! File: 1374C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:16:35:26 coverpage: title_1: LONG WAVELENGTH PHOTOMETRIC CALIBRATION AND D2 LINEARITY CHECK proposal_for: SV/HRS pi_fname: DENNIS pi_mi: C. pi_lname: EBBETS pi_inst: BALL AEROSPACE SYSTEMS GROUP pi_country: USA pi_phone: 303-939-5964 keywords_1: HRS, CALIBRATION, SCIENCE VERIFICATION hours_pri: 1.00 num_pri: 1 hrs: Y ! end of coverpage abstract: line_1: SV Test to measure sensitivity longward of lambda = 3200A, and to calibrate the line_2: linearity ("paired pulse effect") of detector D2. ! ! end of abstract general_form_proposers: lname: EBBETS fname: D. mi: C. inst: BASG country: USA ! lname: MARAN fname: S. mi: P. inst: GSFC/NASA country: USA ! lname: BRANDT fname: J. mi: C. inst: LASP/UNIV OF CO country: USA ! lname: SAVAGE fname: B. mi: D. inst: UNIV. OF WISCONSIN country: USA ! lname: LINSKY fname: J. mi: L. inst: JILA/UNIV. OF COLORADO country: USA ! lname: CARPENTER fname: K. mi: G. inst: NASA/GSFC country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: Beta Cen will be acquired with mirror A1 and centered in the Large Science line_2: Aperture. Grating G4 (G270M) will be used to record the spectrum from line_3: 2300-3400A in steps of 25A. It will also be observed with Echelle B at line_4: carrousel positions corresponding to m lambda = 56200 and 59000. At each line_5: position orders 24-18 will be measured. These data will be used in conjunction line_6: with similar scans of Mu Col taken in the prerequisite tests to derive the line_7: count rate linearity. line_9: The HRS is intentionally operated outside of the nominal wavelength ranges in line_10: lines 2.5, 3.7, 4.0. ! question: 5 section: 1 line_1: line_3: SV Prerequisties: line_5: 1. HRS-05.2 - Mode II Target Locate (Prop 1352) line_7: SV Minimum Plan: NONE line_8: SV Delta Plan: ALL - but high priority delta plan line_9: Guiding Tolerance: 0.025 arc seconds ! question: 7 section: 1 line_1: Calibrated long wavelength sensitivities will be added to data reduction line_2: software calibration files. line_4: Time constants for paired-pulse effect will be determine and updated in data line_5: reduction software. line_7: Ratio of 2.0 to 0.25 aperture transmission for ! question: 10 section: 1 line_1: Data analysis facilities line_2: Personnel line_3: Travel and publications support ! !end of general form text general_form_address: lname: MARAN fname: STEPHEN mi: P. category: CON inst: NASA/GSFC addr_1: CODE 680 addr_2: GREENBELT ROAD city: GREENBELT state: MD zip: 20771 country: USA phone: 301-344-8607 ! lname: CARPENTER fname: KENNETH mi: G. category: CON inst: NASA/GSFC addr_1: CODE 680 city: GREENBELT state: MD zip: 20771 country: USA phone: 301-286-3453 ! lname: SAVAGE fname: BLAIR mi: D. category: CON inst: UNIV. OF WISCONSIN addr_1: DEPT. OF ASTRONOMY addr_2: 475 N. CHARTER ST. city: MADISON state: WI zip: 53706 country: USA phone: 608-262-4909 ! lname: EBBETS fname: DENNIS mi: C. category: PI inst: BALL AEROSPACE SYSTEMS GROUP addr_1: P.O. BOX 1062 FT-3 addr_2: COMMERCE AND ARAPHOE STS. city: BOULDER state: CO zip: 80306 country: USA phone: 303-939-5964 