!  File:  1352C.PROP
!  Database:  PEPDB
!  Date:  16-FEB-1994:15:11:31

coverpage:

  title_1:         MODE II TARGET ACQUISITION - TARGET LOCATE
    sci_cat:       CALIBRATION
    proposal_for:  SV/HRS
    pi_fname:      DENNIS
    pi_lname:      EBBETS
    pi_inst:       BALL AEROSPACE SYSTEMS GROUP
    pi_country:    USA
    keywords_1:    HRS, SCIENCE VERIFICATION
    hours_pri:     1.00
    num_pri:       1
    hrs:           Y
! end of coverpage

abstract:

    line_1:        SV test to demonstrate all aspects of the Target Locate phase of Mode II target
    line_2:        acquisition.

!
! end of abstract

general_form_proposers:

  lname:           WARNOCK
    fname:         ARCHIE
    inst:          GODDARD SPACE FLIGHT CENTER
    country:       USA

!

  lname:           GARNER
    fname:         HARRY
    inst:          BALL AEROSPACE SYSTEMS GROUP
    country:       USA

!

  lname:           EBBETS
    fname:         DENNIS
    inst:          BALL AEROSPACE SYSTEMS GROUP
    country:       USA

!

  lname:           TUFFLI
    fname:         ANDREA
    inst:          BALL AEROSPACE SYSTEMS GROUP
    country:       USA

!

  lname:           TROELTZSCH
    fname:         JOHN
    inst:          BALL AEROSPACE SYSTEMS GROUP
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        The telescope will be pointed to place the star in or near
    line_2:        the Large Science Aperture. The flight software will execute a spiral search
    line_3:        using flux limits determined from the previous test (1351). A field map will
    line_4:        be produced after the target is detected. It will be centered in the LSA,
    line_5:        followed by another field map to check the centering. Three short exposure
    line_6:        spetra with grating G140L will be taken. The star will then be translated to
    line_7:        the Small Science Aperture, followed by a peakup and field map. The same three
    line_8:        spectra will confirm the presence of the star in the aperture, and will measure
    line_9:        the fraction of light lost at the aperture as a function of wavelength. This
    line_10:       process will then be repeated using one of the detector D2 acquisition mirrors,
    line_11:       probably A2. This process must be verified for each detector because the
    line_12:       maneuvers required to center the target are calculated sligtly differently for
    line_13:       the two sides.
    line_14:       Detailed Procedure (added from IDT Test Description):
    line_16:       1. Search phase 1 - spiral and stop, no maps N1 or A1
    line_17:       Locate phase 3 - map, then center in LSA
    line_18:       2. Locate phase 2 - map (after centered) flux check
    line_19:       3. G140L spectra central wavelengths = 1250, 1500, 1750 through LSA
    line_20:       4. Locate phase 1 - center in LSA
    line_21:       Move to SSA, peakup, flux check
    line_22:       5. Map SSA in Image mode
    line_23:       6. G140L spectra central wavelengths = 1250, 1500, 1750 through SSA

!

  question:        3
    section:       2
    line_1:        7. Reposition telescope to inital pointing
    line_2:        8. Switch to detector D2, mirror A2
    line_3:        9. Search phase 1, spiral and stop, no maps
    line_4:        Locate phase 3 - map, then center in LSA
    line_5:        10. Locate phase 2 - map LSA (after centering)
    line_6:        11. G160M spectra central wavelength = 1340 through LSA
    line_7:        12. Locate phase 1 - center in LSA
    line_8:        Move to SSA, peakup, flux check
    line_9:        13. Map SSA in Image mode
    line_10:       14. G160M spectra central wavelength = 1340 through SSA

!

  question:        5
    section:       1
    line_1:        Prerequisites:
    line_3:        OV 1350 TA Spiral Search Test
    line_4:        must be successfully completed prior to attempting
    line_5:        target locate. At least 2 weeks should be allowed between
    line_6:        the Spiral Search and Locate tests to provide for repeat of
    line_7:        Spiral Search, if necessary.
    line_9:        SV Minimum Plan:  ALL
    line_10:       SV Delta Plan:    NONE
    line_11:       Guiding Tolerance: 0.025 arc seconds

!

  question:        7
    section:       1
    line_1:        Target acquisition maps and flux measurements will be analyzed off-line to
    line_2:        verify proper centering in each aperture.
    line_4:        G140L spectra will be ratioed to estimate fraction of light transmitted by
    line_5:        small science aperture as a function of wavelength.

