! File: 1370C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:16:24:00 coverpage: title_1: FAINT TARGET/BRIGHT NEIGHBOR TEST sci_cat: CALIBRATION proposal_for: SV/HRS pi_fname: KENNETH pi_mi: G. pi_lname: CARPENTER pi_inst: LASP/NASA-GSFC pi_country: USA pi_phone: 301-286-3453 hours_pri: 3.44 num_pri: 2 ! end of coverpage abstract: line_1: Verify capability of HRS to detect weak emission despite immediate proximity of line_2: a bright source. Measure near-angle scattering into line_3: HRS apertures from adjacent bright source. line_4: The test numbers indicate the relative priorities of all HRS SV tests. All line_5: internal tests and all the HRS external target acquisition tests must be run line_6: before this test. The numbering of the remaining tests indicates our line_7: preferences, but slight changes in their ordering are acceptable. line_9: Updated 8/24/89 to changed COND ON 50-58... to COND IF on line 49 and add COND line_10: IF to line 54. (PStanley) ! ! end of abstract general_form_proposers: lname: MARAN fname: S. mi: P. inst: NASA/GSFC country: USA ! lname: SAVAGE fname: B. mi: D. inst: UNIV. OF WISCONSIN country: USA ! lname: BRANDT fname: J. mi: C. inst: LASP/UNIV OF COLORADO country: USA ! lname: LINSKY fname: J. mi: L. inst: JILA/UNIV. OF COLORADO country: USA ! lname: EBBETS fname: D. mi: C. inst: BALL AEROSPACE SYS. DIV. country: USA ! lname: CARPENTER fname: K. mi: G. inst: LASP/NASA-GSFC country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: TARGETS: line_2: Type:(1)Bright, early-type HRS photometric standard line_3: (2)Bright, late-type star with spatially resolved line_4: circumstellar shell. line_5: Candidates: (1) mu Col (=HD 38666) line_6: (2) alpha Ori (=HD 39801)...highly preferred. line_7: Alternates: (2b) alpha Boo (=HD 124897) line_9: For mu Col: Collect spectral data with star centered in line_10: Large Science Aperture (LSA), and at 4 positions successfully line_12: offset farther from x-edge (and outside) of the aperture and line_13: then at 5 similar positions along the y-axis. line_14: Repeat using the Small Science Aperture (SSA). line_15: Perform at three widely-spaced wavelengths using low and line_16: intermediate resolution first-order gratings. line_17: For alpha Ori: Collect spectral data at one wavelength, line_18: intermediate resolution with star centered in the SSA and at line_19: three positions successively farther from the edge (and line_20: outside) of SSA. line_21: Time-on-Target: (1) 3.06 hours line_22: (2) .38 hours line_23: 3.44 hours ! question: 5 section: 0 line_1: The suite of internal tests 2767, 2768, 1409 and 1410 should be run before line_2: this tests along with 1352 to verify target acquisition. line_3: SV MINIMUM PLAN: lines 25 - 48 line_4: SV DELTA PLAN: 49-146 line_5: GUIDING TOLERANCE: 0.025" ! question: 6 section: 1 line_1: S/L sensitive? Yes. Assume allowable background line_2: 21 mv/arcsec2. ! question: 7 section: 1 line_1: Spectra will be reduced and analyzed with software developed by the HRS-IDT. line_2: Test will measure the degree to which HRS rejects light from objects line_3: in the immediate vicinity of, but outside of, the science line_4: apertures. No near-term changes/additions to the line_5: Project Data Base or PODPS pipeline will be required. ! !end of general form text general_form_address: lname: SAVAGE fname: BLAIR mi: D. category: CON inst: U. OF WISCONSIN addr_1: 475 N. CHARTER ST. city: MADISON state: WI zip: 57306 country: USA phone: 608-262-4909 ! lname: LINSKY fname: JEFFREY mi: L. category: CON inst: JILA/U. OF COLORADO addr_1: CAMPUS BOS 440 city: BOULDER state: CO zip: 80309 country: USA phone: 303-492-7838 ! lname: CARPENTER fname: KENNETH mi: G. category: PI inst: LASP/NASA-GSFC addr_1: CODE 681 city: GREENBELT state: MD zip: 20771 country: USA phone: 301-286-3453 ! lname: EBBETS fname: DENNIS mi: C. category: CON inst: BALL AEROSPACE SYS. DIV. addr_1: P.O. BOX 1062 city: BOULDER state: CO zip: 803061062 country: USA phone: 303-939-5964 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: HD38666 name_2: MU-COL descr_1: 09.5V pos_1: RA=05H 45M 59.9245S+/-0.2S, pos_2: DEC=-32D 18' 22.8"+/-0.2", pos_3: PLATE-ID=01WB equinox: 2000 pm_or_par: Y pos_epoch_bj: B pos_epoch_yr: 1950.00 ra_pm_val: 0.000267 ra_pm_unct: 0.000267 dec_pm_val: -0.0250 dec_pm_unct: 0.0030 rv_or_z: V=+109 fluxnum_1: 1 fluxval_1: V=5.17+/-0.01, TYPE=09.5V ! targnum: 2 name_1: HD39801 name_2: ALPHA-ORI descr_1: M2IAB pos_1: RA=05H 55M 10.29S+/-0.1S, pos_2: DEC=07D 24' 25.3"+/-0.1", pos_3: PLATE-ID=01W7 equinox: 2000 pm_or_par: Y pos_epoch_bj: B pos_epoch_yr: 1950.00 ra_pm_val: 0.001667 ra_pm_unct: 0.000067 dec_pm_val: 0.0100 dec_pm_unct: 0.0010 an_prlx_val: 0.0050 an_prlx_unct: 0.0100 rv_or_z: V=+21 fluxnum_1: 1 fluxval_1: V=0.8+/-0.5, TYPE=M2IAB ! targnum: 3 name_1: HD124897 name_2: ALPHA-BOO descr_1: K2III pos_1: RA=14H 15M 40.98S+/-0.1S, pos_2: DEC=19D 11' 32.1"+/-0.1", pos_3: PLATE-ID=019M equinox: 2000 pm_or_par: Y pos_epoch_bj: B pos_epoch_yr: 1950.00 ra_pm_val: -0.073200 ra_pm_unct: 0.000067 dec_pm_val: -1.9990 dec_pm_unct: 0.0010 an_prlx_val: 0.0970 an_prlx_unct: 0.0100 rv_or_z: V=-5 comment_1: TARGET 3 IS ALTERNATE TO TARGET 2; comment_2: LATTER TARGET STRONGLY PREFERRED. fluxnum_1: 1 fluxval_1: V=0.06+/-0.2, TYPE=K2III ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: SAMAC targname: # config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: FAINT=150, param_3: MAP=END-POINT comment_1: STEP-TIME=0.2 comment_2: LINE 1 ACQUIRES TARGET comment_3: BY SPIRAL SEARCH. comment_4: EXPECT ABOUT comment_5: 350 CTS/200MS FROM comment_6: MU COL WITH SA. ! linenum: 2.000 sequence_1: DEFINE sequence_2: SAMLSA targname: # config: HRS opmode: ACQ/PEAKUP aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 9.2S fluxnum_1: 1 priority: 1 comment_1: LINE 2 RE-CENTERS TARGET IN LSA comment_2: AFTER SERIES OF SAM'S ! linenum: 2.500 sequence_1: DEFINE sequence_2: SAMLSA targname: # config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: 1 comment_1: TAKE MAP OF LSA comment_2: AFTER EACH LOCATE ! linenum: 3.000 sequence_1: DEFINE sequence_2: SAMSSA targname: # config: HRS opmode: IMAGE aperture: 0.25 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 16.2S fluxnum_1: 1 priority: 1 param_1: NX=9, param_2: NY=9 comment_1: TAKE MAP OF SSA comment_2: IN PLACE OF PEAKUP comment_3: AFTER EACH SKEW TO SSA ! linenum: 5.000 sequence_1: DEFINE sequence_2: SAMLX targname: # config: HRS opmode: ACCUM aperture: 2.0 sp_element: # wavelength: 1000 num_exp: 1 time_per_exp: 1M priority: 1 param_1: # req_1: POS TARG 0.0,0.0 ! linenum: 6.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 1M priority: 1 param_1: ^ req_1: POS TARG 2.0,0.0 ! linenum: 7.