! File: 1349C.PROP ! Database: PEPDB ! Date: 16-FEB-1994:14:59:40 coverpage: title_1: CAMERA MODE SENSITIVITY AND IMAGE QUALITY sci_cat: CALIBRATION proposal_for: SV/HRS pi_fname: DENNIS pi_mi: C. pi_lname: EBBETS pi_inst: BALL AEROSPACE SYSTEMS GROUP pi_country: USA pi_phone: 303-939-5964 keywords_1: HRS, CALIBRATION, SCIENCE VERIFICATION hours_pri: 3.10 num_pri: 4 hrs: Y realtime: Y ! end of coverpage abstract: line_1: SV test to calibrate sensitivity of each target acquisition mirror. ! ! end of abstract general_form_proposers: lname: EBBETS fname: D. title: PI mi: C. inst: BASD country: USA ! lname: WALTER fname: F. inst: CASA/U OF COLORADO country: USA ! lname: BRANDT fname: J. mi: C. inst: LASP/UNIV OF CO country: USA ! lname: SAVAGE fname: B. mi: D. inst: UNIV. OF WISCONSIN country: USA ! lname: CARPENTER fname: K. mi: G. inst: NASA/GSFC country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: The star will be centered in the Large Science Aperture and a "flux line_2: measurement" will be made. Field maps will then be produced with dimensions of line_3: ~2, and 0.5 arc sec. The star will then be moved to the Small Science line_4: Aperture, and a flux measurement made there. A 0.5 arc sec square field map line_5: will be made centered on the SSA. The carousel will then be rotated to one of line_6: the other camera mirrors, the detectors switched if necessary, the star line_7: returned to the Large Aperture, and the sequence of flux measurements and line_8: images will be repeated. This process will be repeated for each useable line_9: acquistion mode on that star. line_11: NOTE 1: Lines 4.5, 6.5, added as interactive acquisitions. 10.5,14.5 line_12: are Onboard Acqs. The requirement is to start with the star line_13: centered in the 2.0 aperture (LSA), before the sequence OBS is run. line_14: OBS starts and ends with the target centered in the LSA. All 4 stars line_15: are ST ScI standards. line_17: NOTE 2: I assume, but do not require that all obs. of a given target line_18: are done in sequence. line_19: NOTE:3 Lines 8, 10, 12, 14, 16, 17 use the target acquisition S/W to line_20: make a flux check of the light through the LSA. No maps are made and line_21: no slews are requested. It assumes that the star was left centerded line_22: in the LSA by the previous exposure. Additional 1 minute images have line_23: been added in lines 10.25, 14.25, 17.5 to check the centering. ! question: 3 section: 2 line_1: NOTE 4: Lines 1-4 (SEQ OBS) assumes that the star is centered in line_2: the LSA to begin with. It makes 2 maps of the LSA, on lines 1-3. line_4: Line 4 is a map of the SSA. line_6: The maneuvers should be accomplished via line_7: direct small angle maneuver commands. The sequence should end line_8: with the star centered in the LSA. line_9: NOTE 5: MU COL, HZ 44 are SV Minimum Plan. BD +70D5824 and line_10: 16 Cyg B may be regarded as SV Delta line_11: Plan. ! question: 5 section: 1 line_1: OV-SV Prerequisites: line_3: 1. HRS-01 Relative Aperture Locations - Prop ID 1348 line_4: 2. HRS-02, OLT- FGS to HRS Fine Alignment- Prop ID 1397 line_6: Real time observations for target acquisitions will be used line_7: to guarentee that the target star is will centered in the 2.0 line_8: arcsec Large Science Aperture (LSA). line_10: mu COL, lines 4.5-6, early SV, minimum plan, interactive acquisition line_11: HZ44, lines 6.5-10.40, early SV, minimum plan, interactive acquisition line_12: GRW+70D, lines 10.5-14.25, after Target Locate (prop 