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: BETA-CEN descr_1: BRIGHT, UV STANDARD STAR pos_1: RA=14H 03M 50.00S +/- 0.5S, pos_2: DEC=-60D 22' 23.0" +/- 0.5", pos_3: PLATE-ID=06EU equinox: 2000 pm_or_par: Y pos_epoch_yr: 1950.00 ra_pm_val: -0.001333 ra_pm_unct: 0.000067 dec_pm_val: -0.0230 dec_pm_unct: 0.0020 comment_1: BRIGHT TARGET comment_2: LIST OF UV STANDARDS fluxnum_1: 1 fluxval_1: V=0.62 fluxnum_2: 2 fluxval_2: F-CONT(3000)=1.1 E-8 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 0.500 targname: WAVE config: HRS opmode: DEFCAL sp_element: MIRROR-N1 time_per_exp: 30S priority: 1 req_1: SEQ 0.5-1 NO GAP; req_2: CYCLE 0 / 0.5-4; ! linenum: 1.000 targname: BETA-CEN config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: MAP=END-POINT, param_2: FAINT=5000, param_3: BRIGHT=DEF, param_4: SEARCH-SIZE=5, req_1: ONBOARD ACQ FOR 2.1-4; comment_1: NO DEFCAL WITH A1. STEP-TIME=0.2 ! linenum: 2.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC1 sp_element: G270M wavelength: 2375 num_exp: 1 time_per_exp: 3.2S priority: 1 param_2: STEP-PATT=3, req_1: CALIB FOR 2.1; req_2: SEQ 2-2.1 NO GAP; ! linenum: 2.100 targname: BETA-CEN config: HRS opmode: WSCAN aperture: 2.0 sp_element: G270M wavelength: 2287.5-2687.5 num_exp: 1 time_per_exp: 12.8S fluxnum_1: 2 priority: 1 param_2: STEP-PATT=3, param_4: WAVE-STEP=25, param_5: COMB=NO, comment_1: SHUTTER CLOSED FOR 2, OPEN comment_2: FOR 2.1. COMPUTE AND APPLY comment_3: SPYBAL FOR 2, APPLY ONLY TO comment_4: 2.1. 16 CARROUSEL POSITIONS comment_5: FOR 2.1, CENTERD AT LAMBDA= comment_6: 2300, 2325, 2350 ... 2675. ! linenum: 2.200 targname: WAVE config: HRS opmode: ACCUM aperture: SC1 sp_element: G270M wavelength: 2900 num_exp: 1 time_per_exp: 3.2S priority: 1 param_2: STEP-PATT=3, req_1: CALIB FOR 2.3; req_2: SEQ 2.2-2.3 NO GAP; ! linenum: 2.300 targname: BETA-CEN config: HRS opmode: WSCAN aperture: 2.0 sp_element: G270M wavelength: 2687.5-3087.5 num_exp: 1 time_per_exp: 12.8S s_to_n: 100 fluxnum_1: 2 priority: 1 param_2: STEP-PATT=3, param_4: WAVE-STEP=25, param_5: COMB=NO, comment_1: SHUTTER CLOSED FOR 2.2, OPEN comment_2: FOR 2.3. COMPUTE AND APPLY comment_3: SPYBAL FOR 2.2, APPLY ONLY TO comment_4: 2.3. 16 CARROUSEL POSITIONS comment_5: FOR 2.3, CENTERD AT LAMBDA= comment_6: 2700, 2725, 2750 ... 3075. ! linenum: 2.400 targname: WAVE config: HRS opmode: ACCUM aperture: SC1 sp_element: G270M wavelength: 3200 num_exp: 1 time_per_exp: 3.2S priority: 1 param_2: STEP-PATT=3, req_1: CALIB FOR 2.5; req_2: SEQ 2.4-2.5 NO GAP; ! linenum: 2.500 targname: BETA-CEN config: HRS opmode: WSCAN aperture: 2.0 sp_element: G270M wavelength: 3087.5-3412.5 num_exp: 1 time_per_exp: 260S s_to_n: 100 fluxnum_1: 2 priority: 1 param_2: STEP-PATT=3, param_3: METER=YES, param_4: WAVE-STEP=25, param_5: COMB=FOUR, param_6: HIGH-COUNT=520000, param_7: LOW-RATE=10, comment_1: SHUTTER CLOSED FOR 2.4, OPEN comment_2: FOR 2.5. COMPUTE AND APPLY comment_3: SPYBAL FOR 2.4, APPLY ONLY TO comment_4: 2.5. 13 CARROUSEL POSITIONS comment_5: FOR 2.5, CENTERD AT LAMBDA= comment_6: 3100, 3125, 3150 ... 