!  File:  1356C.PROP
!  Database:  PEPDB
!  Date:  16-FEB-1994:15:27:39

coverpage:

  title_1:         HRS INTERMEDIATE RESOLUTION CALIBRATION, STABILITY,
    title_2:       AND DIGICON 1 LINEARITY CALIBRATION
    sci_cat:       CALIBRATION
    proposal_for:  SV/HRS
    pi_fname:      BLAIR
    pi_mi:         D.
    pi_lname:      SAVAGE
    pi_inst:       UNIV. OF WISCONSIN
    pi_country:    USA
    pi_phone:      608-262-4900
    hours_pri:     6.60
    num_pri:       1
    hrs:           Y
! end of coverpage

abstract:

    line_1:        This proposal defines a test to evaluate the HRS intermediate
    line_2:        resolution and wavelength calibration and their stability.
    line_3:        Measurements in the large and small aperture will be evaluated.

!
! end of abstract

general_form_proposers:

  lname:           MARAN
    fname:         S.
    mi:            P.
    inst:          GFSC/NASA
    country:       USA

!

  lname:           BRANDT
    fname:         J.
    mi:            C.
    inst:          GFSC/NASA
    country:       USA

!

  lname:           SAVAGE
    fname:         BLAIR
    mi:            D.
    inst:          UNIV. OF WISCONSIN
    country:       USA

!

  lname:           LINSKY
    fname:         J.
    mi:            L.
    inst:          JILA/UNIV. OF COLORADO
    country:       USA

!

  lname:           CARPENTER
    fname:         K.
    mi:            G.
    inst:          LASP/NASA-GSFC
    country:       USA

!

  lname:           EBBETS
    fname:         DENNIS
    mi:            C.
    inst:          BALL AEROSPACE SYSTEMS DIV.
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        Description of proposed observations:
    line_2:        Observe Mu col (HD38666) as follows:
    line_3:        1. Acquire target using on-board acquisition.
    line_4:        2. Center in LSA and make focus diode aperture map.
    line_5:        3. Obtain G140L spectra as follows:
    line_6:        8 carrousel settings on 100 A centers (1100,1200,...1800A),
    line_7:        2 substeps/diode, integrations <=5 s/substep
    line_9:        4. Obtain G140M spectra as follows:
    line_10:       42 carrousel settings on 15 A centers (1090, 1105, 1120,...1705A)
    line_11:       2 substeps/diode, integrations <=5 s/substep Lambda>1200 and
    line_12:       <=15 s/substep for Lambda<1200.
    line_13:       10 percent integration time on background.
    line_14:       5. Switch to detector 2.  Scan nominal wave. ranges+extrema point
    line_15:       6. Repeat step 4 for G160M except use 39 carrousel settings on
    line_16:       20 A centers (1160,1180,...1900; 2160A).
    line_17:       7. Repeat step 4 for G200M except use 38 carrousel settings on
    line_18:       20 A centers (1600; 1780,1800,...2500;  2600A)
    line_19:       8. Repeat step 4 for G270M except use 46 carrousel settings on
    line_20:       25 A centers (1900; 2300,2325,...3400A).
    line_21:       9. Make ST SAM followed by target acquisition peak up to center
    line_22:       target in small aperture.
    line_23:       10.Spectral data acquisition with G270M of object and

!

  question:        3
    section:       2
    line_1:        SC1 calibration lamp as follows:
    line_2:        a. 16 carrousel settings on 100 A centers (1900,2000,...3400A).
    line_3:        b. 2 substeps/diode 5 s/substep
    line_4:        c. ~10 percent of integration time on background.
    line_5:        11.Repeat 10 for G200M at 11 carrousel settings on 100 A centers
    line_6:        (1600,1700,...2600A).
    line_7:        12.Repeat 10 for G160M at 10 carrousel setting on 100 A centers
    line_8:        (1200, 1300,....2100A).
    line_9:        13.Switch to detector 1.
    line_10:       14.Repeat 10 for G140M at 8 carrousel settings on 75 A centers
    line_11:       (1150, 1225, 1300,....1675A).
    line_12:       On the repeat visit, repeat steps 10 to 14 and obtain large
    line_13:       aperture spectra of the object at the set up wavelengths
    line_14:       listed in steps 10 to 14.

