! File: 1314C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:13:22:50 coverpage: title_1: FOS-V7 TARGET ACQUISITION - FAINT OBJECTS proposal_for: SV/FOS pi_fname: HOLLAND pi_lname: FORD pi_inst: SPACE TELESCOPE SCIENCE INSTITUTE pi_country: USA pi_phone: 301-338-4803 num_pri: 2 fos: Y pi_position: HOLLAND FORD ! end of coverpage abstract: line_1: A test will be performed to verify the binary search target line_2: acquisition software of the FOS, as well as the firmware line_3: acquisition. The test will first image a faint (V ~ 20) star line_4: in the large aperture, and then allow the firmware/software line_5: to attempt to center the object. A second image will be line_6: obtained to check on the centering, and a prism spectrum will line_7: be obtained to be certain the correct object was centered. line_8: The test will be repeated to test for repeatability. line_10: This program (along with the other target acquisition tests) line_11: is the highest priority SV activity to be performed. ! ! end of abstract general_form_proposers: lname: ANGEL fname: ROGER inst: UNIVERSITY OF ARIZONA country: USA ! lname: MARGON fname: BRUCE inst: UNIVERSITY OF WASHINGTON country: USA ! lname: BARTKO fname: FRANK inst: MARTIN MARIETTA CORPORATION country: USA ! lname: DAVIDSEN fname: ARTHUR inst: JOHNS HOPKINS UNIVERSITY country: USA ! lname: HARMS fname: RICHARD inst: APPLIED RESEARCH CORPORATION country: USA ! lname: BOHLIN fname: RALPH inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! lname: FORD fname: HOLLAND title: PI inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! lname: BURBIDGE fname: E. mi: M. inst: UNIVERSITY OF CALIFORNIA, SAN DIEGO country: USA ! lname: BEAVER fname: EDWARD inst: UNIVERSITY OF CALIFORNIA, SAN DIEGO country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: In this test, we will observed one (1) faint object to verify line_2: the functionality of the binary search target acquisiton line_3: software of the FOS, as well as the firmware acquisition. We line_4: will observe the object in the camera mode to check on its line_5: initial position, then let the software/firmware attempt to line_6: center the object, and take a second picture to see how line_7: accurately it was centered. Finally, a prism spectrum will line_8: be obtained to be certain the correct object was centered. ! question: 5 section: 1 line_1: SV Prerequisites: line_2: initial verification of target acquisition software/firmware line_3: in Combined Mode II Target Acquisition Tests (Prop 2195) line_4: performed at least 14 days prior to this test. line_6: Minimum/Delta Plan objects: line_7: All observations are SV Minimum plan. line_9: Alternate Targets: line_10: Firmware: NGC2287-5, NGC6752-WD2, DF-13 line_11: Binary Search: PG1115+080, CL4 line_13: This activity can be accomplished in PCS Coarse Track Mode, line_14: if necessary with pointing stability requirements of 10% of line_15: the smallest aperture (1.0") used = 0.1". line_16: Note that the initial Binary Search and Firmware observations line_17: should be performed within 1 day of each other. Due to the line_18: use of alternate targets, implementation of this request in line_19: the exposure logsheet was not attempted. ! question: 6 section: 1 line_1: This test is not stray light sensitive. ! question: 7 section: 1 line_1: Data reduction will be performed at the STScI, and the line_2: analysis will be performed using FOS IDT computer facilities. line_3: Since this test is strictly a verification, no pipeline line_4: calibration data will be obtained. ! question: 10 section: 1 line_1: Data analysis, research assistant support, and funding will line_2: be provided under NASA's FOS GTO contract(s). ! !end of general form text general_form_address: lname: FORD fname: HOLLAND category: PI inst: SPACE TELESCOPE SCIENCE INSTITUTE addr_1: HOMEWOOD CAMPUS city: BALTIMORE state: MD zip: 21218 country: USA phone: 301-338-4803 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: NGC6752-WD2 descr_1: FAINT DA3 WHITE DWARF PHOTOMETRIC STANDARD descr_2: IN NGC 6752. pos_1: RA = 19H 12M 53.6S +/- 0.01S, pos_2: DEC = -60D 