! File: 1354C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:15:17:02 coverpage: title_1: HRS LOW RESOLUTION CALIBRATION AND STABILITY sci_cat: CALIBRATION proposal_for: SV/HRS pi_fname: BLAIR pi_mi: D. pi_lname: SAVAGE pi_inst: UNIVERSITY OF WISCONSIN pi_country: USA pi_phone: 608-262-0309 hours_pri: 1.80 num_pri: 1 hrs: Y ! end of coverpage abstract: line_1: This proposal defines a test to evaluate the photometric and wavelength line_2: calibration and off-spectrum background determination for the HRS low line_3: resolution mode (G140L) with the large and small apertures. The stability of line_4: the mode will also be evaluated. ! ! end of abstract general_form_proposers: lname: EBBETS fname: D. mi: C. inst: BASD country: USA ! lname: MARAN fname: S. mi: P. inst: NASA/GSFC country: USA ! lname: BRANDT fname: J. mi: C. inst: NASA/GSFC country: USA ! lname: SAVAGE fname: B. title: PI mi: D. inst: UNIVERSITY OF WISCONSIN country: USA ! lname: CARPENTER fname: K. mi: G. inst: LASP/NASA-GSFC country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: Use the following procedure for each of 3 visits: line_2: 1. Acquire using onboard acquisition. line_3: 2. Center in LSA and make aperture map line_4: 3. Obtain G140L data as follows: line_5: a. 8 carousel settings on 100A centers line_6: (1100, 1200, 1300, ... 1800) line_7: b. 2 substeps/diode, integrations from 5s - 50s/substep line_8: c. observe background ~10 percent of time with full array line_9: 4. Make small angle maneuver to center object in small aperture. line_10: 5. Peakup in small aperture line_11: 6. Repeat 3 for the small aperture once for object and once for calibration line_12: lamp (SC1). Do not move carousel between and SC1 observations. line_13: Run test with BD+75d 325. line_14: HD 49798 is a less desirable alternate. line_15: Use identical sequence for repeat observing. The repeat should be line_16: 30 - 40 days after the first observation. line_17: Program for HD 49798 (the alternate object) is identical to that for BD line_18: +75d 325. ! question: 4 section: 1 line_1: This program calibrates the HRS, which only operate with the ST. ! question: 5 section: 1 line_1: First test should be run after verifying the target acquisition tests line_2: ending with prop 1352. The repeat should occur 30 or more days following first line_3: measurement. line_4: SV Minimum Plan: All line_5: SV Delta Plan: None line_6: Guiding Tolerance: 0.025 arc seconds ! question: 7 section: 1 line_1: Data will be reduced at GSFC, BASD or University of Wisconsin. The observed line_2: count rates will be used to measure the absolute and relative response of the line_3: G140L mode. The data from the repeat visit will provide an indication of the line_4: stability of the calibration. The large and small aperture spectra will yield line_5: information on the small aperture light loss. ! question: 10 section: 1 line_1: Support through ST Project "contract" with the HRS IDT PI. ! question: 12 section: 1 line_1: The primary target is BD+75d 325. line_2: HD 49798 is a less desirable alternate. ! !end of general form text general_form_address: lname: MARAN fname: STEPHEN inst: GSFC addr_1: CODE 680 city: GREENBELT state: MD zip: 20771 country: USA phone: 301-344-8607 ! lname: EBBETS fname: DENNIS category: CON inst: BALL AEROSPACE SYS. GROUP addr_1: P.O. BOX 1062 city: BOULDER state: CO zip: 80306 country: USA phone: 303-939-5964 ! lname: SAVAGE fname: BLAIR mi: D. category: PI inst: UNIVERSITY OF WISCONSIN addr_1: DEPT. OF ASTRONOMY city: MADISON state: WI zip: 53706 country: USA phone: 608-262-0309 ! lname: CARPENTER fname: KENNETH inst: LASP addr_1: NASA - GODDARD SPACE FLIGHT CENTER addr_2: CODE 681 city: GREENBELT state: MD zip: 20771 country: USA phone: 301-286-3453 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: BD+75D325 name_2: GSC4380-2196 descr_1: PHOTOMETRIC STANDARD pos_1: RA = 8H 10M 49.31S +/- 0.5S, pos_2: DEC = +74D 57' 57.5" +/- 0.5", pos_3: PLATE-ID=00LQ equinox: 2000 pm_or_par: Y pos_epoch_bj: B pos_epoch_yr: 1983.80 ra_pm_val: -0.000467 ra_pm_unct: 0.000400 dec_pm_val: 0.0120 dec_pm_unct: 0.0100 fluxnum_1: 1 fluxval_1: V = 9.54,TYPE=SD0 fluxnum_2: 2 fluxval_2: B-V=0.37 ! targnum: 2 name_1: HD49798 descr_1: PHOTOMETRIC STANDARD pos_1: RA = 6H 48M 04.64S +/- 0.5S, pos_2: DEC = -44D 18' 59.3" +/- 0.5", pos_3: PLATE-ID=01VX equinox: 2000 pm_or_par: Y pos_epoch_yr: 1980.00 ra_pm_val: 0.000800 ra_pm_unct: 0.000800 dec_pm_val: 0.0020 dec_pm_unct: 0.0120 comment_1: HD 49798 IS A LESS DESIRABLE comment_2: ALTERNATE TARGET. fluxnum_1: 1 fluxval_1: V = 8.27,TYPE=SDO fluxnum_2: 2 fluxval_2: B-V=0.30 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: SEQ targname: # config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 289S priority: # param_1: # req_1: ONBOARD ACQ FOR 2-9; req_2: SEQ 1-9 NO GAP; req_3: GROUP 1-24 WITHIN 24H; comment_1: CENTER IN LARGE APERTURE AND OBTAIN comment_2: APERTURE IMAGE WITH FOCUS DIODE. ! linenum: 2.000 sequence_1: ^ targname: ^ config: HRS opmode: ACCUM aperture: 2.0 sp_element: G140L wavelength: 1100 num_exp: 1 time_per_exp: 28.0S priority: # param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=40000 ! linenum: 3.