!

  question:        5
    section:       1
    line_1:        First measurements should be obtained after successful completion
    line_2:        of tests HRS1354 and HRS1355. The  repeat should occur at least
    line_3:        30 days after the first visit.
    line_5:        SV MINIMUM PLAN:  ALL
    line_6:        SV DELTA PLAN:  NONE
    line_7:        GUIDING TOLERANCE:  0.025 arcsec

!

  question:        5
    section:       2
    line_1:
    line_2:        (The following comment moved from exposure logsheet line 15):
    line_4:        Observations of (exposure logsheet) lines 15-20 are to be obtained on the
    line_5:        revisit to MU-COL, more than 30 days after lines 1-14.02.
    line_8:        The HRS is operated outside of nominal wavelength range.

!

  question:        7
    section:       1
    line_1:        Data will be reduced at GSFC, BASD, or the Univ. of Wisconsin.
    line_2:        The data will be used to obtain the following:
    line_3:        1. absolute and relative sensitivity for the G140M, G160M,
    line_4:        G200M, G270M modes
    line_5:        2. small aperture light loss for each intermediate resolution mode
    line_6:        3. wavelength calibration for each intermediate resolution mode
    line_7:        4. stability of the photometric and wavelength calibration
    line_8:        5. Digicon 1 non-linearity information.

!
!end of general form text

general_form_address:

  lname:           MARAN
    fname:         STEPHEN
    category:      CON
    inst:          NASA/GSFC
    addr_1:        CODE 680
    city:          GREENBELT
    state:         MD
    zip:           20771
    country:       USA
    phone:         301-344-8607

!

  lname:           SAVAGE
    fname:         BLAIR
    category:      PI
    inst:          UNIV OF WISCONSIN
    addr_1:        DEPT. OF ASTRONOMY
    city:          MADISON
    state:         WI
    zip:           53706
    country:       USA

!

  lname:           CARPENTER
    fname:         KENNETH
    category:      CON
    inst:          LASP/NASA-GSFC
    addr_1:        CODE 681
    city:          GREENBELT
    state:         MD
    zip:           20771
    country:       USA
    phone:         301-286-3453

!

  lname:           EBBETS
    fname:         DENNIS
    mi:            C
    category:      CON
    inst:          BALL AEROSPACE SYS. DIV.
    addr_1:        P.O. BOX 1062
    city:          BOULDER
    state:         CO
    zip:           803061062
    country:       USA
    phone:         303-939-5964

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        MU-COL
    name_2:        HD38666
    descr_1:       PHOTOMETRIC STANDARD
    pos_1:         RA=5H 45M 59.92S +/-0.01S,
    pos_2:         DEC=-32D 18' 22.8" +/-0.16",
    pos_3:         PLATE-ID=01WB
    equinox:       2000
    pm_or_par:     Y
    pos_epoch_yr:  1950.00
    ra_pm_val:     0.000267
    ra_pm_unct:    0.000267
    dec_pm_val:    -0.0250
    dec_pm_unct:   0.0030
    fluxnum_1:     1
    fluxval_1:     V=5.17,TYPE=O9.5V
    fluxnum_2:     2
    fluxval_2:     B-V=-0.28

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       0.200
    sequence_1:    DEF HRS10
    targname:      MU-COL
    config:        HRS
    opmode:        ACCUM
    aperture:      0.25
    sp_element:    #
    wavelength:    1000
    num_exp:       1
    time_per_exp:  28.8S
    fluxnum_1:     1
    priority:      1
    param_1:       METER=YES,
    param_2:       METER-WAVE=DEF,
    param_3:       METER-WIDTH=64,
    param_4:       LOW-RATE=0.0,
    param_5:       HIGH-COUNT=60000,
    param_6:       STEP-PATT=4
    req_1:         SEQ 0.2 - 0.3 NON-INT;
    comment_1:     30000 CTS/SUBSTEP OR MAX OF
    comment_2:     10 S/SUBSTEP.  MAXIMUM = 8 COMPLETE
    comment_3:     PATTERNS.