01' 32.5" +/- 0.1" equinox: 2000 fluxnum_1: 1 fluxval_1: V = 20.70 +/- 0.1 fluxnum_2: 2 fluxval_2: B = 20.62 +/- 0.1 ! targnum: 2 name_1: NGC2287-5 descr_1: DA2 WHITE DWARF PHOTOMETRIC STANDARD. pos_1: RA = 06H 46M 24.6S +/- 0.01S, pos_2: DEC = -20D 46' 10.3" +/- 0.1" equinox: 2000 fluxnum_1: 1 fluxval_1: V = 20.1 +/- 0.5 ! targnum: 3 name_1: CL4 descr_1: QUASAR WITH CLOSE COMPANION pos_1: RA=20H 50M 51.048S +/- 0.005S, pos_2: DEC=+31D 27' 27.66" +/- 0.01" equinox: 2000 comment_1: THE COORDS ARE FOR THE MID- comment_2: POINT OF CL4 AND STAR A. fluxnum_1: 1 fluxval_1: V=21 +/- 1 ! targnum: 4 name_1: PG1115+080 descr_1: QUASAR WITH 2 CLOSE COMPONENTS pos_1: RA= 11H 18M 16.9S +/- 0.01S, pos_2: DEC= +07D 45' 58.6" +/- 0.1" equinox: 2000 comment_1: THE MAIN LENS IMAGE. fluxnum_1: 1 fluxval_1: V=16.3 +/- 0.5 ! targnum: 5 name_1: PG1115-FIELD descr_1: MIDPOINT OF PG1115+080 IMAGES pos_1: R = 1.18", pos_2: PA = 307D, pos_3: FROM 4 equinox: 2000 fluxnum_1: 1 fluxval_1: V=18.2 +/- 0.5 ! targnum: 6 name_1: DF-13 descr_1: FAINT QUASAR pos_1: RA= 00H 18M 24.2S +/- 0.01S, pos_2: DEC= +15D 40' 17.4" +/- 0.1", pos_3: PLATE-ID=00GQ equinox: 2000 fluxnum_1: 1 fluxval_1: V=19.4 +/- 1.0 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 0.250 sequence_1: DEFINE sequence_2: IMAGE targname: # config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 1S fluxnum_1: 1 priority: 1 ! linenum: 0.500 sequence_1: DEF sequence_2: PKUPA targname: # config: # opmode: ACQ/PEAK aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, req_1: SPATIAL SCAN; ! linenum: 0.750 sequence_1: DEF sequence_2: PKUPB targname: # config: # opmode: ACQ/PEAK aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 1S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, req_1: SPATIAL SCAN; ! linenum: 1.000 sequence_1: DEFINE sequence_2: NGC22-5 targname: NGC2287-5 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 72S fluxnum_1: 1 priority: 1 req_1: SEQ 1-4 NO GAP; ! linenum: 2.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ/FIRMWARE aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 180S fluxnum_1: 1 priority: 1 param_1: MAP=BOTH, param_2: BRIGHT=91000, param_3: FAINT=272, req_1: ONBOARD ACQ FOR 3-4; ! linenum: 3.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 72S fluxnum_1: 1 priority: 1 ! linenum: 4.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 315S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. FIRMWARE, comment_4: PRIME OBJECT. ! linenum: 5.000 sequence_1: DEFINE sequence_2: WD targname: NGC6752-WD2 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 128S fluxnum_1: 1 priority: 1 req_1: SEQ 5-8 NO GAP; ! linenum: 6.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ/FIRMWARE aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 320S fluxnum_1: 1 priority: 1 param_1: MAP=BOTH, param_2: BRIGHT=91000, req_1: ONBOARD ACQ FOR 7-8; ! linenum: 7.000 sequence_1: DEFINE sequence_2: WD targname: NGC6752-WD2 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 128S fluxnum_1: 1 priority: 1 ! linenum: 8.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 490S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. FIRMWARE, comment_4: BACKUP OBJECT. ! linenum: 9.000 sequence_1: DEFINE sequence_2: DF targname: DF-13 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 110S fluxnum_1: 1 priority: 1 req_1: SEQ 9-12 NO GAP; ! linenum: 10.000 sequence_1: DEFINE sequence_2: DF targname: DF-13 config: # opmode: ACQ/FIRMWARE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 275S fluxnum_1: 1 priority: 1 param_1: MAP=BOTH req_1: ONBOARD ACQ FOR 11-12; ! linenum: 11.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 110S fluxnum_1: 1 priority: 1 ! linenum: 12.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 490S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. FIRMWARE, comment_4: BACKUP OBJECT. ! linenum: 13.000 sequence_1: DEFINE sequence_2: CL4 targname: CL4 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 460S fluxnum_1: 1 priority: 1 req_1: SEQ 13-16 NO GAP; ! linenum: 14.