQ 533-535 NO GAP; ! linenum: 535.000 sequence_1: USE sequence_2: MPSCALE31 ! linenum: 555.000 sequence_1: USE sequence_2: MPSCALE31 req_1: AFTER 4-FEB-92:14:20 BY 45M +/- 45M; ! linenum: 563.000 sequence_1: USE sequence_2: MPSCALE11 req_1: AFTER 4-FEB-92:20:20 BY 45M +/- 45M; ! linenum: 571.000 sequence_1: USE sequence_2: MPSCALE11 req_1: BEFORE 5-FEB-92:00:30 BY 45M +/- 45M; comment_1: THE TIME IS EGRESS MINUS 90M. ! linenum: 710.000 sequence_1: USE sequence_2: MPSCALE12 req_1: AFTER 3-FEB-92:20:20 BY 45M +/- 45M; req_2: COND IF ADDITIONAL MSMTS NEEDED; req_3: SEQ 710-711 NO GAP; comment_1: LINES 710-721 ARE PROVIDED IN THE comment_2: EVENT THAT ONE OF THE OTHER TIME comment_3: RANGES DOES NOT WORK OUT. ! linenum: 711.000 sequence_1: USE sequence_2: MPSCALE32 req_1: COND IF ADDITIONAL MSMTS NEEDED; ! linenum: 720.000 sequence_1: USE sequence_2: MPSCALE12 req_1: AFTER 4-FEB-92:08:20 BY 45M +/- 45M; req_2: COND IF ADDITIONAL MSMTS NEEDED; req_3: SEQ 720-721 NO GAP; ! linenum: 721.000 sequence_1: USE sequence_2: MPSCALE32 req_1: COND IF ADDITIONAL MSMTS NEEDED; ! ! end of exposure logsheet ! No scan data records found