!

  question:        10
    section:       1
    line_1:        Data analysis facilities
    line_2:        Personnel
    line_3:        Travel and Publications support

!
!end of general form text

general_form_address:

  lname:           EBBETS
    fname:         DENNIS
    category:      PI
    inst:          BALL AEROSPACE
    addr_1:        P.O.BOX 1062
    city:          BOULDER
    state:         CO
    zip:           80306
    country:       USA
    phone:         301-338-1437

!

  lname:           TROELTZSCH
    fname:         JOHN
    category:      CON
    inst:          BALL AEROSPACE
    addr_1:        P.O.BOX 1062
    city:          BOULDER
    state:         CO
    zip:           80306
    country:       USA
    phone:         301-338-4587

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        HD93205
    descr_1:       MEMBER OF CLOSE PAIR OF STARS USED FOR
    descr_2:       MODE II TESTS
    pos_1:         RA = 10H 44M 33.76S +/- 0.5S,
    pos_2:         DEC = -59D 44' 15.6" +/- 3.0",
    pos_3:         PLATE-ID=06A6
    equinox:       2000
    pm_or_par:     NO
    pos_epoch_yr:  1987.10
    ra_pm_val:     0.001000
    ra_pm_unct:    0.000467
    dec_pm_val:    -0.0030
    dec_pm_unct:   0.0070
    fluxnum_1:     1
    fluxval_1:     V = 7.75
    fluxnum_2:     2
    fluxval_2:     F-CONT(1250) = 4.5 E-11

!

    targnum:       2
    name_1:        HD210839
    name_2:        LAMBDA CEP
    descr_1:       PRIMARY TARGET
    pos_1:         RA=22H 11M 30.62S +/-.01S,
    pos_2:         DEC=+59D 24' 51.0" +/- 1",
    pos_3:         PLATE-ID=02X2
    equinox:       2000
    pm_or_par:     NO
    pos_epoch_yr:  1950.00
    ra_pm_val:     0.000067
    ra_pm_unct:    0.000267
    dec_pm_val:    -0.0060
    dec_pm_unct:   0.0030
    fluxnum_1:     1
    fluxval_1:     V=5.08
    fluxnum_2:     2
    fluxval_2:     B-V=+0.25

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       5.000
    sequence_1:    DEFINE
    sequence_2:    SPECT
    targname:      #
    config:        HRS
    opmode:        WSCAN
    aperture:      #
    sp_element:    G140L
    wavelength:    1125-1875
    num_exp:       1
    time_per_exp:  108S
    s_to_n:        110
    fluxnum_1:     2
    priority:      1
    param_1:       STEP-PATT=4,
    param_3:       WAVE-STEP=250,
    comment_1:     CENTRAL WAVELENGTHS = 1250, 1500,
    comment_2:     1750.

!

    linenum:       5.500
    sequence_1:    DEFINE
    sequence_2:    SPECT-A
    targname:      #
    config:        HRS
    opmode:        WSCAN
    aperture:      #
    sp_element:    G140L
    wavelength:    1125-1875
    num_exp:       1
    time_per_exp:  86.4S
    s_to_n:        110
    fluxnum_1:     2
    priority:      1
    param_1:       STEP-PATT=4,
    param_3:       WAVE-STEP=250,
    comment_1:     CENTRAL WAVELENGTHS = 1250, 1500,
    comment_2:     1750.

!

    linenum:       6.000
    targname:      HD93205
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  289.0S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       LOCATE=YES,
    param_3:       BRIGHT=DEF,
    param_4:       SEARCH-SIZE=5,
    param_5:       FAINT=40,
    req_1:         ONBOARD ACQ FOR 6.5;
    req_2:         GROUP 6-13 WITHIN 24H;
    req_3:         SELECT 1 OF 6-13 OR 15-23;
    req_4:         COND IF PRIME TARGET
    req_5:         IS NOT AVAILABLE / 6-13;
    req_6:         CYCLE 0 / 6-23;
    comment_1:     EXECUTE SEARCH PHASE 1, LOCATE PHASE
    comment_2:     3-MAP BEFORE CENTERING. NOTE PARAMS
    comment_3:     FOR MAPS IN LINE 6 & 6.5 ARE:
    comment_4:     STEP-TIME=1.0, FOCUS=YES,
    comment_5:     PRECISION=NORMAL, NX=22, NY=22,
    comment_6:     DELTAX=4, DELTAY=4.

!

    linenum:       6.500
    targname:      HD93205
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  264S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       LOCATE=NO,
    param_3:       SEARCH-SIZE=1,
    req_1:         ONBOARD ACQ FOR 7;
    comment_1:     EXECUTE LOCATE PHASE 2, MAP LSA, FLUX
    comment_2:     CHECK.

!

    linenum:       7.000
    sequence_1:    USE SPECT
    targname:      HD93205
    aperture:      2.0
    req_1:         SEQ 6-9 NO GAP;

!

    linenum:       8.000
    targname:      HD93205
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  46.0S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 8.5;
    comment_1:     EXECUTE LOCATE PHASE 1, MOVE TO SSA,
    comment_2:     CLOSE SHUTTER, PEAKUP, FLUX CHECK.