!

    linenum:       0.300
    sequence_1:    DEF HRS10
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC1
    sp_element:    #
    wavelength:    1000
    num_exp:       1
    time_per_exp:  20S
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=2
    req_1:         CALIB FOR 0.2

!

    linenum:       1.000
    targname:      MU-COL
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  57.8S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       SEARCH-SIZE=5,
    param_3:       BRIGHT=25000,
    param_4:       FAINT=150
    req_1:         ONBOARD ACQ FOR 2-6;
    req_2:         CYCLE 0 / 1-14.02;
    comment_1:     CENTER IN LARGE APERTURE AND
    comment_2:     OBTAIN APERTURE IMAGE WITH
    comment_3:     FOCUS DIODE. STEP-TIME=0.2

!

    linenum:       2.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G140L
    wavelength:    1050-1850
    num_exp:       1
    time_per_exp:  16S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=100,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=2,
    param_7:       HIGH-COUNT=480000
    req_1:         GROUP 2-6 WITHIN 3D;
    comment_1:     IN 2 WE ARE REQUESTING 8 CARROUSEL
    comment_2:     SETTINGS ON 100A CENTERS, WITH LAMBDA
    comment_3:     CENTER=1100,1200,...,1800A. INTEGRATE
    comment_4:     VIA EXPOSURE METER CONTROL FOR
    comment_5:     FOR 30000 CTS/SUBSTEP FOR A MAXIMUM
    comment_6:     INTEGRATION TIME OF 1.0S/SUBSTEP.

!

    linenum:       3.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G140M
    wavelength:    1082.5-1712.5
    num_exp:       1
    time_per_exp:  1512S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=15,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=2520000
    comment_1:     42 SETTINGS ON 15A CENTERS:1090
    comment_2:     1105,...,1705A. INTEGRATE FOR 30000
    comment_3:     CTS PER SUBSTEP OR MAX OF 16 SEC
    comment_4:     PER SUBSTEP. EXPECT 1500 CTS/SEC
    comment_5:     AT 1500A. MAXIMUM=8 COMPLETE
    comment_6:     PATTERNS.

!

    linenum:       4.000
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      ^
    sp_element:    G160M
    wavelength:    1150-1910
    num_exp:       1
    time_per_exp:  1094.4S
    fluxnum_1:     ^
    priority:      ^
    param_1:       WAVE-STEP=20,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=2280000
    comment_1:     SWITCH TO DETECTOR 2. 38 CARROUSEL
    comment_2:     SETTINGS ON 20A CENTERS:1160,1180,
    comment_3:     .....,1900A. EXPOSURE METER CONTROL
    comment_4:     FOR 30000 CTS/SUBSTEP OR A MAX TIME
    comment_5:     OF 12.8 SECS/SUBSTEP. MAXIMUM=8
    comment_6:     COMPLETE PATTERNS.

!

    linenum:       4.500
    targname:      ^
    config:        ^
    opmode:        ACCUM
    aperture:      ^
    sp_element:    G160M
    wavelength:    2160
    num_exp:       1
    time_per_exp:  28.8S
    fluxnum_1:     ^
    priority:      ^
    param_1:       HIGH-COUNT=60000,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,

!

    linenum:       4.800
    targname:      MU-COL
    config:        HRS
    opmode:        ACCUM
    aperture:      2.0
    sp_element:    G200M
    wavelength:    1600
    num_exp:       1
    time_per_exp:  28.8S
    fluxnum_1:     1
    priority:      1
    param_1:       HIGH-COUNT=60000,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,

!

    linenum:       5.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G200M
    wavelength:    1790-2510
    num_exp:       1
    time_per_exp:  1036.8S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=20,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=2160000
    comment_1:     36 CARR SETTINGS ON 20A CENTERS=1800,
    comment_2:     1820,..,2500. INTEGRATE UNDER EXP
    comment_3:     METER FOR 30000 CTS/SUBSTEP OR MAX OF
    comment_4:     12.8 S/SUBSTEP.  EXPECTED COUNT RATE
    comment_5:     IS 1300 CTS/SEC AT 2000A. MAX=8
    comment_6:     COMPLETE PATTERNS.