1352) completed, line_13: delta plan, onboard acquisition line_14: 16 Cyg B, lines 14.5-17.5, after Target Locate (prop 1352) completed, line_15: delta plan, onboard acquisition line_16: Guiding Tolerance = 0.010 arc seconds for lines 10.3 and 10.4 line_17: Guiding Tolerance = 0.025 arc seconds for all other lines. ! question: 7 section: 1 line_1: Observed count rates provide initial calibration points for target acquisition line_2: mirror sensitivities. Plot count rates vs. unreddened B-V color, normalized to line_3: V=0, EB-V=0. line_5: Produce contour plots of map images to study image shape and size. line_7: No data base information will be updated as a result of these tests. line_9: Check accuracy of slew between apertures. line_10: Measure ratio of SSA/LSA count rates. ! question: 10 section: 1 line_1: Data analysis facilities line_3: personnel line_5: Travel and Publications Support ! !end of general form text general_form_address: lname: WALTER fname: FRED category: CON inst: CASA/U OF COLORADO city: BOULDER state: CO zip: 80309 country: USA ! lname: CARPENTER fname: KENNETH category: CON inst: NASA/GSFC addr_1: CODE 680 city: GREENBELT state: MD zip: 20771 country: USA phone: 301-286-3453 ! lname: SAVAGE fname: BLAIR category: CON inst: DEPT. OF ASTRONOMY addr_1: UNIV. OF WISCONSIN city: MADISON state: WI zip: 53706 country: USA phone: 608-262-0309 ! lname: EBBETS fname: DENNIS mi: C. category: PI inst: BALL AEROSPACE SYSTEMS GROUP addr_1: P.O. BOX 1062 addr_2: HRS PROJECT, FT3 city: BOULDER state: CO zip: 80306 country: USA phone: 303-939-5964 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: MU-COL descr_1: SPECTROPHOTOMETRIC STANDARD STAR pos_1: RA= 5H 45M 59.92S +/- 0.5S, pos_2: DEC=-32D 18' 22.8" +/- 0.3", pos_3: PLATE-ID=01WB equinox: 2000 pm_or_par: Y pos_epoch_yr: 1950.00 ra_pm_val: 0.000267 ra_pm_unct: 0.000267 dec_pm_val: -0.0250 dec_pm_unct: 0.0030 fluxnum_1: 1 fluxval_1: V=5.16 fluxnum_2: 2 fluxval_2: B=4.87 fluxnum_3: 3 fluxval_3: B-V=-0.28 ! targnum: 2 name_1: HZ44 name_2: GSC2541-142 descr_1: ^ pos_1: RA=13H 23M 35.35S +/- 0.5S, pos_2: DEC=+36D 07' 59.4" +/- 0.5", pos_3: PLATE-ID=01PR equinox: ^ comment_1: TARGETS 1 & 3 ARE PRIME SV comment_2: MINIMUM PLAN TARGETS fluxnum_1: 1 fluxval_1: V=11.71 fluxnum_2: 2 fluxval_2: B-V=-0.27 ! targnum: 3 name_1: GRW+70D5824 name_2: GSC4405-1633 descr_1: ^ pos_1: RA=13H38M51.78S +/- 0.5S, pos_2: DEC=+70D17'08.5" +/- 0.3", pos_3: PLATE-ID=0001 equinox: ^ pm_or_par: Y pos_epoch_bj: B pos_epoch_yr: 1983.30 ra_pm_val: -0.025333 ra_pm_unct: 0.000200 dec_pm_val: -0.0120 dec_pm_unct: 0.0030 fluxnum_1: 1 fluxval_1: V=12.8 fluxnum_2: 2 fluxval_2: B=12.81 fluxnum_3: 3 fluxval_3: B-V=-0.09 ! targnum: 4 name_1: 16CYGB descr_1: ^ pos_1: RA=19H41M52.51S +/- 0.5S, pos_2: DEC=+50D31'11.1" +/- 0.3", pos_3: PLATE-ID=00TD equinox: ^ pm_or_par: Y pos_epoch_bj: B pos_epoch_yr: 1950.00 ra_pm_val: -0.009333 ra_pm_unct: 0.000200 dec_pm_val: -0.1600 dec_pm_unct: 0.0030 comment_1: TARGETS 2 & 4 ARE PRIME SV DELTA comment_2: PLAN. NO GSC ID ASSIGNED. fluxnum_1: 1 fluxval_1: V=6.2 fluxnum_2: 2 fluxval_2: B=6.86 fluxnum_3: 3 fluxval_3: B-V=+0.66 ! targnum: 5 name_1: NGC7293 descr_1: ALTERNATE FOR HZ44 pos_1: RA=22H 29M 38.46S +/- 0.5S, pos_2: DEC=-20D 50' 13.3" +/- 0.3", pos_3: PLATE-ID=04I5 equinox: ^ comment_1: ALTERNATE TO HZ44 fluxnum_1: 1 fluxval_1: V=13.4 fluxnum_2: 2 fluxval_2: B=13.06 fluxnum_3: 3 fluxval_3: B-V=-0.34 ! targnum: 6 name_1: HZ21 name_2: GSC2527-2161 descr_1: ^ pos_1: RA=12H 13M 56.42S +/- 0.5S, pos_2: DEC=+32D 