!

    linenum:       8.500
    targname:      HD93205
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  484.0S
    fluxnum_1:     1
    priority:      1
    param_2:       DELTA-X=1,
    param_3:       DELTA-Y=1,
    param_4:       NX=22,
    param_5:       NY=22,
    param_6:       PRECISION=HIGH,

!

    linenum:       9.000
    sequence_1:    USE SPECT
    targname:      HD93205
    aperture:      0.25

!

    linenum:       10.000
    targname:      HD93205
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A2
    num_exp:       1
    time_per_exp:  57.8S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       LOCATE=YES, BRIGHT=DEF,
    param_3:       SEARCH-SIZE=5,
    param_4:       FAINT=400,
    req_1:         ONBOARD ACQ FOR 10.5;
    req_2:         SAME POS FOR 10 AS 6;
    comment_1:     EXECUTE SEARCH PHASE 1, LOCATE PHASE
    comment_2:     3-MAP BEFORE CENTERING. NOTE PARAMS
    comment_3:     FOR MAPS IN LINE 10 & 10.5 ARE:
    comment_4:     STEP-TIME=0.2, FOCUS=YES,
    comment_5:     PRECISION=NORMAL, NX=22, NY=22,
    comment_6:     DELTA-X=4, DELTA-Y=4.

!

    linenum:       10.500
    targname:      HD93205
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A2
    num_exp:       1
    time_per_exp:  53S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       LOCATE=NO,
    param_3:       SEARCH-SIZE=1,
    req_1:         ONBOARD ACQ FOR 11;
    comment_1:     EXECUTE LOCATE PHASE 2, MAP LSA, FLUX
    comment_2:     CHECK.

!

    linenum:       11.000
    targname:      HD93205
    config:        HRS
    opmode:        ACCUM
    aperture:      2.0
    sp_element:    G160M
    wavelength:    1300
    num_exp:       1
    time_per_exp:  115.2S
    s_to_n:        50
    fluxnum_1:     2
    priority:      1
    param_1:       STEP-PATT=4,
    req_1:         SEQ 10-13 NO GAP;

!

    linenum:       12.000
    targname:      HD93205
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      0.25
    sp_element:    MIRROR-A2
    num_exp:       1
    time_per_exp:  9.2S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 12.5;
    comment_1:     EXECUTE LOCATE PHASE 1, MOVE TO SSA,
    comment_2:     CLOSE SHUTTER, PEAKUP, FLUX CHECK.

!

    linenum:       12.500
    targname:      HD93205
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-A2
    num_exp:       1
    time_per_exp:  96.8S
    fluxnum_1:     1
    priority:      1
    param_2:       DELTA-X=1,
    param_3:       DELTA-Y=1,
    param_4:       NX=22,
    param_5:       NY=22,
    param_6:       PRECISION=HIGH,

!

    linenum:       13.000
    targname:      HD93205
    config:        HRS
    opmode:        ACCUM
    aperture:      0.25
    sp_element:    G160M
    wavelength:    1300
    num_exp:       1
    time_per_exp:  115.2S
    s_to_n:        40
    fluxnum_1:     2
    priority:      1
    param_1:       STEP-PATT=4,

!

    linenum:       15.000
    targname:      HD210839
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  1325S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,

!

    linenum:       16.000
    targname:      HD210839
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  57.8S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       LOCATE=YES,
    param_3:       BRIGHT=DEF,
    param_4:       SEARCH-SIZE=5,
    param_5:       FAINT=30,
    req_1:         ONBOARD ACQ FOR 16.5;
    req_3:         COND IF PRIME TARGET
    req_4:         AVAILABLE / 15-23;
    req_5:         AFTER 15 BY 12H +/- 12H;
    comment_1:     EXECUTE SEARCH PHASE 1, LOCATE PHASE
    comment_2:     3-MAP BEFORE CENTERING. NOTE PARAMS
    comment_3:     FOR MAPS IN LINE 16 & 16.5 ARE:
    comment_4:     STEP-TIME=0.2, FOCUS=YES,
    comment_5:     PRECISION=NORMAL, NX=22, NY=22,
    comment_6:     DELTAX=4, DELTAY=4.

!

    linenum:       16.200
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       FORMAT=FN,
    req_1:         PAR WITH 16;
    comment_1:     COLLECT 32K DATA TO MONITOR SLEWS
    comment_2:     DURING ACQ PROCESS. DURATION SHOULD
    comment_3:     COVER THE TIME REQUIRED TO COMPLETE
    comment_4:     THE ACQUISITION ON LINE 16.

