!  File:  1381C.PROP
!  Database:  PEPDB
!  Date:  16-FEB-1994:16:46:42

coverpage:

  title_1:         HSP TARGET ACQUISITION TEST HSP-02
    proposal_for:  SV/HSP
    pi_fname:      ROBERT
    pi_mi:         C.
    pi_lname:      BLESS
    pi_inst:       UNIVERSITY OF WISCONSIN
    pi_country:    USA
    pi_phone:      608-262-1715
    hours_pri:     1.63
    num_pri:       1
! end of coverpage

abstract:

    line_1:        This proposal outlines the test procedure for verifying HSP Mode II target
    line_2:        acquisition (on-board) capability for each of the four IDTs on the HSP.
    line_3:        Using a stellar source in the CVZ, each IDT will have the target placed in its
    line_4:        finding aperture where a small area scan is taken to confirm the location of
    line_5:        the star; additional pointing commands will then position the source in a
    line_6:        selected aperture. This test verifies the interaction of HSP with the ST
    line_7:        Pointing Control System (PCS) and serves to check the ST-HSP mechanical
    line_8:        alignment.
    line_9:        Revision History:       Updated: 3/15/89 S. Laurent
    line_10:       changed exposure times, etc. Nelson 4/29/89
    line_11:       RPSS Version 6.2 local

!
! end of abstract

general_form_proposers:

  lname:           BLESS
    fname:         R.
    mi:            C.
    inst:          UNIVERSITY OF WISCONSIN
    country:       USA

!

  lname:           SLOVAK
    fname:         M.
    mi:            H.
    inst:          UNIVERSITY OF WISCONSIN
    country:       USA

!

  lname:           DOLAN
    fname:         J.
    mi:            F.
    inst:          GODDARD SPACE FLIGHT CENTER
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:
    line_2:        The proposed observations will begin with the first IDT configured in
    line_3:        the digital, single aperture mode. After ST is commanded to place the target
    line_4:        in the 10.0 arcsec finding aperture (6.0 arcsec for POL(IDT#1)),
    line_5:        a 20 x 20 acquisition area scan with 0.5 arcsec steps is performed,
    line_6:        integrating for 1 millisec at each point. The HSP flight software will
    line_7:        determine the target centroid, calculate the vectors to position the star
    line_8:        in a particular aperture, and pass the appropriate commands to the SSM.
    line_9:        After the maneuver, a 10 x 10 area scan with 0.1 arcsec steps is performed,
    line_10:       integrating for 10 millisec at each point, and the area data stored. This
    line_11:       sequence is done for a total of five apertures (in addition to the finding
    line_12:       aperture) for each of the four IDTs.  A PMT(DET#5) exposure is also taken
    line_13:       while using the VIS(IDT#3) IDT.
    line_14:       The apertures to be tested for each of the IDTs are:
    line_15:       1) POL(IDT#1): F327M-POLO, F216M-POL90, F277M-POL45, F237M-POL135 and F160LP.
    line_16:       2) UV1(IDT#2): F248M-B, F184W-A, F135W-B, F152M-A AND F278N-B (0.4")
    line_17:       3) VIS(IDT#3): F620W-B,F450W-A,F184W-B,F355M-B,F551W-B (0.4") and PMT.
    line_18:       1) UV2(IDT#4): F145M-B, F278N-A, F179M-B, F184W-B AND F152M-A (0.4")
    line_20:       The order of using the IDTs is POL(IDT#1), UV1(IDT#2), VIS(IDT#3), UV2(IDT#4).

!

  question:        3
    section:       2
    line_1:        ST ScI: Default parameters for all ONBOARD ACQ are
    line_2:        20 x 20 steps
    line_3:        0.5 arcsec steps
    line_4:        10 ms integration times
    line_5:        acquire brightest object in the field

!

  question:        5
    section:       1
    line_1:
    line_3:        The proposed test will require approximately thirty (30) seconds to complete
    line_4:        per IDT. Once the target has been acquired in the finding aperture of the IDT
    line_5:        in question, the test should not be interrrupted until the target has been
    line_6:        located in the fifth offset aperture. At that time, the test may be
    line_7:        interrupted if necessary and the remaining IDTs tested when scheduling permits.
    line_8:        The OV HSP MSC tests Phases I - III (1380,1503,1504) are prerequisities for
    line_9:        this test. Pointing Stability:  Coarse track is understood to have less than 19
    line_10:       marcsec stability.  That is satisfactory for all observations in the
    line_11:       10" and 1.0" IDT apertures and the PMT.  HSP requires fine lock for all
    line_12:       observations in the 0.4" apertures.

!

  question:        7
    section:       1
    line_1:
    line_3:        The data reduction and analysis consists of examining the telescope/IDT
    line_4:        raster images around each aperture position to locate the target. An
    line_5:        intensity-weighted centroiding algorithm will be employed to derive the exact
    line_6:        deflection coordinates for the target in each of the apertures.
    line_8:        These aperture positions will be compared to the positions derived for the
    line_9:        same apertures from the previous tests (HSP-01a - 01c) in order to check for any
    line_10:       aperture offsets or stretching between apertures or differences in the derived
    line_11:       centers of the apertures as determined from a point source compared to an
    line_12:       extended source.