!

    linenum:       5.500
    targname:      MU-COL
    config:        HRS
    opmode:        ACCUM
    aperture:      2.0
    sp_element:    G200M
    wavelength:    2600
    num_exp:       1
    time_per_exp:  28.8S
    fluxnum_1:     1
    priority:      1
    param_1:       HIGH-COUNT=60000,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,

!

    linenum:       5.800
    targname:      MU-COL
    config:        HRS
    opmode:        ACCUM
    aperture:      2.0
    sp_element:    G270M
    wavelength:    1950
    num_exp:       1
    time_per_exp:  28.8S
    fluxnum_1:     1
    priority:      1
    param_1:       HIGH-COUNT=60000,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,

!

    linenum:       6.000
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G270M
    wavelength:    2287.5-3412.5
    num_exp:       1
    time_per_exp:  1296.0S
    fluxnum_1:     1
    priority:      1
    param_1:       WAVE-STEP=25,
    param_2:       METER=YES,
    param_3:       METER-WAVE=DEF,
    param_4:       METER-WIDTH=64,
    param_5:       LOW-RATE=0.0,
    param_6:       STEP-PATT=4,
    param_7:       HIGH-COUNT=2700000
    comment_1:     45 CARROUSEL SETTINGS ON 25A CENTERS,
    comment_2:     CENTERS=2300,2325,..,3400A.
    comment_3:     INTEGRATE UNDER EXPOSURE METER FOR
    comment_4:     30000 CTS/SUBSTEP OR MAX OF
    comment_5:     12.8 SECS/SUBSTEP. MAX=8 COMPLETE
    comment_6:     PATTERNS.

!

    linenum:       6.050
    targname:      MU-COL
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  57.8S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       BRIGHT=25000,
    param_3:       FAINT=150,
    param_4:       SEARCH-SIZE=5
    req_1:         ONBOARD ACQ FOR 6.1

!

    linenum:       6.100
    targname:      MU-COL
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  9.2S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 7.015-14.02;
    req_2:         REPEAT 6.05- 14.02 EVERY 35D +/-
    req_3:         5 D FOR 1 MORE TIME;
    comment_1:     SCHEDULE FIRST VISIT EARLY IN
    comment_2:     SV. SCHEDULE REVISIT AS SOON AS
    comment_3:     POSSIBLE AFTER 30 DAYS.

!

    linenum:       7.015
    targname:      MU-COL
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  25S
    priority:      1
    param_1:       NX=5,
    param_2:       NY=5,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=2,
    req_1:         SEQ 7.015-8.07 NO GAP;
    comment_1:     STEP-TIME=1.0

!

    linenum:       7.020
    sequence_1:    USE HRS10
    sp_element:    G270M
    wavelength:    X 1.95

!

    linenum:       7.030
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.0

!

    linenum:       7.040
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.1

!

    linenum:       7.050
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.2

!

    linenum:       7.060
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.3

!

    linenum:       7.070
    sequence_1:    USE HRS10
    sp_element:    G270M
    wavelength:    X 2.4

!

    linenum:       7.080
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.5

!

    linenum:       7.090
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.6

!

    linenum:       8.000
    sequence_1:    USE HRS10
    sp_element:    G270M
    wavelength:    X 2.7

!

    linenum:       8.010
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.8

!

    linenum:       8.020
    sequence_1:    USE HRS10
    sp_element:    G270M
    wavelength:    X 2.9

!