!

    linenum:       16.500
    targname:      HD210839
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  53S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       LOCATE=NO,
    param_3:       SEARCH-SIZE=1,
    req_1:         ONBOARD ACQ FOR 17;
    comment_1:     EXECUTE LOCATE PHASE 2, MAP LSA, FLUX
    comment_2:     CHECK.

!

    linenum:       17.000
    sequence_1:    USE
    sequence_2:    SPECT-A
    targname:      HD210839
    aperture:      2.0
    req_1:         SEQ 16-19 NO GAP;

!

    linenum:       18.000
    targname:      HD210839
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  9.2S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 18.5;
    comment_1:     EXECUTE LOCATE PHASE 1, MOVE TO SSA,
    comment_2:     CLOSE SHUTTER, PEAKUP, FLUX CHECK.

!

    linenum:       18.500
    targname:      HD210839
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-A1
    num_exp:       1
    time_per_exp:  96.8S
    fluxnum_1:     1
    priority:      1
    param_2:       DELTA-X=1,
    param_3:       DELTA-Y=1,
    param_4:       NX=22,
    param_5:       NY=22,
    param_6:       PRECISION=HIGH,

!

    linenum:       19.000
    sequence_1:    USE
    sequence_2:    SPECT-A
    targname:      HD210839
    aperture:      0.25

!

    linenum:       19.500
    targname:      HD210839
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A2
    num_exp:       1
    time_per_exp:  1325S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,

!

    linenum:       20.000
    targname:      HD210839
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A2
    num_exp:       1
    time_per_exp:  57.8S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       LOCATE=YES, BRIGHT=DEF,
    param_3:       SEARCH-SIZE=5,
    param_4:       FAINT=1000,
    req_1:         ONBOARD ACQ FOR 20.5;
    req_2:         AFTER 19.5 BY 12H +/- 12H;
    comment_1:     EXECUTE SEARCH PHASE 1, LOCATE PHASE
    comment_2:     3-MAP BEFORE CENTERING. NOTE PARAMS
    comment_3:     FOR MAPS IN LINE 20 & 20.5 ARE:
    comment_4:     STEP-TIME=0.2, FOCUS=YES,
    comment_5:     PRECISION=NORMAL, NX=22, NY=22,
    comment_6:     DELTA-X=4, DELTA-Y=4.

!

    linenum:       20.200
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       FORMAT=FN,
    req_1:         PAR WITH 20;
    comment_1:     COLLECT 32K DATA TO MONITOR SLEWS
    comment_2:     DURING ACQ PROCESS. DURATION SHOULD
    comment_3:     COVER THE TIME REQUIRED TO COMPLETE
    comment_4:     THE ACQUISITION ON LINE 20.

!

    linenum:       20.500
    targname:      HD210839
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-A2
    num_exp:       1
    time_per_exp:  53S
    fluxnum_1:     1
    priority:      1
    param_1:       MAP=END-POINT,
    param_2:       LOCATE=NO,
    param_3:       SEARCH-SIZE=1,
    req_1:         ONBOARD ACQ FOR 21;
    comment_1:     EXECUTE LOCATE PHASE 2, MAP LSA, FLUX
    comment_2:     CHECK.

!

    linenum:       21.000
    targname:      HD210839
    config:        HRS
    opmode:        ACCUM
    aperture:      2.0
    sp_element:    G160M
    wavelength:    1340
    num_exp:       1
    time_per_exp:  115.2S
    s_to_n:        50
    fluxnum_1:     2
    priority:      1
    param_1:       STEP-PATT=4,
    req_1:         SEQ 20-23 NO GAP;

!

    linenum:       22.000
    targname:      HD210839
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      0.25
    sp_element:    MIRROR-A2
    num_exp:       1
    time_per_exp:  9.2S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 22.5;
    comment_1:     EXECUTE LOCATE PHASE 1, MOVE TO SSA,
    comment_2:     CLOSE SHUTTER, PEAKUP, FLUX CHECK.

!

    linenum:       22.500
    targname:      HD210839
    config:        HRS
    opmode:        IMAGE
    aperture:      0.25
    sp_element:    MIRROR-A2
    num_exp:       1
    time_per_exp:  96.8S
    fluxnum_1:     1
    priority:      1
    param_2:       DELTA-X=1,
    param_3:       DELTA-Y=1,
    param_4:       NX=22,
    param_5:       NY=22,
    param_6:       PRECISION=HIGH,

!

    linenum:       23.000
    targname:      HD210839
    config:        HRS
    opmode:        ACCUM
    aperture:      0.25
    sp_element:    G160M
    wavelength:    1340
    num_exp:       1
    time_per_exp:  115.2S
    s_to_n:        40
    fluxnum_1:     2
    priority:      1
    param_1:       STEP-PATT=4,

!
! end of exposure logsheet

! No scan data records found