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1200 num_exp: 1 time_per_exp: 14.4S priority: # param_1: ^ ! linenum: 4.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1300 num_exp: 1 time_per_exp: 14.4S priority: # param_1: ^ ! linenum: 5.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1400 num_exp: 1 time_per_exp: 14.4S priority: # param_1: ^ ! linenum: 6.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1500 num_exp: 1 time_per_exp: 14.4S priority: # param_1: ^ ! linenum: 7.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1600 num_exp: 1 time_per_exp: 18.0S priority: # param_1: ^ ! linenum: 8.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1700 num_exp: 1 time_per_exp: 36.0S priority: # param_1: ^ ! linenum: 9.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ wavelength: 1800 num_exp: 1 time_per_exp: 90.0S priority: # param_1: ^ ! linenum: 9.500 sequence_1: DEFINE sequence_2: SEQ targname: # config: HRS opmode: ACQ/PEAKUP aperture: 0.25 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 46S priority: # req_1: SEQ 9.5-24 NO GAP; req_2: ONBOARD ACQ FOR 10-24; ! linenum: 10.000 sequence_1: DEFINE sequence_2: SEQ targname: # config: HRS opmode: ACCUM aperture: 0.25 sp_element: G140L wavelength: 1100 num_exp: 1 time_per_exp: 36.0S priority: # param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=40000 ! linenum: 12.000 sequence_1: ^ targname: # config: ^ opmode: ^ aperture: 0.25 sp_element: ^ wavelength: 1200 num_exp: 1 time_per_exp: 28.0S priority: # param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=40000 ! linenum: 14.000 sequence_1: ^ targname: # config: ^ opmode: ^ aperture: 0.25 sp_element: ^ wavelength: 1300 num_exp: 1 time_per_exp: 14.4S priority: # param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=40000 ! linenum: 16.000 sequence_1: ^ targname: # config: ^ opmode: ^ aperture: 0.25 sp_element: ^ wavelength: 1400 num_exp: 1 time_per_exp: 14.4S priority: # param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=40000 ! linenum: 17.000 sequence_1: ^ targname: WAVE config: ^ opmode: ^ aperture: SC1 sp_element: ^ wavelength: 1400 num_exp: 1 time_per_exp: 28.0S priority: # param_1: STEP-PATT=2 req_1: CALIB FOR 16 ! linenum: 18.000 sequence_1: ^ targname: # config: ^ opmode: ^ aperture: 0.25 sp_element: ^ wavelength: 1500 num_exp: 1 time_per_exp: 14.4S priority: # param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=40000 ! linenum: 20.000 sequence_1: DEFINE sequence_2: SEQ targname: # config: HRS opmode: ACCUM aperture: 0.25 sp_element: G140L wavelength: 1600 num_exp: 1 time_per_exp: 28.0S priority: # param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=40000 ! linenum: 22.000 sequence_1: ^ targname: # config: ^ opmode: ^ aperture: 0.25 sp_element: ^ wavelength: 1700 num_exp: 1 time_per_exp: 46.8S priority: # param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=40000 ! linenum: 24.000 sequence_1: ^ targname: # config: ^ opmode: ^ aperture: 0.25 sp_element: ^ wavelength: 1800 num_exp: 1 time_per_exp: 115.2S priority: # param_1: STEP-PATT=4, param_2: METER=YES, param_3: HIGH-COUNT=40000 ! linenum: 26.000 sequence_1: USE sequence_2: SEQ targname: BD+75D325 time_per_exp: X1.0 priority: 1 param_1: MAP=END-POINT, param_2: SEARCH-SIZE=5, param_3: BRIGHT=35000, param_4: FAINT=2000, req_1: SELECT 1 OF 26-27 OR 29-30; req_2: COND IF TARGET AVAILABLE DURING SV; req_3: CYCLE 0 / 26-30; comment_1: THIS IS THE PRIMARY TARGET. THE comment_2: ALTERNATE TARGET SHOULD BE USED ONLY comment_3: IF ABSOLUTELY NECESSARY. comment_4: STEP-TIME=1, ! linenum: 27.000 sequence_1: ^ targname: ^ priority: 1 param_1: ^ req_1: AFTER 26 BY 35D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 29.000 sequence_1: USE sequence_2: SEQ targname: HD49798 time_per_exp: X1.0 priority: 1 param_1: MAP=END-POINT, param_2: SEARCH-SIZE=5, param_3: BRIGHT=DEF, param_4: FAINT=5000 req_1: COND IF TARGET VISIBLE DURING SV AND req_2: PRIMARY TARGET IS UNAVAILABLE; comment_1: STEP-TIME=1, ! linenum: 30.000 sequence_1: USE sequence_2: SEQ targname: HD49798 time_per_exp: X1.0 priority: 1 param_1: MAP=END-POINT, param_2: SEARCH-SIZE=5, param_3: BRIGHT=DEF, param_4: FAINT=5000, req_1: AFTER 29 BY 35D; req_2: COND IF TARGET VISIBLE DURING SV AND req_3: PRIMARY TARGET IS UNAVAILABLE; ! ! end of exposure logsheet ! No scan data records found