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 2.5M priority: 1 param_1: ^ req_1: POS TARG 4.0,0.0 ! linenum: 8.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 8.0,0.0 ! linenum: 9.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 16.0,0.0 ! linenum: 10.000 sequence_1: DEFINE sequence_2: SAMLY targname: # config: HRS opmode: ACCUM aperture: 2.0 sp_element: # wavelength: 1000 num_exp: 1 time_per_exp: 1M priority: 1 param_1: # req_1: POS TARG 0.0,0.0 ! linenum: 11.000 sequence_1: DEFINE sequence_2: SAMLY targname: # config: HRS opmode: ACCUM aperture: 2.0 sp_element: # wavelength: 1000 num_exp: 1 time_per_exp: 1M priority: 1 param_1: # req_1: POS TARG 0.0,2.0 ! linenum: 12.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 2.5M priority: 1 param_1: ^ req_1: POS TARG 0.0,4.0 ! linenum: 13.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 0.0,8.0 ! linenum: 14.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 0.0,16.0 ! linenum: 15.000 sequence_1: DEFINE sequence_2: SAMSX targname: # config: HRS opmode: ACCUM aperture: 0.25 sp_element: # wavelength: 1000 num_exp: 1 time_per_exp: 1M priority: 1 param_1: # req_1: POS TARG 0.0,0.0 ! linenum: 16.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 1M priority: 1 param_1: ^ req_1: POS TARG 0.25,0.0 ! linenum: 17.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 2.5M priority: 1 param_1: ^ req_1: POS TARG 0.75,0.0 ! linenum: 18.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 1.75,0.0 ! linenum: 19.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 3.75,0.0 ! linenum: 20.000 sequence_1: DEFINE sequence_2: SAMSY targname: # config: HRS opmode: ACCUM aperture: 0.25 sp_element: # wavelength: 1000 num_exp: 1 time_per_exp: 1M priority: 1 param_1: # req_1: POS TARG 0.0,0.0 ! linenum: 21.000 sequence_1: DEFINE sequence_2: SAMSY targname: # config: HRS opmode: ACCUM aperture: 0.25 sp_element: # wavelength: 1000 num_exp: 1 time_per_exp: 1M priority: 1 param_1: # req_1: POS TARG 0.0,0.25 ! linenum: 22.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 2.5M priority: 1 param_1: ^ req_1: POS TARG 0.0,0.75 ! linenum: 23.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 0.0,1.75 ! linenum: 24.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 0.0,3.75 ! linenum: 25.000 sequence_1: USE SAMAC targname: HD38666 req_1: ONBOARD ACQ FOR 26; req_2: SEQ 25-48 NO GAP; req_3: CYCLE 0 / 25-146; ! linenum: 26.000 sequence_1: USE SAMLSA targname: HD38666 req_1: ONBOARD ACQ FOR 28; ! linenum: 28.000 sequence_1: USE SAMLY targname: ^ sp_element: G140L wavelength: X1.2 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=1280 ! linenum: 31.000 sequence_1: USE SAMLSA targname: HD38666 req_1: ONBOARD ACQ FOR 32; ! linenum: 32.000 sequence_1: USE SAMLY targname: ^ sp_element: G140L wavelength: X1.684 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=1568 ! linenum: 33.000 sequence_1: USE sequence_2: SAMLSA targname: HD38666 req_1: ONBOARD ACQ FOR 35; comment_1: PEAKUP IN LSA. ! linenum: 35.000 sequence_1: USE SAMSSA targname: ^ req_1: ONBOARD ACQ FOR 36; ! linenum: 36.000 sequence_1: USE SAMSY targname: HD38666 sp_element: G140L wavelength: X1.2 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=1280 ! linenum: 39.000 sequence_1: USE SAMSSA targname: ^ req_1: ONBOARD ACQ FOR 40; ! linenum: 40.000 sequence_1: USE SAMSY targname: HD38666 sp_element: G140L wavelength: X1.684 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=1568 ! linenum: 43.000 sequence_1: USE SAMLSA targname: ^ req_1: ONBOARD ACQ FOR 44; ! linenum: 44.000 sequence_1: USE SAMLY targname: ^ sp_element: G270M wavelength: X2.8 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=2790 ! linenum: 45.000 sequence_1: USE SAMLSA targname: ^ req_1: ONBOARD ACQ FOR 47; comment_1: LSA PEAKUP. ! linenum: 47.000 sequence_1: USE SAMSSA targname: ^ req_1: ONBOARD ACQ FOR 48; ! linenum: 48.000 sequence_1: USE SAMSY targname: ^ sp_element: G270M wavelength: X2.8 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=2790 ! linenum: 49.000 targname: HD39801 config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 115.6S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: FAINT=80, param_3: MAP=END-POINT req_1: ONBOARD ACQ FOR 49.30; req_2: SELECT 1 OF 49-53 OR 54-58; req_3: COND IF TARGET AVAILABLE IN SV/49-49.6; req_4: COND IF SV DELTA PLAN/49-49.6; comment_1: STEP-TIME=0.400, POST-SA comment_2: EXPECT ABOUT 200 CTS/400MS ! linenum: 49.300 targname: ^ config: HRS opmode: ACQ/PEAKUP aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 73.6S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 49.60 comment_1: CENTER IN LSA AFTER NEW DEFCAL comment_2: STEP-TIME=1.6SEC ! linenum: 49.600 targname: ^ config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-N2 num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: 1 comment_1: TAKE MAP AFTER CENTERING comment_2: 200 MSEC INTEGRATIONS ! linenum: 50.000 targname: HD39801 config: HRS opmode: ACCUM aperture: 0.25 sp_element: G270M wavelength: 2800 num_exp: 1 time_per_exp: 1M priority: 1 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=2795.5 req_1: POS TARG 0.0,0.0; req_2: SEQ 50-53 NO GAP; req_3: COND IF TARGET AVAILABLE IN SV; req_4: COND IF SV DELTA PLAN; ! linenum: 51.000 targname: HD39801 config: HRS opmode: ACCUM aperture: 0.25 sp_element: G270M wavelength: 2800 num_exp: 1 time_per_exp: 1M priority: 1 param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=60000, param_4: METER-WAVE=2795.5 req_1: POS TARG 0.155,0.0; req_4: COND IF TARGET AVAILABLE IN SV; req_5: COND IF SV DELTA PLAN; ! linenum: 52.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 0.205,0.0; req_4: COND IF TARGET AVAILABLE IN SV; req_5: COND IF SV DELTA PLAN; ! linenum: 53.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 10M priority: 1 param_1: ^ req_1: POS TARG 0.255,0.0; req_2: COND IF TARGET AVAILABLE IN SV; req_3: COND IF SV DELTA PLAN; ! linenum: 54.000 targname: HD124897 config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: FAINT=100, param_3: MAP=END-POINT req_1: ONBOARD ACQ FOR 54.30; req_2: COND IF TARGET AVAILABLE IN SV/54-54.6; req_3: COND IF SV DELTA PLAN/54-54.6; comment_1: STEP-TIME=0.200, POST-SA comment_2: EXPECT ABOUT 250 CTS/200MS ! linenum: 54.300 targname: ^ config: HRS opmode: ACQ/PEAKUP aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 73.6S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 54.60 comment_1: CENTER IN LSA AFTER NEW DEFCAL comment_2: STEP-TIME=1.6SEC ! linenum: 54.600 targname: ^ config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-N2 num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: 1 comment_1: TAKE MAP AFTER CENTERING comment_2: 200 MSEC INTEGRATIONS ! linenum: 55.000 targname: HD124897 config: HRS opmode: ACCUM aperture: 0.25 sp_element: G270M wavelength: 2800 num_exp: 1 time_per_exp: 1M priority: 1 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=2795.5 req_1: POS TARG 0.0,0.0; req_2: SEQ 55-58 NO GAP; req_3: COND IF TARGET AVAILABLE IN SV; req_4: COND IF SV DELTA PLAN; ! linenum: 56.