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ/BINARY aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 792S fluxnum_1: 1 priority: 1 param_1: NTHSTAR=2, param_2: BRIGHT=720000, req_1: ONBOARD ACQ FOR 15-16; ! linenum: 15.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 460S fluxnum_1: 1 priority: 1 ! linenum: 16.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 975S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. BINARY comment_4: SEARCH, BACKUP OBJECT. ! linenum: 17.000 sequence_1: DEFINE sequence_2: PG targname: PG1115+080 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 7S fluxnum_1: 1 priority: 1 req_1: SEQ 17-22 NO GAP; ! linenum: 18.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ/BINARY aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 69S fluxnum_1: 1 priority: 1 param_1: BRIGHT=330000, param_2: FAINT=4048, req_1: ONBOARD ACQ FOR 19; ! linenum: 19.000 sequence_1: ^ sequence_2: ^ targname: PG1115-FIELD config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 7S fluxnum_1: 1 priority: 1 ! linenum: 20.000 sequence_1: DEFINE sequence_2: PG targname: PG1115-FIELD config: # opmode: ACQ/BINARY aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 69S fluxnum_1: 1 priority: 1 param_1: NTHSTAR=2, param_2: BRIGHT=330000, param_3: FAINT=2420, req_1: ONBOARD ACQ FOR 21-22; ! linenum: 21.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 7S fluxnum_1: 1 priority: 1 ! linenum: 22.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 244S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. BINARY comment_4: SEARCH, PRIME OBJECT. comment_5: SEARCHING FOR OBJECT B. ! linenum: 50.000 sequence_1: USE sequence_2: IMAGE targname: NGC2287-5 config: FOS/RD time_per_exp: X72 req_1: CYCLE 0/50-122; req_2: SELECT 1 OF 50-55 OR req_3: 60-65 OR 70-75; req_4: COND IF TARGET AVAILABLE DURING SV req_5: /50-51;GROUP 50-51 WITHIN 3H; ! linenum: 50.500 sequence_1: USE sequence_2: NGC22-5-1 config: FOS/RD ! linenum: 50.750 sequence_1: USE sequence_2: IMAGE targname: NGC2287-5 config: FOS/BL time_per_exp: X144 ! linenum: 51.000 sequence_1: USE sequence_2: NGC22-5-1 config: FOS/BL time_per_exp: X2 ! linenum: 52.000 sequence_1: USE sequence_2: NGC22-5 config: FOS/RD req_1: AFTER 50 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 53.000 sequence_1: ^ sequence_2: ^ config: FOS/BL time_per_exp: X2 req_1: AFTER 52 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 54.000 sequence_1: ^ sequence_2: ^ config: FOS/RD req_1: AFTER 53 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 55.000 sequence_1: ^ sequence_2: ^ config: FOS/BL time_per_exp: X2 req_1: AFTER 54 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; comment_1: FIRMWARE, PRIME TARGET. ! linenum: 60.000 sequence_1: USE sequence_2: IMAGE targname: NGC6752-WD2 config: FOS/RD time_per_exp: X128 req_1: COND IF TARGET AVAILABLE DURING SV req_2: /60-61;GROUP 60-61 WITHIN 3H; ! linenum: 60.500 sequence_1: USE sequence_2: WD-1 config: FOS/RD ! linenum: 60.750 sequence_1: USE sequence_2: IMAGE targname: NGC6752-WD2 config: FOS/BL time_per_exp: X256 ! linenum: 61.000 sequence_1: USE sequence_2: WD-1 config: FOS/BL time_per_exp: X2 ! linenum: 62.000 sequence_1: USE sequence_2: WD config: FOS/RD req_1: AFTER 60 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 63.000 sequence_1: ^ sequence_2: ^ config: FOS/BL time_per_exp: X2 req_1: AFTER 62 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 64.000 sequence_1: USE sequence_2: WD config: FOS/RD req_1: AFTER 63 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 65.000 sequence_1: ^ sequence_2: ^ config: FOS/BL time_per_exp: X2 req_1: AFTER 64 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; comment_1: FIRMWARE, BACKUP OBJECT. ! linenum: 70.000 sequence_1: USE sequence_2: IMAGE targname: DF-13 config: FOS/RD time_per_exp: X110 req_1: COND IF TARGET AVAILABLE DURING SV req_2: /70-71;GROUP 70-71 WITHIN 3H; ! linenum: 70.500 sequence_1: USE sequence_2: DF-1 config: FOS/RD ! linenum: 70.750 sequence_1: USE sequence_2: IMAGE targname: DF-13 config: FOS/BL time_per_exp: X220 ! linenum: 71.000 sequence_1: USE sequence_2: DF-1 config: FOS/BL time_per_exp: X2 ! linenum: 72.000 sequence_1: USE sequence_2: DF config: FOS/RD req_1: AFTER 