!

  question:        8
    section:       1
    line_1:
    line_5:        No need for supporting or coordinate observations with other facilities or
    line_6:        additional special requirements are anticipated.

!

  question:        10
    section:       1
    line_1:
    line_3:        Data reduction and analysis will be supported on two computer facilities at
    line_4:        the University of Wisconsin in Madison:
    line_6:        a) a VAX 11/780 computer under the VMS operating system with extensive
    line_7:        application software including IRAF/STSDAS;
    line_8:        b) a microVAX cluster running under ULTRIX;
    line_11:       Both computer facilities support the FITS tape standards and thus can
    line_12:       readily access the ST-FITS data export products.

!
!end of general form text

general_form_address:

  lname:           DOLAN
    fname:         JOE
    mi:            F.
    category:      CON
    inst:          GSFC
    addr_1:        CODE 681
    city:          GREENBELT
    state:         MD
    zip:           20771
    country:       USA
    phone:         301-344-5920

!

  lname:           SLOVAK
    fname:         MARK
    mi:            H.
    category:      CON
    inst:          UNIV. OF WISCONSIN
    addr_1:        475 N. CHARTER STREET
    city:          MADISON
    state:         WI
    zip:           53706
    country:       USA
    phone:         608-262-7542

!

  lname:           BLESS
    fname:         ROBERT
    mi:            C.
    category:      PI
    inst:          UNIVERSITY OF WISCONSIN
    addr_1:        475 N. CHARTER STREET
    city:          MADISON
    state:         WI
    zip:           53706
    country:       USA
    phone:         608-262-1715

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        SAO4165
    descr_1:       B3 STAR IN CVZ
    pos_1:         RA=00H 34M 38.135S +/- 0.01S,
    pos_2:         DEC=+72D 37' 12.66" +/- 0.1"
    equinox:       1950
    plate_req:     NO
    fluxnum_1:     1
    fluxval_1:     V=7.1, TYPE=B3

!

    targnum:       2
    name_1:        SAO13012
    descr_1:       B2 STAR IN CVZ
    pos_1:         RA=04H 01M 44.278S +/- 0.01S,
    pos_2:         DEC=61D 58' 0.83" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=6.7,TYPE=B2

!

    targnum:       3
    name_1:        SAO6790
    descr_1:       B3 STAR IN CVZ
    pos_1:         RA=09H 10M 41.849S +/- 0.01S,
    pos_2:         DEC=79D 29' 21.79" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=8.5,TYPE=B3

!

    targnum:       4
    name_1:        SAO16291
    descr_1:       B9 STAR IN CVZ
    pos_1:         RA=13H 08M 29.367S +/- 0.01S,
    pos_2:         DEC=69D 49' 32.25" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=7.4,TYPE=B9

!

    targnum:       5
    name_1:        SAO16956
    descr_1:       ^
    pos_1:         RA=16H 05M 24.973S +/- 0.01S,
    pos_2:         DEC=61D 45' 29.99" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=8.0,TYPE=B9

!

    targnum:       6
    name_1:        SAO9827
    descr_1:       B3 STAR IN CVZ
    pos_1:         RA=20H 38M 01.723S +/- 0.01S,
    pos_2:         DEC=79D 15' 15.00" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=6.8,TYPE=B3

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/POL
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 2;
    req_2:         SEQ 1-10 NON-INT;
    req_3:         GROUP 1-40 WITHIN 24 H;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       2.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/POL
    opmode:        IMAGE
    aperture:      POL0
    sp_element:    F327M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE = 10,
    param_2:       Y-SIZE = 10,
    param_3:       SPACING = 0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       3.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/POL
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 4;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       4.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/POL
    opmode:        IMAGE
    aperture:      POL90
    sp_element:    F216M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE = 10,
    param_2:       Y-SIZE = 10,
    param_3:       SPACING = 0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       5.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/POL
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 6;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       6.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/POL
    opmode:        IMAGE
    aperture:      POL45
    sp_element:    F277M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE = 10,
    param_2:       Y-SIZE = 10,
    param_3:       SPACING = 0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       7.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/POL
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 8;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       8.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/POL
    opmode:        IMAGE
    aperture:      POL135
    sp_element:    F237M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE = 10,
    param_2:       Y-SIZE = 10,
    param_3:       SPACING = 0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       9.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/POL
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 10;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       10.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/POL
    opmode:        IMAGE
    aperture:      0.65
    sp_element:    F160LP
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE = 10,
    param_2:       Y-SIZE = 10,
    param_3:       SPACING = 0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S.  LINE 10 REQUIRES
    comment_2:     APERTURE 1A3 IN POL IDT (BETWEEN 45
    comment_3:     AND 135).

!

    linenum:       11.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV1
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 12;
    req_2:         SEQ 11-20 NON-INT;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       12.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV1
    opmode:        IMAGE
    aperture:      1.0-B
    sp_element:    F248M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE = 10,
    param_2:       Y-SIZE = 10,
    param_3:       SPACING = 0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S.  WANT "K" FILTER
    comment_2:     STRIP.