3400 ! linenum: 2.510 targname: BETA-CEN config: HRS opmode: ACQ/PEAKUP aperture: 0.25 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 1M fluxnum_1: 1 priority: 1 req_1: SEQ 2.51-2.53 NO GAP; ! linenum: 2.520 targname: BETA-CEN config: HRS opmode: IMAGE aperture: 0.25 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 2M fluxnum_1: 1 priority: 1 param_1: DELTA-X=1, param_2: DELTA-Y=1, param_3: PRECISION=HIGH, ! linenum: 2.530 targname: ^ config: ^ opmode: WSCAN aperture: ^ sp_element: G270M wavelength: 3087.5-3412.5 num_exp: 1 time_per_exp: 260S s_to_n: 100 fluxnum_1: 2 priority: 1 param_1: STEP-PATT=3, param_2: WAVE-STEP=25, param_3: METER=YES, param_4: COMB=FOUR, param_5: HIGH-COUNT=520000, param_6: LOW-RATE=10, comment_1: HIGH-COUNT=40000 ON LINES 2.5 AND comment_2: 2.53 REFERS TO SUM OF BINS 1-4. WANT comment_3: AN AVERAGE MAXIMUM OF 10000 CTS/DIODE comment_4: IN EACH OF THE 4 SCIENCE BINS. ! linenum: 2.700 targname: WAVE config: HRS opmode: ACCUM aperture: SC1 sp_element: ECH-B21 wavelength: 2676.190 num_exp: 1 time_per_exp: 27.2S priority: 1 param_1: STEP-PATT=7, param_2: COMB=NO, req_1: CALIB FOR 2.8; req_2: SEQ 2.7-3 NO GAP; comment_1: COMPUTE & APPLY SPYBAL comment_2: OFFSET IN 2.7. CARROUSEL comment_3: POSITIONED FOR MLAMBDA = comment_4: 56200. ! linenum: 2.800 targname: WAVE config: HRS opmode: OSCAN aperture: SC1 sp_element: ECH-B wavelength: 3122.222 num_exp: 1 time_per_exp: 190.4S priority: 1 param_3: OSCAN-MIN=18, param_4: OSCAN-MAX=24, param_5: STEP-PATT=7, param_6: COMB=NO, req_1: CALIB FOR 3 comment_1: APPLY EXISTING SPYBAL. DO comment_2: NOT COMPUTE OFFSET. SHUTTER comment_3: CLOSED FOR 2.7 & 2.8. ! linenum: 3.000 targname: BETA-CEN config: HRS opmode: OSCAN aperture: 2.0 sp_element: ECH-B wavelength: 3122.222 num_exp: 1 time_per_exp: 47.6S s_to_n: 80 fluxnum_1: 2 priority: 1 param_4: OSCAN-MIN=18, param_5: OSCAN-MAX=24, param_6: STEP-PATT=7, param_7: COMB=NO, comment_1: DO NOT MOVE CARROUSEL comment_2: BETWEEN 2.7-3. OPEN comment_3: SHUTTER FOR 3, APPLY comment_4: EXISTING SPYBAL. ! linenum: 3.700 targname: WAVE config: HRS opmode: ACCUM aperture: SC1 sp_element: ECH-B21 wavelength: 2809.524 num_exp: 1 time_per_exp: 54.4S priority: 1 param_1: STEP-PATT=7, param_2: COMB=NO, req_1: CALIB FOR 3.8; req_2: SEQ 3.7-4 NO GAP; comment_1: COMPUTE & APPLY SPYBAL comment_2: OFFSET IN 3.7. CARROUSEL comment_3: POSITIONED FOR MLAMBDA = comment_4: 59000. ! linenum: 3.800 targname: WAVE config: HRS opmode: OSCAN aperture: SC1 sp_element: ECH-B wavelength: 3277.778 num_exp: 1 time_per_exp: 190.4S priority: 1 param_3: OSCAN-MIN=18, param_4: OSCAN-MAX=24 param_5: STEP-PATT=7, param_6: COMB=NO, req_1: CALIB FOR 4; comment_1: APPLY EXISTING SPYBAL. DO comment_2: NOT COMPUTE OFFSET. SHUTTER comment_3: CLOSED FOR 3.7 & 3.8. ! linenum: 4.000 targname: BETA-CEN config: HRS opmode: OSCAN aperture: 2.0 sp_element: ECH-B wavelength: 3277.778 num_exp: 1 time_per_exp: 190.4S s_to_n: 80 fluxnum_1: 2 priority: 1 param_3: OSCAN-MIN=18, param_4: OSCAN-MAX=24, param_5: STEP-PATT=7, param_6: COMB=NO, comment_1: DO NOT MOVE CARROUSEL comment_2: BETWEEN 3.7-4. OPEN comment_3: SHUTTER FOR 4, APPLY comment_4: EXISTING SPYBAL. ! ! end of exposure logsheet ! No scan data records found