70 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 73.000 sequence_1: ^ sequence_2: ^ config: FOS/BL time_per_exp: X2 req_1: AFTER 72 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 74.000 sequence_1: ^ sequence_2: ^ config: FOS/RD req_1: AFTER 73 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 75.000 sequence_1: USE sequence_2: DF config: FOS/BL time_per_exp: X2 req_1: AFTER 74 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; comment_1: FIRMWARE, BACKUP OBJECT. ! linenum: 80.000 sequence_1: USE sequence_2: IMAGE targname: PG1115+080 config: FOS/RD time_per_exp: X7 req_1: SELECT 1 OF 80-85 OR req_2: 90-95; req_3: COND IF TARGET AVAILABLE DURING SV req_4: /80-81;GROUP 80-81 WITHIN 3H; ! linenum: 80.500 sequence_1: USE sequence_2: PG-1 config: FOS/RD ! linenum: 80.750 sequence_1: USE sequence_2: IMAGE targname: PG1115+080 config: FOS/BL time_per_exp: X14 ! linenum: 81.000 sequence_1: USE sequence_2: PG-1 config: FOS/BL time_per_exp: X2 ! linenum: 82.000 sequence_1: USE sequence_2: PG config: FOS/RD req_1: AFTER 80 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 83.000 sequence_1: ^ sequence_2: ^ config: FOS/BL time_per_exp: X2 req_1: AFTER 82 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 84.000 sequence_1: ^ sequence_2: ^ config: FOS/RD req_1: AFTER 83 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 85.000 sequence_1: ^ sequence_2: ^ config: FOS/BL time_per_exp: X2 req_1: AFTER 84 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; comment_1: BINARY SEARCH, PRIME OBJECT. ! linenum: 90.000 sequence_1: USE sequence_2: IMAGE targname: CL4 config: FOS/RD time_per_exp: X460 req_1: COND IF TARGET AVAILABLE DURING SV req_2: /90-91;GROUP 90-91 WITHIN 3H; ! linenum: 90.500 sequence_1: USE sequence_2: CL4-1 config: FOS/RD ! linenum: 90.750 sequence_1: USE sequence_2: IMAGE targname: CL4 config: FOS/BL time_per_exp: X920 ! linenum: 91.000 sequence_1: USE sequence_2: CL4-1 config: FOS/BL time_per_exp: X2 ! linenum: 92.000 sequence_1: USE sequence_2: CL4 config: FOS/RD req_1: AFTER 90 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 93.000 sequence_1: USE sequence_2: CL4 config: FOS/BL time_per_exp: X2 req_1: AFTER 92 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 94.000 sequence_1: ^ sequence_2: ^ config: FOS/RD req_1: AFTER 93 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; ! linenum: 95.000 sequence_1: ^ sequence_2: ^ config: FOS/BL time_per_exp: X2 req_1: AFTER 94 BY 7D; req_2: COND IF TARGET AVAILABLE DURING SV; comment_1: BINARY SEARCH, BACKUP OBJECT. ! linenum: 100.500 sequence_1: DEF sequence_2: NGC22-5-1 targname: NGC2287-5 config: # opmode: ACQ/PEAK aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, req_1: SPATIAL SCAN; req_2: ONBOARD ACQ FOR 101-102; ! linenum: 101.000 sequence_1: DEFINE sequence_2: NGC22-5-1 targname: NGC2287-5 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 72S fluxnum_1: 1 priority: 1 req_1: SEQ 100.5-104 NO GAP; ! linenum: 102.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ/FIRMWARE aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 180S fluxnum_1: 1 priority: 1 param_1: MAP=BOTH, param_2: BRIGHT=91000, param_3: FAINT=272, req_1: ONBOARD ACQ FOR 103-104; ! linenum: 103.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 72S fluxnum_1: 1 priority: 1 ! linenum: 104.000 sequence_1: DEFINE sequence_2: NGC22-5-1 targname: NGC2287-5 config: # opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 315S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. FIRMWARE, comment_4: PRIME OBJECT. ! linenum: 104.500 sequence_1: DEF sequence_2: WD-1 targname: NGC6752-WD2 config: # opmode: ACQ/PEAK aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, req_1: SPATIAL SCAN; req_2: ONBOARD ACQ FOR 105-106; ! linenum: 105.000 sequence_1: DEFINE sequence_2: WD-1 targname: NGC6752-WD2 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 128S fluxnum_1: 1 priority: 1 req_1: SEQ 104.5-108 NO GAP; ! linenum: 106.