!

    linenum:       13.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV1
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 14;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       14.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV1
    opmode:        IMAGE
    aperture:      1.0-A
    sp_element:    F184W
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S.

!

    linenum:       15.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/UV1
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 16;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       16.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV1
    opmode:        IMAGE
    aperture:      1.0-B
    sp_element:    F135W
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLT-TIME=0.01S.  WANT "C" FILTER
    comment_2:     STRIP.

!

    linenum:       17.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV1
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 18;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       18.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV1
    opmode:        IMAGE
    aperture:      1.0-A
    sp_element:    F152M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       19.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV1
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 20;
    comment_1:     NOTE SAMPLE-TIME=0.001.

!

    linenum:       20.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/UV1
    opmode:        IMAGE
    aperture:      0.4-B
    sp_element:    F278N
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       21.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/VIS
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 22;
    req_2:         SEQ 21-30.7 NON-INT;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       22.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/VIS
    opmode:        IMAGE
    aperture:      1.0-B
    sp_element:    F620W
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       23.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/VIS
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 24;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       24.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/VIS
    opmode:        IMAGE
    aperture:      1.0-A
    sp_element:    F450W
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       #
    param_2:       #
    param_3:       #
    param_4:       #
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       25.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/VIS
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 26;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       26.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/VIS
    opmode:        IMAGE
    aperture:      1.0-B
    sp_element:    F184W
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       27.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/VIS
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 28;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       28.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/VIS
    opmode:        IMAGE
    aperture:      1.0-B
    sp_element:    F355M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       29.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/VIS
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 30;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       30.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/VIS
    opmode:        IMAGE
    aperture:      0.4-B
    sp_element:    F551W
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S.  WANT "I" FILTER
    comment_2:     STRIP.

!

    linenum:       30.500
    sequence_1:    ^
    targname:      ^
    config:        HSP/VIS
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 30.6;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       30.600
    sequence_1:    ^
    targname:      ^
    config:        HSP/PMT/VIS
    opmode:        SPLIT
    aperture:      1.0
    sp_element:    F750W/F320N
    num_exp:       1
    time_per_exp:  4S
    fluxnum_1:     1
    priority:      1
    param_1:       SAMPLE-TIME=0.01,
    param_2:       DATA-FORMAT=WORD,
    comment_1:     PMT APERTURE ON IDT#3

!

    linenum:       30.700
    sequence_1:    ^
    targname:      ^
    config:        HSP/VIS
    opmode:        IMAGE
    aperture:      1.0-A
    sp_element:    F320N
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       31.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV2
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 32;
    req_2:         SEQ 31-40 NON-INT;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       32.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV2
    opmode:        IMAGE
    aperture:      1.0-B
    sp_element:    F145M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S.  WANT "K" FILTER
    comment_2:     STRIP.

!

    linenum:       33.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV2
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 34;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       34.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV2
    opmode:        IMAGE
    aperture:      1.0-A
    sp_element:    F278N
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       35.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV2
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 36;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       36.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/UV2
    opmode:        IMAGE
    aperture:      1.0-B
    sp_element:    F179M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       37.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/UV2
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 38;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       38.000
    sequence_1:    DEFINE
    sequence_2:    TEST
    targname:      #
    config:        HSP/UV2
    opmode:        IMAGE
    aperture:      1.0-B
    sp_element:    F184W
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       39.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV2
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    req_1:         ONBOARD ACQ FOR 40;
    comment_1:     NOTE SAMPLE-TIME=0.001S.

!

    linenum:       40.000
    sequence_1:    ^
    targname:      ^
    config:        HSP/UV2
    opmode:        IMAGE
    aperture:      0.4-A
    sp_element:    F152M
    num_exp:       1
    time_per_exp:  1S
    fluxnum_1:     1
    priority:      1
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,
    comment_1:     SAMPLE-TIME=0.01S

!

    linenum:       41.000
    sequence_1:    USE TEST
    targname:      SAO4165
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT = WORD,
    req_1:         SELECT 1 OF 41 OR 42 OR 43
    req_2:         OR 44 OR 45 OR 46;
    req_3:         COND IF STAR IN CVZ;

!

    linenum:       42.000
    sequence_1:    ^
    targname:      SAO13012
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT = LONGWORD,
    req_1:         COND IF STAR IN CVZ;

!

    linenum:       43.000
    sequence_1:    ^
    targname:      SAO6790
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT = WORD,
    req_1:         COND IF STAR IN CVZ;

!

    linenum:       44.000
    sequence_1:    USE
    sequence_2:    TEST
    targname:      SAO16291
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT = WORD,
    req_1:         COND IF STAR IN CVZ;

!

    linenum:       45.000
    sequence_1:    ^
    targname:      SAO16956
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT = WORD,
    req_1:         COND IF STAR IN CVZ;

!

    linenum:       46.000
    sequence_1:    ^
    targname:      SAO9827
    param_1:       X-SIZE=10,
    param_2:       Y-SIZE=10,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT = LONGWORD,
    req_1:         COND IF STAR IN CVZ;

!
! end of exposure logsheet

! No scan data records found