    linenum:       8.030
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 3.0

!

    linenum:       8.040
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 3.1

!

    linenum:       8.050
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 3.2

!

    linenum:       8.060
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 3.3

!

    linenum:       8.070
    sequence_1:    USE HRS10
    sp_element:    G270M
    wavelength:    X 3.4

!

    linenum:       8.080
    targname:      MU-COL
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  25S
    priority:      1
    param_1:       NX=5,
    param_2:       NY=5,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=2,
    comment_1:     STEP-TIME=1.0

!

    linenum:       9.000
    sequence_1:    USE HRS10
    sp_element:    G200M
    wavelength:    X 1.6
    req_1:         SEQ 8.08-10.04 NO GAP;

!

    linenum:       9.010
    sequence_1:    USE HRS10
    sp_element:    G200M
    wavelength:    X 1.7

!

    linenum:       9.020
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.8

!

    linenum:       9.030
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.9

!

    linenum:       9.040
    sequence_1:    USE HRS10
    sp_element:    G200M
    wavelength:    X 2.0

!

    linenum:       9.050
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.1

!

    linenum:       10.000
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.2

!

    linenum:       10.010
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.3

!

    linenum:       10.020
    sequence_1:    USE HRS10
    sp_element:    G200M
    wavelength:    X 2.4

!

    linenum:       10.030
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.5

!

    linenum:       10.040
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.6

!

    linenum:       10.050
    targname:      MU-COL
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  25S
    priority:      1
    param_1:       NX=5,
    param_2:       NY=5,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=2,
    comment_1:     STEP-TIME=1.0

!

    linenum:       11.000
    sequence_1:    USE HRS10
    sp_element:    G160M
    wavelength:    X 1.2
    req_1:         SEQ 10.05-12.04 NO GAP;

!

    linenum:       11.010
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.3

!

    linenum:       11.020
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.4

!

    linenum:       11.030
    sequence_1:    USE HRS10
    sp_element:    G160M
    wavelength:    X 1.5

!

    linenum:       11.040
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.6

!

    linenum:       12.000
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.7

!

    linenum:       12.010
    sequence_1:    USE HRS10
    sp_element:    G160M
    wavelength:    X 1.8

!

    linenum:       12.020
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.9

!

    linenum:       12.030
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 2.0

!

    linenum:       12.040
    sequence_1:    USE HRS10
    sp_element:    G160M
    wavelength:    X 2.1

!

    linenum:       12.050
    targname:      MU-COL
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  25S
    priority:      1
    param_1:       NX=5,
    param_2:       NY=5,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=2,
    comment_1:     STEP-TIME=1.0

!

    linenum:       13.000
    sequence_1:    USE HRS10
    sp_element:    G140M
    wavelength:    X 1.15
    req_1:         SEQ 12.05-14.02 NO GAP;

!

    linenum:       13.010
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.225

!

    linenum:       13.020
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.3

!

    linenum:       13.030
    sequence_1:    USE HRS10
    sp_element:    G140M
    wavelength:    X 1.375

!

    linenum:       13.040
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.45

!

    linenum:       14.000
    sequence_1:    USE HRS10
    sp_element:    G140M
    wavelength:    X 1.525

!

    linenum:       14.010
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.6

!

    linenum:       14.020
    sequence_1:    ^
    sp_element:    ^
    wavelength:    X 1.675

!

    linenum:       15.000
    sequence_1:    DEF SEQ
    targname:      MU-COL
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  57.8S
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       SEARCH-SIZE=5,
    param_3:       BRIGHT=25000,
    param_4:       FAINT=150
    req_1:         ONBOARD ACQ FOR 16-20
    comment_1:     STEP-TIME=0.2

!

    linenum:       16.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        WSCAN
    aperture:      ^
    sp_element:    G140L
    wavelength:    1050-1850
    num_exp:       1
    time_per_exp:  16S
    priority:      1
    param_1:       METER=YES,
    param_2:       METER-WAVE=DEF,
    param_3:       METER-WIDTH=64,
    param_4:       LOW-RATE=0.0,
    param_5:       STEP-PATT=2,
    param_6:       WAVE-STEP=100,
    param_7:       HIGH-COUNT=480000
    comment_1:     30000 CTS/SUBSTEP OR MAX OF
    comment_2:     1.0 S/SUBSTEP. 8 CARROUSEL POSITIONS,
    comment_3:     8 COMPLETE PATTERNS.