56' 30.8" +/- 0.3", pos_3: PLATE-ID=00Y2 equinox: ^ pm_or_par: Y pos_epoch_bj: B pos_epoch_yr: 1983.10 ra_pm_val: -0.005600 ra_pm_unct: 0.000200 dec_pm_val: 0.0700 dec_pm_unct: 0.0030 comment_1: ALTERNATE TO HZ44 fluxnum_1: 1 fluxval_1: V=14.22 fluxnum_2: 2 fluxval_2: B-V=-0.36 ! targnum: 7 name_1: BD+75D325 name_2: GSC4380-2196 descr_1: ^ pos_1: RA=08H 10M 49.31S +/- 0.5S, pos_2: DEC=+74D 57' 57.5" +/- 0.3", pos_3: PLATE-ID=00LQ equinox: ^ comment_1: ALTERNATE FOR HZ44 fluxnum_1: 1 fluxval_1: V=9.55 fluxnum_2: 2 fluxval_2: B-V=-0.36 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: OBS targname: # config: HRS opmode: IMAGE aperture: 2.0 sp_element: # num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: # param_3: NY=22, NX=22, param_4: DELTA-X=4, DELTA-Y=4, param_5: PRECISION=NORMAL, req_1: SEQ 1-4.2 NO GAP; comment_1: THE STAR WILL HAVE BEEN CENTERED IN comment_2: THE LSA BY A SEPARATE ACQ SEQUENCE comment_3: BEFORE THE OBS SEQUENCE IS INITIATED. comment_4: NO DEFLECTION CAL. STEP-TIME=0.2. ! linenum: 3.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: 96.8S fluxnum_1: ^ priority: ^ param_3: NY=22, NX=22, param_4: DELTA-X=1, DELTA-Y=1, param_5: PRECISION=HIGH, comment_1: STEP-TIME=0.2 ! linenum: 4.000 sequence_1: ^ targname: ^ config: ^ opmode: IMAGE aperture: 0.25 sp_element: ^ num_exp: ^ time_per_exp: 96.8S fluxnum_1: ^ priority: ^ param_2: NX=22, NY=22, param_3: DELTA-X=1, param_4: DELTA-Y=1, param_6: PRECISION=HIGH, comment_1: NO DEFLECTION CALIBRATION. comment_2: STEP-TIME=0.2. ! linenum: 4.200 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: IMAGE aperture: 2.0 sp_element: ^ num_exp: 1 time_per_exp: 96.8S fluxnum_1: ^ priority: ^ param_3: NY=22, NX=22, param_4: DELTA-X=4, DELTA-Y=4, param_5: PRECISION=NORMAL, comment_1: NO DEFLECTION CALIBRATION. comment_2: STEP-TIME=0.2. ! linenum: 4.500 targname: MU-COL config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 1325S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, req_1: INT ACQ FOR 5-6 ! linenum: 5.000 sequence_1: USE sequence_2: OBS targname: MU-COL sp_element: MIRROR-A1 priority: 1 ! linenum: 6.000 sequence_1: USE sequence_2: OBS targname: MU-COL sp_element: MIRROR-A2 time_per_exp: X1 priority: 1 ! linenum: 6.500 targname: HZ44 config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-N1 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: FAINT=1000, param_3: BRIGHT=DEF, param_4: MAP=END-POINT, req_1: ONBOARD ACQ FOR 7-10.4; req_2: COND IF SV DELTA PLAN/ req_3: 6.5-10.4; comment_1: STEP-TIME=0.2 ! linenum: 7.000 sequence_1: USE sequence_2: OBS targname: HZ44 sp_element: MIRROR-N1 time_per_exp: X1 priority: 1 ! linenum: 8.000 targname: HZ44 config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 12.75S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=1, LOCATE=NO, param_2: PEAKUP=NO req_1: ONBOARD ACQ FOR 8.5; comment_1: FLUX CHECK ONLY. NO comment_2: DEFLECTION CALIBRATION. comment_3: STEP-TIME=12.75 ! linenum: 8.500 targname: ^ config: ^ opmode: ^ aperture: 2.0 sp_element: MIRROR-N2 num_exp: 1 time_per_exp: 0.2S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=1, LOCATE=NO, param_2: PEAKUP=NO, req_1: ONBOARD ACQ FOR 9; comment_1: DO DEFLECTION CAL, FLUX comment_2: CHECK, NO LOCATE OR PEAKUP. comment_3: STEP-SIZE=0.2. ! linenum: 9.000 sequence_1: USE sequence_2: OBS targname: ^ sp_element: MIRROR-N2 priority: 1 ! linenum: 10.000 targname: ^ config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=1, LOCATE=NO, param_2: PEAKUP=NO, req_1: ONBOARD ACQ FOR 10.25; comment_1: FLUX CHECK ONLY. STEP-TIME=5. comment_2: NO DEFLECTION CAL. ! linenum: 10.250 targname: ^ config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: 1 comment_1: STEP-TIME=0.2 ! linenum: 10.300 sequence_1: USE sequence_2: OBS targname: HZ44 sp_element: MIRROR-N1 time_per_exp: X1 priority: 1 req_1: GUID TOL 0.007" / 10.3-10.4; ! linenum: 10.400 sequence_1: USE sequence_2: OBS targname: HZ44 sp_element: MIRROR-N2 time_per_exp: X1 priority: 1 comment_1: USE FINE TRACK LOCK FOR 10.3,10.4. comment_2: ALL OTHER LINES SHOULD USE COARSE comment_3: TRACK AS PART OF TEST IS TO COMPARE comment_4: COARSE TRACK VS FINE LOCK FOR THE comment_5: GHRS. ! linenum: 10.500 targname: GRW+70D5824 config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-N2 num_exp: 1 time_per_exp: 1325S fluxnum_1: 1 priority: 1 param_5: SEARCH-SIZE=5, req_1: INT ACQ FOR 11-12; comment_1: STEP-TIME=0.2 ! linenum: 11.000 sequence_1: USE sequence_2: OBS targname: GRW+70D5824 sp_element: MIRROR-N2 priority: 1 ! linenum: 12.000 targname: GRW+70D5824 config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 12.75S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=1, LOCATE=NO, param_2: PEAKUP=NO, req_1: ONBOARD ACQ FOR 12.5; comment_1: FLUX CHECK ONLY. NO comment_2: DEFLECTION CAL. STEP-TIME=12.75 ! linenum: 12.500 targname: GRW+70D5824 config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-N1 num_exp: 1 time_per_exp: 1S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=1, LOCATE=NO, param_2: PEAKUP=NO req_1: ONBOARD ACQ FOR 13; comment_1: DO DEFLECTION CAL, FLUX CHECK ONLY. comment_2: NO LOCATE OR PEAKUP. STEP-TIME=1. ! linenum: 13.000 sequence_1: USE sequence_2: OBS targname: GRW+70D5824 sp_element: MIRROR-N1 time_per_exp: X2 priority: 1 ! linenum: 14.000 targname: ^ config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 12.75S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=1, LOCATE=NO, param_2: PEAKUP=NO, req_1: ONBOARD ACQ FOR 14.25; comment_1: FLUX CHECK ONLY. NO comment_2: DEFLECTION CAL. STEP-TIME=12.75. ! linenum: 14.250 targname: ^ config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: 1 comment_1: STEP-TIME=0.2 ! linenum: 14.500 targname: 16CYGB config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 25S fluxnum_1: 1 priority: 1 param_2: BRIGHT=DEF, param_3: FAINT=10, param_4: SEARCH-SIZE=5, req_1: ONBOARD ACQ FOR 15-17.5; req_2: COND IF SV DELTA PLAN comment_1: STEP-TIME=1 ! linenum: 15.000 sequence_1: USE sequence_2: OBS targname: 16CYGB sp_element: MIRROR-A2 time_per_exp: X2 priority: 1 req_1: COND IF SV DELTA PLAN ! linenum: 16.000 targname: ^ config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-N2 num_exp: 1 time_per_exp: .2S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=1, LOCATE=NO, param_2: PEAKUP=NO, req_1: ONBOARD ACQ FOR 17; req_2: COND IF SV DELTA PLAN comment_1: FLUX CHECK ONLY. NO comment_2: DEFLECTION CAL. STEP-TIME=0.2 ! linenum: 17.000 targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: MIRROR-N1 num_exp: 1 time_per_exp: 1S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=1, LOCATE=NO, param_2: PEAKUP=NO, req_1: ONBOARD ACQ FOR 17.5; req_2: COND IF SV DELTA PLAN comment_1: FLUX CHECK. DO DEFLECTION CAL. comment_2: STEP-TIME=1. ! linenum: 17.500 targname: ^ config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-N1 num_exp: 1 time_per_exp: 484S fluxnum_1: 1 priority: 1 req_1: COND IF SV DELTA PLAN comment_1: STEP-TIME=1 ! ! end of exposure logsheet ! No scan data records found