! File: 1361C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:15:55:49 coverpage: title_1: LOW RESOLUTION SCATTERED LIGHT/SOLAR BLIND CHARACTERISTICS sci_cat: CALIBRATION proposal_for: SV/HRS pi_fname: KENNETH pi_mi: G. pi_lname: CARPENTER pi_inst: LASP/NASA-GSFC pi_country: USA pi_phone: 301-286-3453 hours_pri: 1.22 num_pri: 1 fos: Y hrs: Y ! end of coverpage abstract: line_1: The purposes of this test are to measure the wide angle scattered light and line_2: solar blind characteristics of the low resolution (G140L) grating line_3: configuration. line_5: The test numbers indicate the relative priorities of all HRS SV tests. All line_6: internal tests and all the HRS external target acquisition tests must be run line_7: before this test. Slight changes in the position of this test within the later line_8: tests are acceptable. ! ! end of abstract general_form_proposers: lname: MARAN fname: S. mi: P. inst: NASA/GSFC country: USA ! lname: BRANDT fname: J. mi: C. inst: LASP/UNIV OF CO country: USA ! lname: LINSKY fname: J. mi: L. inst: UNIV. OF COLORADO country: USA ! lname: SAVAGE fname: B. mi: D. inst: UNIV. OF WISCONSIN country: USA ! lname: EBBETS fname: D. mi: C. inst: BALL AEROSPACE SYSTEMS DIV. country: USA ! lname: CARPENTER fname: K. title: PI mi: G. inst: LASP/NASA-GSFC country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: Target = Gamma Dra k5 III m(v) = 2.2 line_2: Four carrousel positions in G140L configuration (low resolution) line_4: LAMBDA A exposure time line_5: 1200 20m line_6: 1400 15 line_7: 1600 15 line_8: 1800 15 line_10: 1. Use large aperture (LSA) line_11: 2. Compute per standard operations, and apply offset at all four settings line_12: 3. Four diode comb. addition, seperation = 1 diode width (COMB=FOUR) line_13: 4. No exposure metering line_14: 5. Substep pattern with four steps/diode width on spectrum line_15: While on target, perform FOS scattered light test. (These FOS line_16: observations have been added to HRS-10 on agreement from Ken line_17: Carpenter, PI for this test, Ron Downes from FOS and Keith line_18: Kalinowski, STP-G. line_19: Acquire target in FOS using a 2 step peak up onboard target line_20: acquisition as follows: line_21: o 6 points/line, 6 lines, 1 sec/dwell, 0.7 arc-sec steps in 1.0 line_22: arc-sec aperture line_23: o 5 points/line, 5 lines, 1 sec/dwell, 0.2 arc-sec steps in 0.3 ! question: 3 section: 2 line_1: arc-sec aperture. line_2: Take a 1000 sec spectrum with G130H and 1.0 arc-sec aperture. ! question: 5 section: 1 line_1: SV Prerequisites: line_2: HRS-05.2 Mode II Target Locate Acquisition (Prop 1352) must have line_3: been successfully completed and onboard target acquisition functional. line_5: HRS-08 Low Resolution Calibration (Prop 1354) must have been line_6: completed at least 7 days prior to this test. line_8: HRS-09 Intermediate/Low Resolution Cross-Calibration (Prop 1355) line_9: data results will be required prior to analyzing the results of this line_10: test. line_12: FOS-07 Mode II Target Acquisition (Prop 2195) must have been line_13: successfully completed and onboard peakup acquisitions functional. line_15: Pointing Stability: A pointing accuracy of 0.03" is required for this line_16: test (10%) of smallest aperture used - 0.3" in FOS, 0.25 in GHRS). If line_17: coarse track or other mode provides this accuracy, fine lock is not required. line_18: SV Minimum Plan: All line_19: SV Delta Plan: None ! question: 5 section: 2 line_1: All HRS internal SV tests should be run before this test. line_2: All HRS external target acquisition SV tests should be run before this test. ! question: 7 section: 1 line_1: Spectra will be reduced and analyzed with software developed by the HRS-IDT. line_3: No near-term changes/additions to the Project Data Base or PODPS pipeline will line_4: be required. ! !end of general form text general_form_address: lname: SAVAGE fname: BLAIR mi: D. category: CON inst: UNIV. OF WISCONSIN addr_1: 575 N. CHARTER ST. city: MADISON state: WI zip: 57306 country: USA phone: 608-262-4909 ! lname: CARPENTER fname: KENNETH mi: G. category: PI inst: LASP/NASA-GSFC addr_1: CODE 681 addr_2: GODDARD SPACE FLIGHT CENTER city: GREENBELT state: MD zip: 20771 country: USA phone: 301-286-3453 ! lname: EBBETS fname: DENNIS mi: C. category: CON inst: BALL AEROSPACE SYS. DIV. addr_1: P.O. 1062 city: BOULDER state: CO zip: 803061062 country: USA phone: 303-939-5964 ! lname: LINSKY fname: JEFFREY mi: L. category: CON inst: JILA/UNIV. OF COLORADO addr_1: CAMPUS BOX 440 city: BOULDER state: CO zip: 80309 country: USA phone: 303-492-7838 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: GAMMA-DRA name_2: HD164058 descr_1: K5III, descr_2: UV STANDARD pos_1: RA = 17H 56M 36.38S +/- 0.1S, pos_2: DEC = +51D 29' 20.6" +/- 0.1", pos_3: PLATE-ID=00T6 equinox: 2000 pm_or_par: Y pos_epoch_bj: B pos_epoch_yr: 1950.00 ra_pm_val: -0.002200 ra_pm_unct: 0.000067 dec_pm_val: -0.0230 dec_pm_unct: 0.0010 an_prlx_val: 0.0250 an_prlx_unct: 0.0050 rv_or_z: V = -28 fluxnum_1: 1 fluxval_1: V = 2.23+/-0.1, TYPE = K5III ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 targname: GAMMA-DRA config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-N2 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_3: FAINT=990, param_4: MAP=END-POINT req_1: ONBOARD ACQ FOR 1.2; req_2: CYCLE 0 / 1-8; req_3: SEQ 1.2-5.0 NO GAP; comment_1: EXPECT 200 COUNTS/SEC comment_2: STEP-TIME=200 MSEC. ! linenum: 1.200 targname: GAMMA-DRA config: HRS opmode: ACQ/PEAKUP aperture: 2.0 sp_element: MIRROR-N2 num_exp: 1 time_per_exp: 9.2S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 1.3,2,3,4,5; comment_1: STEP-TIME=200 MSEC, EXECUTE DEFCAL comment_2: AND LOCATE IN LSA. ! linenum: 1.300 targname: GAMMA-DRA config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 484.0S fluxnum_1: 1 priority: 1 comment_1: TAKE MAP AFTER CENTERING, comment_2: STEP-TIME=1.0 SEC. ! linenum: 1.500 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140L wavelength: 1200 num_exp: 1 time_per_exp: 4S priority: 1 param_1: STEP-PATT=1, param_2: STEP-TIME=1.0 req_2: CALIB FOR 2-5; ! linenum: 2.000 targname: GAMMA-DRA config: HRS opmode: ACCUM aperture: 2.0 sp_element: G140L wavelength: 1200 num_exp: 4 time_per_exp: 5M fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5 comment_1: USE MULTIPLE 5 MIN EXPOSURES DUE TO comment_2: MAGNETIC DRIFT. ! linenum: 3.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1400 num_exp: 3 time_per_exp: 5M fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 4.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1600 num_exp: 3 time_per_exp: 5M fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 5.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1800 num_exp: 3 time_per_exp: 5M fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 5.500 targname: GAMMA-DRA config: FOS/BL opmode: ACQ/PEAK aperture: 4.3 sp_element: G190H num_exp: 1 time_per_exp: 1S priority: ^ req_1: ONBOARD ACQ FOR 6; req_2: SPATIAL SCAN; ! linenum: 6.000 targname: GAMMA-DRA config: FOS/BL opmode: ACQ/PEAK aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 1S fluxnum_1: 1 priority: ^ req_1: ONBOARD ACQ FOR 7; req_2: SPATIAL SCAN; ! linenum: 7.000 targname: ^ config: ^ opmode: ^ aperture: 0.3 sp_element: ^ num_exp: 1 time_per_exp: 1S fluxnum_1: 1 priority: ^ param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.2, req_1: ONBOARD ACQ FOR 8; ! linenum: 8.000 targname: ^ config: ^ opmode: ACCUM aperture: 1.0 sp_element: G130H num_exp: 1 time_per_exp: 2000S fluxnum_1: 1 priority: ^ ! ! end of exposure logsheet scan_data: line_list: 5.5 fgs_scan: cont_dwell: D dwell_pnts: 6 dwell_secs: 1.00 scan_width: 4.3000 scan_length: 7.0000 sides_angle: 90.0000 number_lines: 2 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 3.5 wid_offset: 2.15 ! line_list: 6.0 fgs_scan: cont_dwell: D dwell_pnts: 6 dwell_secs: 1.00 scan_width: 0.7000 scan_length: 3.5000 sides_angle: 90.0000 number_lines: 2 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 1.75 wid_offset: 0.35 ! ! end of scan data