! File: 2842C.PROP ! Database: PEPDB ! Date: 17-FEB-1994:18:05:16 coverpage: title_1: ECHELLE PHOTOMETRIC SENSITIVITY sci_cat: CALIBRATION proposal_for: CAL/HRS pi_fname: RONALD pi_mi: L. pi_lname: GILLILAND pi_inst: ST SCI pi_country: USA pi_phone: (301)338-4454 keywords_1: HRS, CALIBRATION, CYCLE 1 hours_pri: 3.80 num_pri: 1 hrs: Y pi_position: GHRS INST SCI ! end of coverpage abstract: line_1: CYCLE 1 calibration of Echelle sensitivity using standard star. line_2: This is a repeat of SV 1357 to maintain radiometric calibration. ! ! end of abstract general_form_proposers: lname: GILLILAND fname: RONALD title: PI mi: L. inst: ST SCI country: USA ! lname: DUNCAN fname: DOUGLAS mi: K. inst: ST SCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: Mu-Col will be acquired using mirror A1, and centered in the Large Science line_2: Aperture. A field map will be taken to confirm the centering. The carousel line_3: will be rotated to position Echelle a at the peak of the blaze sensitivity line_4: =mLambda=56200. Observations of orders 47-33 will be made with four samples per line_5: resolution element and two samples on the interorder background. The shutter line_6: will be closed and spectral lamp SCI will be measured at the same wavelengths. line_7: The star will be translated to the Small Aperture, and the same sequence of line_8: observations repeated. It will then be returned to the Large Aperture, and all line_9: fifteen orders will be measured at each of three other carousel line_10: positions. The four carousel positions will be at line_11: approximately mLambda=55600, 56200, 57200 and 57800. The same type of sequence line_12: will be repeated with Echelle B and detector D2. ! question: 3 section: 2 line_1: NOTE to exposure log lines: Exposure time has the following line_2: derivation. This is exactly what we want implemented: line_4: STEP-PATT=7 => 4 bins on spectrum, repeat code=1 line_5: 2 bins on background, repeat code=8 line_6: ------ line_7: 34 integrations per pattern line_8: * 0.2 sec per integration line_9: ------ line_10: 6.8 sec per pattern line_11: * 4 patterns line_12: ------ line_13: 27.2 sec for Ech-A line_15: 6.8 sec per pattern line_16: * 2 patterns line_17: ------ line_18: 13.6 sec for Ech-B ! question: 3 section: 3 line_1: Mu COL will have been used in tests HRS-03 (prop 1349) to line_2: calibrate camera mirror sensitivities. If those results line_3: show that mirror A2 can be used lines 14, 15, 18, 18.5, 20, and line_4: 20.5 will use A2. Current estimates are that A2 will line_5: saturate the detectors and A1 may have to be used. A1 count line_6: rate= 6700 cts/sec an A2 count rate=380,000 cts/sec. line_8: Default values for ACQ and IMAGE mode map parameters will be okay. line_9: Exposure times have been changed to agree with use of OSCAN mode; line_10: i.e. all 15 orders constitute one "exposure" with a "time per line_11: exposure" of 15 * 27.2 = 408 seconds. ! question: 5 section: 1 line_1: Prerequisites: line_2: 1. HRS-05.2 Mode II Target Acquisition-Target Locate (Prop 1352) line_3: 2. HRS-i9.6 Echelle A Spectral Lamp Mini-Functional (OV Prop 1368) line_4: 3. HRS-i9.7 Echelle B Spectral Lamp Mini-Functional (OV Prop 1369) line_6: The HRS is intentionally operated outside of the normal wavelength line_7: ranges for the following lines: line_9: line echelle central wavelength line_11: 10,11 a33 1733 line_12: 12,13 a33 1752 line_13: 25,26 b18 3278 line_17: guiding Tolerance: 0.025 arc seconds ! question: 7 section: 1 line_1: Photometric sesitivities vs. order number will be derived for the balze maximum line_2: of each order. Results will be entered into calibration data base for reduction line_3: of raw data. ! question: 10 section: 1 line_1: Data Analysis line_2: Personnel ! !end of general form text general_form_address: lname: GILLILAND fname: RONALD mi: L category: PI inst: ST SCI addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA ! lname: DUNCAN fname: DOUGLAS mi: K. inst: ST SCI country: USA phone: 301-338-4454 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: MU-COL descr_1: PRIMARY SPECTROPHOTOMETRIC STANDARD pos_1: RA=5H45M59.92S +/- 0.5S, pos_2: DEC=-32D18'23.4" +/- 3.0" equinox: 2000 pm_or_par: NO comment_1: COORDINATES FROM SAO CATALOG fluxnum_1: 1 fluxval_1: V=5.17,TYPE=09.5 IV, E(B-V)=0.02 fluxnum_2: 2 fluxval_2: F-CONT(1300)=2.4E-9 fluxnum_3: 3 fluxval_3: F-CONT(2300)=5.0E-10 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 targname: MU-COL config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: MAP=END-POINT, param_2: FAINT=200.0,BRIGHT=DEF req_1: ONBOARD ACQ FOR 3-5; req_2: GROUP 1-12 WITHIN 7D; ! linenum: 3.000 targname: ^ config: ^ opmode: OSCAN aperture: ^ sp_element: ECH-A wavelength: 1703.03 num_exp: 1 time_per_exp: 408 S s_to_n: 88 fluxnum_1: 2 priority: ^ param_1: STEP-PATT=7, OSCAN-MIN=33, param_2: OSCAN-MAX=47 req_1: SEQ 3-6 NO GAP comment_1: OSCAN CONSISTS OF 15 ORDERS WITH comment_2: 27.2 SECOND EXP TIME ON EACH ORDER. ! linenum: 4.000 targname: WAVE config: ^ opmode: ^ aperture: SC1 sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: CALIB FOR 3 NO SLEW; comment_1: DO NOT MOVE CARROUSEL BETWEEN 3 AND 4. ! linenum: 5.000 targname: MU-COL config: ^ opmode: ACQ/PEAKUP aperture: 0.25 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 9.2S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 5.5-6; comment_1: MOVE TO SMALL APERTURE, PEAKUP, FLUX comment_2: CHECK. ! linenum: 5.500 targname: ^ config: ^ opmode: IMAGE aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: 1 ! linenum: 6.000 targname: ^ config: ^ opmode: OSCAN aperture: 0.25 sp_element: ECH-A wavelength: 1703.03 num_exp: 1 time_per_exp: 408 S s_to_n: 60 fluxnum_1: 2 priority: ^ param_1: STEP-PATT=7, OSCAN-MIN=33, param_2: OSCAN-MAX=47 comment_1: POSITION CARROUSEL FOR comment_2: MLAMBDA=56200 FOR LINES 3,4,6. comment_3: SEE NOTE IN GENERAL FORM PARA comment_4: 3. ! linenum: 7.000 targname: MU-COL config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: MAP=END-POINT, param_2: FAINT=200.0,BRIGHT=DEF req_1: ONBOARD ACQ FOR 8-12; ! linenum: 8.000 targname: MU-COL config: HRS opmode: OSCAN aperture: 2.0 sp_element: ECH-A wavelength: 1684.848 num_exp: 1 time_per_exp: 408 S s_to_n: 88 fluxnum_1: 2 priority: 1 param_1: STEP-PATT=7, OSCAN-MIN=33, param_2: OSCAN-MAX=47 comment_1: POSITION CARROUSEL FOR comment_2: M-LAMBDA=55600 FOR 8 ! linenum: 10.000 targname: MU-COL config: HRS opmode: OSCAN aperture: 2.0 sp_element: ECH-A wavelength: 1733.333 num_exp: 1 time_per_exp: 408 S s_to_n: 88 fluxnum_1: 2 priority: 1 param_1: STEP-PATT=7, OSCAN-MIN=33, param_2: OSCAN-MAX=47 comment_1: POSITION CARROUSEL FOR comment_2: M-LAMBDA=57200. ! linenum: 12.000 targname: MU-COL config: HRS opmode: OSCAN aperture: 2.0 sp_element: ECH-A wavelength: 1751.515 num_exp: 1 time_per_exp: 408 S s_to_n: 88 fluxnum_1: 2 priority: 1 param_1: STEP-PATT=7, OSCAN-MIN=33, param_2: OSCAN-MAX=47 comment_1: POSITION CARROUSEL FOR comment_2: M-LAMBDA=57800. ! linenum: 14.000 targname: MU-COL config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: MAP=END-POINT, param_2: FAINT=6000,BRIGHT=DEF req_1: ONBOARD ACQ FOR 16-18; req_2: GROUP 14-25 WITHIN 7D; comment_1: EXECUTE SEARCH PHASE 1, LOCATE PHASE comment_2: 3, FLUX CHECK. OPEN SHUTTER FOR 14, comment_3: 16. ! linenum: 16.000 targname: ^ config: ^ opmode: OSCAN aperture: ^ sp_element: ECH-B wavelength: 3122.222 num_exp: 1 time_per_exp: 217.6S s_to_n: 100 fluxnum_1: 3 priority: 1 param_1: STEP-PATT=7, OSCAN-MIN=18, param_2: OSCAN-MAX=33 req_1: SEQ 16-19 NO GAP; comment_1: POSITION CARROUSEL FOR comment_2: MLAMBDA=56200 FOR 16,17,19. comment_3: OSCAN CONSISTS OF 16 ORDERS WITH 13.6 comment_4: SEC EXP TIME ON EACH ORDER. ! linenum: 17.000 targname: WAVE config: ^ opmode: ^ aperture: SC1 sp_element: ^ wavelength: ^ num_exp: ^ time_per_exp: ^ priority: ^ param_1: ^ req_1: CALIB FOR 16 NO SLEW; comment_1: DO NOT MOVE CARRSOUSEL comment_2: BETWEEN 16-17. ! linenum: 18.000 targname: MU-COL config: HRS opmode: ACQ/PEAKUP aperture: 0.25 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 9.2S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 18.5-19 ! linenum: 18.500 targname: ^ config: ^ opmode: IMAGE aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: 1 ! linenum: 19.000 targname: MU-COL config: HRS opmode: OSCAN aperture: 0.25 sp_element: ECH-B wavelength: 3122.222 num_exp: 1 time_per_exp: 217.6S s_to_n: 100 fluxnum_1: 3 priority: 1 param_1: STEP-PATT=7, OSCAN-MIN=18, param_2: OSCAN-MAX=33 ! linenum: 20.000 targname: MU-COL config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: MAP=END-POINT req_1: ONBOARD ACQ FOR 21-25; ! linenum: 21.000 targname: MU-COL config: HRS opmode: OSCAN aperture: ^ sp_element: ECH-B wavelength: 3077.778 num_exp: 1 time_per_exp: 218 S s_to_n: 100 fluxnum_1: 3 priority: 1 param_1: STEP-PATT=7, OSCAN-MIN=18, param_2: OSCAN-MAX=33 comment_1: POSITION CARROUSEL FOR comment_2: MLAMBDA=55400 FOR 21 ! linenum: 23.000 targname: MU-COL config: HRS opmode: ^ aperture: 2.0 sp_element: ^ wavelength: 3211.111 num_exp: ^ time_per_exp: ^ s_to_n: 100 fluxnum_1: 3 priority: ^ param_1: ^ comment_1: POSITION CARROUSEL FOR comment_2: MLAMBDA=57800 FOR 23 ! linenum: 25.000 targname: MU-COL config: HRS opmode: OSCAN aperture: 2.0 sp_element: ECH-B wavelength: 3277.778 num_exp: 1 time_per_exp: 218 S s_to_n: 100 fluxnum_1: 3 priority: 1 param_1: STEP-PATT=7, OSCAN-MIN=18, param_2: OSCAN-MAX=33 comment_1: POSITION CARROUSEL FOR comment_2: MLAMBDA=59000 FOR 25. ! ! end of exposure logsheet ! No scan data records found