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 1M priority: 1 param_1: ^ req_1: POS TARG 0.145,0.0; req_4: COND IF TARGET AVAILABLE IN SV; req_5: COND IF SV DELTA PLAN; ! linenum: 57.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 5M priority: 1 param_1: ^ req_1: POS TARG 0.170,0.0; req_4: COND IF TARGET AVAILABLE IN SV; req_5: COND IF SV DELTA PLAN; ! linenum: 58.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: 10M priority: 1 param_1: ^ req_1: POS TARG 0.195,0.0; req_4: COND IF TARGET AVAILABLE IN SV; req_5: COND IF SV DELTA PLAN; comment_1: LINES 54-58 ARE ALTERNATES comment_2: FOR LINES 49-53, IF LATTER comment_3: LINES ARE NOT OBTAINABLE comment_4: DURING SV PERIOD. ! linenum: 125.000 sequence_1: USE SAMAC targname: HD38666 req_1: ONBOARD ACQ FOR 126; req_2: SEQ 126-146 NO GAP; req_3: COND IF SV DELTA PLAN; ! linenum: 126.000 sequence_1: USE SAMLX targname: ^ sp_element: G140L wavelength: X1.2 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=1280 req_1: COND IF SV DELTA PLAN ! linenum: 129.000 sequence_1: USE SAMLSA targname: HD38666 req_1: ONBOARD ACQ FOR 130; req_3: COND IF SV DELTA PLAN; ! linenum: 130.000 sequence_1: USE SAMLX targname: HD38666 sp_element: G140L wavelength: X1.684 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=1568 req_1: COND IF SV DELTA PLAN ! linenum: 133.000 sequence_1: USE sequence_2: SAMLSA targname: ^ req_1: ONBOARD ACQ FOR 133.1; req_3: COND IF SV DELTA PLAN; comment_1: PEAKUP IN LSA. ! linenum: 133.100 sequence_1: USE SAMSSA targname: ^ req_1: ONBOARD ACQ FOR 134; req_3: COND IF SV DELTA PLAN; comment_1: PEAKUP IN SSA. ! linenum: 134.000 sequence_1: USE SAMSX targname: HD38666 sp_element: G140L wavelength: X1.2 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=1280 req_1: COND IF SV DELTA PLAN ! linenum: 137.000 sequence_1: USE SAMSSA targname: ^ req_1: ONBOARD ACQ FOR 138; req_3: COND IF SV DELTA PLAN; ! linenum: 138.000 sequence_1: USE SAMSX targname: ^ sp_element: G140L wavelength: X1.684 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=1568 req_1: COND IF SV DELTA PLAN ! linenum: 141.000 sequence_1: USE SAMLSA targname: ^ req_1: ONBOARD ACQ FOR 142; req_3: COND IF SV DELTA PLAN; ! linenum: 142.000 sequence_1: USE SAMLX targname: ^ sp_element: G270M wavelength: X2.8 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=2790 req_1: COND IF SV DELTA PLAN ! linenum: 145.000 sequence_1: USE SAMLSA targname: ^ req_1: ONBOARD ACQ FOR 145.1; req_3: COND IF SV DELTA PLAN; comment_1: LSA PEAKUP. ! linenum: 145.100 sequence_1: USE SAMSSA targname: HD38666 req_1: ONBOARD ACQ FOR 146; req_3: COND IF SV DELTA PLAN; comment_1: SSA PEAKUP. ! linenum: 146.000 sequence_1: USE SAMSX targname: ^ sp_element: G270M wavelength: X2.8 param_1: STEP-PATT=2, param_2: METER=YES, param_3: HIGH-COUNT=30000, param_4: METER-WAVE=2790 req_1: COND IF SV DELTA PLAN ! ! end of exposure logsheet ! No scan data records found