!

    linenum:       17.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      ^
    sp_element:    G140M
    wavelength:    1112.5-1712.5
    num_exp:       1
    time_per_exp:  230.4S
    priority:      1
    param_1:       METER=YES,
    param_2:       METER-WAVE=DEF,
    param_3:       METER-WIDTH=64,
    param_4:       LOW-RATE=0.0,
    param_5:       STEP-PATT=4,
    param_6:       WAVE-STEP=75,
    param_7:       HIGH-COUNT=480000
    comment_1:     30000 CTS/SUBSTEP OR MAX OF
    comment_2:     12.8 S/SUBSTEP. 8 CARROUSEL
    comment_3:     POSITIONS, 8 COMPLETE PATTERNS.

!

    linenum:       18.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      ^
    sp_element:    G160M
    wavelength:    1150-2150
    num_exp:       1
    time_per_exp:  288.0S
    priority:      1
    param_1:       METER=YES,
    param_2:       METER-WAVE=DEF,
    param_3:       METER-WIDTH=64,
    param_4:       LOW-RATE=0.0,
    param_5:       STEP-PATT=4,
    param_6:       WAVE-STEP=100,
    param_7:       HIGH-COUNT=600000
    comment_1:     SWITCH TO DETECTOR 1.
    comment_2:     30000 CTS/SUBSTEP OR MAX OF
    comment_3:     12.8 S/SUBSTEP. 10 CARROUSEL
    comment_4:     POSITIONS, 8 COMPLETE PATTERNS.

!

    linenum:       19.000
    sequence_1:    ^
    targname:      ^
    config:        ^
    opmode:        ^
    aperture:      ^
    sp_element:    G200M
    wavelength:    1550-2650
    num_exp:       1
    time_per_exp:  316.8S
    priority:      1
    param_1:       METER=YES,
    param_2:       METER-WAVE=DEF,
    param_3:       METER-WIDTH=64,
    param_4:       LOW-RATE=0.0,
    param_5:       STEP-PATT=4,
    param_6:       WAVE-STEP=100,
    param_7:       HIGH-COUNT=660000
    comment_1:     30000 CTS/SUBSTEP OR MAX OF
    comment_2:     12.8 S/SUBSTEP. 11 CARROUSEL
    comment_3:     POSITIONS, 8 COMPLETE PATTERNS.

!

    linenum:       20.000
    sequence_1:    DEF SEQ
    targname:      MU-COL
    config:        HRS
    opmode:        WSCAN
    aperture:      2.0
    sp_element:    G270M
    wavelength:    1850-3450
    num_exp:       1
    time_per_exp:  460.8S
    priority:      1
    param_1:       WAVE-STEP=100,METER=YES,
    param_2:       METER-WAVE=DEF,
    param_3:       METER-WIDTH=64,
    param_4:       LOW-RATE=0.0,
    param_5:       STEP-PATT=4,
    param_6:       HIGH-COUNT=960000
    comment_1:     30000 CTS/SUBSTEP OR MAX OF
    comment_2:     12.8 S/SUBSTEP. 16 CARROUSEL
    comment_3:     POSITIONS, 8 COMPLETE PATTERNS. LINES
    comment_4:     15-20 TO BE DONE DURING SECOND VISIT
    comment_5:     TO TARGET FOR RADIOMETRIC STABILITY
    comment_6:     CHECK.

!

    linenum:       29.000
    sequence_1:    USE SEQ
    req_1:         AFTER 6 BY 34D +/- 5D;

!
! end of exposure logsheet

! No scan data records found