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ/FIRMWARE aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 320S fluxnum_1: 1 priority: 1 param_1: MAP=BOTH, param_2: BRIGHT=91000, req_1: ONBOARD ACQ FOR 107-108; ! linenum: 107.000 sequence_1: DEFINE sequence_2: WD-1 targname: NGC6752-WD2 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 128S fluxnum_1: 1 priority: 1 ! linenum: 108.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 490S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. FIRMWARE, comment_4: BACKUP OBJECT. ! linenum: 108.500 sequence_1: DEF sequence_2: DF-1 targname: DF-13 config: # opmode: ACQ/PEAK aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, req_1: SPATIAL SCAN; req_2: ONBOARD ACQ FOR 109-110; ! linenum: 109.000 sequence_1: DEFINE sequence_2: DF-1 targname: DF-13 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 110S fluxnum_1: 1 priority: 1 req_1: SEQ 108.5-112 NO GAP; ! linenum: 110.000 sequence_1: DEFINE sequence_2: DF-1 targname: DF-13 config: # opmode: ACQ/FIRMWARE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 275S fluxnum_1: 1 priority: 1 param_1: MAP=BOTH req_1: ONBOARD ACQ FOR 111-112; ! linenum: 111.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 110S fluxnum_1: 1 priority: 1 ! linenum: 112.000 sequence_1: DEFINE sequence_2: DF-1 targname: DF-13 config: # opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 490S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. FIRMWARE, comment_4: BACKUP OBJECT. ! linenum: 112.500 sequence_1: DEF sequence_2: CL4-1 targname: CL4 config: # opmode: ACQ/PEAK aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, req_1: SPATIAL SCAN; req_2: ONBOARD ACQ FOR 113-114; ! linenum: 113.000 sequence_1: DEFINE sequence_2: CL4-1 targname: CL4 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 460S fluxnum_1: 1 priority: 1 req_1: SEQ 112.5-116 NO GAP; ! linenum: 114.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ/BINARY aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 792S fluxnum_1: 1 priority: 1 param_1: NTHSTAR=2, param_2: BRIGHT=720000, req_1: ONBOARD ACQ FOR 115-116; ! linenum: 115.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 460S fluxnum_1: 1 priority: 1 ! linenum: 116.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 975S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. BINARY comment_4: SEARCH, BACKUP OBJECT. ! linenum: 116.750 sequence_1: DEF sequence_2: PG-1 targname: PG1115+080 config: # opmode: ACQ/PEAK aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 1S fluxnum_1: 1 priority: 1 param_1: TYPE=UP, req_1: SPATIAL SCAN; req_2: ONBOARD ACQ FOR 117-118; ! linenum: 117.000 sequence_1: DEFINE sequence_2: PG-1 targname: PG1115+080 config: # opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 7S fluxnum_1: 1 priority: 1 req_1: SEQ 116.75-122 NO GAP; ! linenum: 118.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ/BINARY aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 69S fluxnum_1: 1 priority: 1 param_1: BRIGHT=330000, param_2: FAINT=4048, req_1: ONBOARD ACQ FOR 119; ! linenum: 119.000 sequence_1: ^ sequence_2: ^ targname: PG1115-FIELD config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 7S fluxnum_1: 1 priority: 1 ! linenum: 120.000 sequence_1: DEFINE sequence_2: PG-1 targname: PG1115-FIELD config: # opmode: ACQ/BINARY aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 69S fluxnum_1: 1 priority: 1 param_1: NTHSTAR=2, param_2: BRIGHT=330000, param_3: FAINT=2420, req_1: ONBOARD ACQ FOR 121-122; ! linenum: 121.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACQ aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 7S fluxnum_1: 1 priority: 1 ! linenum: 122.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ACCUM aperture: 1.0 sp_element: PRISM num_exp: 1 time_per_exp: 244S fluxnum_1: 1 priority: 1 comment_1: THE INTEGRATION TIMES ARE comment_2: FOR THE RED SIDE. FOR THE comment_3: BLUE, USE X2. BINARY comment_4: SEARCH, PRIME OBJECT. comment_5: SEARCHING FOR OBJECT B. ! ! end of exposure logsheet scan_data: line_list: 100.500,104.5,108.5,112.5,116.750 fgs_scan: cont_dwell: D dwell_pnts: 2 dwell_secs: 1.00 scan_width: 7.0000 scan_length: 4.3000 sides_angle: 90.0000 number_lines: 6 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 2.15 wid_offset: 3.5 ! ! end of scan data